Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=15118): Process ended prematurely: osmo-stp_10.42.42.5(pid=15118) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15118)]
Standard Output
---------------------------------------------- trial-2396 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 23:51:59.899044 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:51:59.909833 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 23:52:00.048451 tst cs_paging_gprs_active.py: using LAC 37095 23:52:00.174969 tst cs_paging_gprs_active.py: using RAC 120 23:52:00.301941 tst cs_paging_gprs_active.py: using CellId 37095 23:52:00.432796 tst cs_paging_gprs_active.py: using BVCI 37096 23:52:00.458107 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.469654 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.480564 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.491745 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.503338 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.514919 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.526709 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.537985 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 23:52:00.549761 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:52:00.667897 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 23:52:00.958580 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:52:01.088012 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:52:01.441948 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15108): Launched 23:52:01.743451 run iperf3-srv_10.42.42.10(pid=15109): Launched 23:52:01.949193 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:52:02.091518 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:52:02.428787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15110): Launched 23:52:02.706203 run iperf3-srv_10.42.42.10(pid=15111): Launched 23:52:02.904348 tst cs_paging_gprs_active.py:38: start network... 23:52:03.039403 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:52:03.546231 run create_hlr_db(pid=15112): Launched 23:52:03.732396 bus /gobi_6: Setting Powered False 23:52:04.754789 run create_hlr_db(pid=15112): Terminated: ok {rc=0} 23:52:05.158948 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15114): Launched 23:52:05.460585 run osmo-hlr_10.42.42.2(pid=15115): Launched 23:52:05.572425 run osmo-stp_10.42.42.5: Starting osmo-stp 23:52:06.094370 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15117): Launched 23:52:06.395136 run osmo-stp_10.42.42.5(pid=15118): Launched 23:52:06.504551 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:52:07.027546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15120): Launched 23:52:07.134917 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:52:07.396427 run patchelf(pid=15121): Launched 23:52:07.572152 run osmo-stp_10.42.42.5(pid=15118): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15118)] 23:52:07.701282 run osmo-stp_10.42.42.5(pid=15118): stdout: | (launched: 2022-12-13_23:52:06.247536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:52:07.830012 run osmo-stp_10.42.42.5(pid=15118): stderr: | �[0;m�[38;5;43m20221213235206416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235206416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235206417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235206417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:52:07.954996 run osmo-stp_10.42.42.5(pid=15118): stdout: | (launched: 2022-12-13_23:52:06.247536) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:52:08.077764 run osmo-stp_10.42.42.5(pid=15118): stderr: | �[0;m�[38;5;43m20221213235206416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213235206416 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213235206417 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213235206417 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213235206418 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:52:08.221177 run patchelf(pid=15121): Terminating (SIGINT) 23:52:08.390305 run patchelf(pid=15121): Terminated: ok {rc=0} 23:52:08.421191 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15118): Process ended prematurely: osmo-stp_10.42.42.5(pid=15118) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15118)] [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 23:52:08.430226 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 23:52:08.490102 run osmo-hlr_10.42.42.2(pid=15115): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15115)] 23:52:08.538724 run osmo-hlr_10.42.42.2(pid=15115): stdout: | (launched: 2022-12-13_23:52:05.312253) 23:52:08.588103 run osmo-hlr_10.42.42.2(pid=15115): stderr: | �[0;m�[1;31m20221213235205490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213235205490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213235205490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213235205490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213235205490 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213235205491 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213235205506 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213235205514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213235205515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213235205515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:52:08.629936 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15108): Terminating (SIGTERM) 23:52:08.669217 run iperf3-srv_10.42.42.10(pid=15109): Terminating (SIGTERM) 23:52:08.708360 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15110): Terminating (SIGTERM) 23:52:08.747423 run iperf3-srv_10.42.42.10(pid=15111): Terminating (SIGTERM) 23:52:08.786854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15114): Terminating (SIGTERM) 23:52:08.826044 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15117): Terminating (SIGTERM) 23:52:08.865256 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15120): Terminating (SIGTERM) 23:52:08.874409 --- ParallelTerminationStrategy: PID 15108 died... 23:52:08.927070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15108): Terminated: ok {rc=0} 23:52:08.936569 --- ParallelTerminationStrategy: PID 15109 died... 23:52:08.988990 run iperf3-srv_10.42.42.10(pid=15109): Terminated {rc=256} 23:52:08.998493 --- ParallelTerminationStrategy: PID 15110 died... 23:52:09.050884 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15110): Terminated: ok {rc=0} 23:52:09.060315 --- ParallelTerminationStrategy: PID 15111 died... 23:52:09.112505 run iperf3-srv_10.42.42.10(pid=15111): Terminated {rc=256} 23:52:09.122008 --- ParallelTerminationStrategy: PID 15114 died... 23:52:09.174483 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15114): Terminated: ok {rc=0} 23:52:09.183942 --- ParallelTerminationStrategy: PID 15117 died... 23:52:09.236100 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15117): Terminated: ok {rc=0} 23:52:09.245650 --- ParallelTerminationStrategy: PID 15120 died... 23:52:09.297864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15120): Terminated: ok {rc=0} 23:52:09.385446 bus /gobi_0: Setting Powered False 23:52:10.487159 bus /gobi_0: Setting Powered False 23:52:11.596987 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15118): Process ended prematurely: osmo-stp_10.42.42.5(pid=15118) [trial-2396↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15118)]