Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12365): Process ended prematurely: osmo-stp_10.42.42.5(pid=12365) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12365)]
Standard Output
---------------------------------------------- trial-2396 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:20:42.170698 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.181963 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:20:42.326820 tst cs_paging_gprs_active.py: using LAC 36926 23:20:42.447597 tst cs_paging_gprs_active.py: using RAC 206 23:20:42.568719 tst cs_paging_gprs_active.py: using CellId 36926 23:20:42.690466 tst cs_paging_gprs_active.py: using BVCI 36927 23:20:42.714432 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.725385 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.736008 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.746701 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.757543 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.768418 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.779449 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.790320 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:42.801353 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:42.918781 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:43.221181 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:20:43.361108 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:43.708033 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12355): Launched 23:20:43.995324 run iperf3-srv_10.42.42.10(pid=12356): Launched 23:20:44.199466 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:20:44.338563 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:44.684209 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12357): Launched 23:20:44.973379 run iperf3-srv_10.42.42.10(pid=12358): Launched 23:20:45.178019 tst cs_paging_gprs_active.py:38: start network... 23:20:45.317441 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:20:45.844919 run create_hlr_db(pid=12359): Launched 23:20:46.051052 bus /gobi_6: Setting Powered False 23:20:47.111757 run create_hlr_db(pid=12359): Terminated: ok {rc=0} 23:20:47.565712 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12361): Launched 23:20:47.899764 run osmo-hlr_10.42.42.2(pid=12362): Launched 23:20:48.021459 run osmo-stp_10.42.42.5: Starting osmo-stp 23:20:48.599530 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12364): Launched 23:20:48.932725 run osmo-stp_10.42.42.5(pid=12365): Launched 23:20:49.054919 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:20:49.637437 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12367): Launched 23:20:49.756409 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:20:50.047321 run patchelf(pid=12368): Launched 23:20:50.241375 run osmo-stp_10.42.42.5(pid=12365): ERR: Terminated: ERROR {rc=1} [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12365)] 23:20:50.383363 run osmo-stp_10.42.42.5(pid=12365): stdout: | (launched: 2022-12-13_23:20:48.768317) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:50.525551 run osmo-stp_10.42.42.5(pid=12365): stderr: | �[0;m�[38;5;43m20221213232048962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232048962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232048963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232048963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232048965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232048966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232048966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:50.662883 run osmo-stp_10.42.42.5(pid=12365): stdout: | (launched: 2022-12-13_23:20:48.768317) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:50.799049 run osmo-stp_10.42.42.5(pid=12365): stderr: | �[0;m�[38;5;43m20221213232048962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221213232048962 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221213232048963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221213232048963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221213232048965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221213232048966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221213232048966 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:50.957876 run patchelf(pid=12368): Terminating (SIGINT) 23:20:51.144489 run patchelf(pid=12368): Terminated: ok {rc=0} 23:20:51.178646 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12365): Process ended prematurely: osmo-stp_10.42.42.5(pid=12365) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12365)] [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:20:51.188619 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 23:20:51.252873 run osmo-hlr_10.42.42.2(pid=12362): ERR: Terminated: ERROR {rc=237} [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12362)] 23:20:51.305164 run osmo-hlr_10.42.42.2(pid=12362): stdout: | (launched: 2022-12-13_23:20:47.734927) 23:20:51.358052 run osmo-hlr_10.42.42.2(pid=12362): stderr: | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221213232047936 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221213232047948 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2396/run.2022-12-13_23-11-51/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221213232047957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221213232047957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221213232047957 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:20:51.403286 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12355): Terminating (SIGTERM) 23:20:51.446150 run iperf3-srv_10.42.42.10(pid=12356): Terminating (SIGTERM) 23:20:51.488585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12357): Terminating (SIGTERM) 23:20:51.531289 run iperf3-srv_10.42.42.10(pid=12358): Terminating (SIGTERM) 23:20:51.573925 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12361): Terminating (SIGTERM) 23:20:51.616493 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12364): Terminating (SIGTERM) 23:20:51.658965 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12367): Terminating (SIGTERM) 23:20:51.668625 --- ParallelTerminationStrategy: PID 12355 died... 23:20:51.726063 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12355): Terminated: ok {rc=0} 23:20:51.736160 --- ParallelTerminationStrategy: PID 12356 died... 23:20:51.792680 run iperf3-srv_10.42.42.10(pid=12356): Terminated {rc=256} 23:20:51.802768 --- ParallelTerminationStrategy: PID 12357 died... 23:20:51.859272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12357): Terminated: ok {rc=0} 23:20:51.869467 --- ParallelTerminationStrategy: PID 12358 died... 23:20:51.926340 run iperf3-srv_10.42.42.10(pid=12358): Terminated {rc=256} 23:20:51.936528 --- ParallelTerminationStrategy: PID 12361 died... 23:20:51.993601 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12361): Terminated: ok {rc=0} 23:20:52.003682 --- ParallelTerminationStrategy: PID 12364 died... 23:20:52.060311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12364): Terminated: ok {rc=0} 23:20:52.070418 --- ParallelTerminationStrategy: PID 12367 died... 23:20:52.126989 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12367): Terminated: ok {rc=0} 23:20:52.213902 bus /gobi_0: Setting Powered False 23:20:53.320755 bus /gobi_0: Setting Powered False 23:20:54.430208 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12365): Process ended prematurely: osmo-stp_10.42.42.5(pid=12365) [trial-2396↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12365)]