Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=15235): Process ended prematurely: osmo-stp_10.42.42.5(pid=15235) [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15235)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-umtrx+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 23:53:50.103561 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.115012 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:53:50.270545 tst ping_idle_ping.py: using LAC 37104 23:53:50.384866 tst ping_idle_ping.py: using RAC 129 23:53:50.500244 tst ping_idle_ping.py: using CellId 37104 23:53:50.614167 tst ping_idle_ping.py: using BVCI 37105 23:53:50.636703 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.647511 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.658209 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.668821 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.679511 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.690575 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.702052 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:53:50.712819 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:53:50.997739 tst ping_idle_ping.py:24: start network... 23:53:51.127613 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:53:51.614336 run create_hlr_db(pid=15229): Launched 23:53:51.793953 bus /gobi_6: Setting Powered False 23:53:52.816118 run create_hlr_db(pid=15229): Terminated: ok {rc=0} 23:53:53.206719 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15231): Launched 23:53:53.496885 run osmo-hlr_10.42.42.2(pid=15232): Launched 23:53:53.611846 run osmo-stp_10.42.42.5: Starting osmo-stp 23:53:54.127570 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15234): Launched 23:53:54.419174 run osmo-stp_10.42.42.5(pid=15235): Launched 23:53:54.525049 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:53:55.032035 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15237): Launched 23:53:55.135235 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:53:55.388323 run patchelf(pid=15238): Launched 23:53:55.558672 run osmo-stp_10.42.42.5(pid=15235): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15235)] 23:53:55.683339 run osmo-stp_10.42.42.5(pid=15235): stdout: | (launched: 2022-12-13_23:53:54.277212) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:53:55.808401 run osmo-stp_10.42.42.5(pid=15235): stderr: | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235354446 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:53:55.929599 run osmo-stp_10.42.42.5(pid=15235): stdout: | (launched: 2022-12-13_23:53:54.277212) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:53:56.049130 run osmo-stp_10.42.42.5(pid=15235): stderr: | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235354446 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235354446 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235354449 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:53:56.189190 run patchelf(pid=15238): Terminating (SIGINT) 23:53:56.353291 run patchelf(pid=15238): Terminated: ok {rc=0} 23:53:56.383158 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=15235): Process ended prematurely: osmo-stp_10.42.42.5(pid=15235) [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15235)] [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 23:53:56.391661 tst ping_idle_ping.py:27: Test FAILED (6.3 sec) 23:53:56.451079 run osmo-hlr_10.42.42.2(pid=15232): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15232)] 23:53:56.499404 run osmo-hlr_10.42.42.2(pid=15232): stdout: | (launched: 2022-12-13_23:53:53.354544) 23:53:56.548264 run osmo-hlr_10.42.42.2(pid=15232): stderr: | �[0;m�[1;31m20221213235353529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213235353529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213235353529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213235353529 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213235353530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213235353530 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213235353542 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-umtrx+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213235353550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213235353550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213235353550 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:53:56.590000 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15231): Terminating (SIGTERM) 23:53:56.629104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15234): Terminating (SIGTERM) 23:53:56.668433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15237): Terminating (SIGTERM) 23:53:56.677477 --- ParallelTerminationStrategy: PID 15231 died... 23:53:56.729826 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15231): Terminated: ok {rc=0} 23:53:56.739232 --- ParallelTerminationStrategy: PID 15234 died... 23:53:56.791799 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15234): Terminated: ok {rc=0} 23:53:56.801198 --- ParallelTerminationStrategy: PID 15237 died... 23:53:56.853074 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15237): Terminated: ok {rc=0} 23:53:56.939885 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15235): Process ended prematurely: osmo-stp_10.42.42.5(pid=15235) [trial-2396↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15235)]