Failed
dynts:sysmo+mod-bts0-dynts67-osmo.switch_tch_pdch.py (from dynts_sysmo+mod-bts0-dynts67-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12445): Process ended prematurely: osmo-stp_10.42.42.5(pid=12445) [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12445)]
Standard Output
---------------------------------------------- trial-2396 dynts:sysmo+mod-bts0-dynts67-osmo switch_tch_pdch.py ---------------------------------------------- 23:21:54.609862 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:54.621600 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x bts (candidates: 1) 23:21:54.775651 tst switch_tch_pdch.py: using LAC 36932 23:21:54.898564 tst switch_tch_pdch.py: using RAC 212 23:21:55.019813 tst switch_tch_pdch.py: using CellId 36932 23:21:55.139136 tst switch_tch_pdch.py: using BVCI 36933 23:21:55.162555 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.173688 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.184439 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.195183 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.206228 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.216854 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.228187 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x ip_address (candidates: 8) 23:21:55.239276 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 23:21:55.356800 tst dynts:sysmo+mod-bts0-dynts67-osmo: Using 1 x modem (candidates: 2) 23:21:55.654624 tst switch_tch_pdch.py:51: start network... 23:21:55.791237 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:21:56.279237 run create_hlr_db(pid=12439): Launched 23:21:56.413490 bus /gobi_6: Setting Powered False 23:21:57.491200 run create_hlr_db(pid=12439): Terminated: ok {rc=0} 23:21:57.881412 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12441): Launched 23:21:58.185874 run osmo-hlr_10.42.42.2(pid=12442): Launched 23:21:58.297357 run osmo-stp_10.42.42.5: Starting osmo-stp 23:21:58.798430 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12444): Launched 23:21:59.102281 run osmo-stp_10.42.42.5(pid=12445): Launched 23:21:59.211930 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:21:59.717519 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12447): Launched 23:21:59.825532 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:22:00.091034 run patchelf(pid=12448): Launched 23:22:00.268049 run osmo-stp_10.42.42.5(pid=12445): ERR: Terminated: ERROR {rc=1} [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12445)] 23:22:00.397508 run osmo-stp_10.42.42.5(pid=12445): stdout: | (launched: 2022-12-13_23:21:58.951596) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:22:00.526974 run osmo-stp_10.42.42.5(pid=12445): stderr: | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232159126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:22:00.652325 run osmo-stp_10.42.42.5(pid=12445): stdout: | (launched: 2022-12-13_23:21:58.951596) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:22:00.776287 run osmo-stp_10.42.42.5(pid=12445): stderr: | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232159125 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232159126 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232159126 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:22:00.934950 run patchelf(pid=12448): Terminating (SIGINT) 23:22:01.122388 run patchelf(pid=12448): Terminated: ok {rc=0} 23:22:01.156511 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=12445): Process ended prematurely: osmo-stp_10.42.42.5(pid=12445) [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12445)] [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54] 23:22:01.167191 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 23:22:01.235363 run osmo-hlr_10.42.42.2(pid=12442): ERR: Terminated: ERROR {rc=237} [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12442)] 23:22:01.291529 run osmo-hlr_10.42.42.2(pid=12442): stdout: | (launched: 2022-12-13_23:21:58.035124) 23:22:01.347882 run osmo-hlr_10.42.42.2(pid=12442): stderr: | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213232158212 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213232158225 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/dynts:sysmo+mod-bts0-dynts67-osmo/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213232158235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213232158235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213232158235 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:22:01.395855 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12441): Terminating (SIGTERM) 23:22:01.442564 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12444): Terminating (SIGTERM) 23:22:01.490884 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12447): Terminating (SIGTERM) 23:22:01.501933 --- ParallelTerminationStrategy: PID 12441 died... 23:22:01.563158 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12441): Terminated: ok {rc=0} 23:22:01.574623 --- ParallelTerminationStrategy: PID 12444 died... 23:22:01.636665 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12444): Terminated: ok {rc=0} 23:22:01.648725 --- ParallelTerminationStrategy: PID 12447 died... 23:22:01.709483 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12447): Terminated: ok {rc=0} 23:22:01.820027 bus /gobi_0: Setting Powered False 23:22:02.924308 bus /gobi_0: Setting Powered False 23:22:04.035600 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12445): Process ended prematurely: osmo-stp_10.42.42.5(pid=12445) [trial-2396↪dynts:sysmo+mod-bts0-dynts67-osmo↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12445)]