Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22008): Process ended prematurely: osmo-stp_10.42.42.5(pid=22008) [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22008)]
Standard Output
---------------------------------------------- trial-2397 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:06:40.941187 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:40.952350 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:06:41.093893 tst cs_paging_gprs_active.py: using LAC 37480 01:06:41.212401 tst cs_paging_gprs_active.py: using RAC 250 01:06:41.333299 tst cs_paging_gprs_active.py: using CellId 37480 01:06:41.452753 tst cs_paging_gprs_active.py: using BVCI 37481 01:06:41.475966 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.487291 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.498402 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.509459 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.520486 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.531525 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.542689 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.553741 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:06:41.564939 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:06:41.685939 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:06:41.969474 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:06:42.096028 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:42.412895 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21998): Launched 01:06:42.675011 run iperf3-srv_10.42.42.10(pid=21999): Launched 01:06:42.860188 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:06:42.986018 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:06:43.302219 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22000): Launched 01:06:43.564733 run iperf3-srv_10.42.42.10(pid=22001): Launched 01:06:43.749293 tst cs_paging_gprs_active.py:38: start network... 01:06:43.874785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:06:44.357723 run create_hlr_db(pid=22002): Launched 01:06:44.531163 bus /gobi_6: Setting Powered False 01:06:45.553200 run create_hlr_db(pid=22002): Terminated: ok {rc=0} 01:06:46.015972 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22004): Launched 01:06:46.448686 run osmo-hlr_10.42.42.2(pid=22005): Launched 01:06:46.637630 run osmo-stp_10.42.42.5: Starting osmo-stp 01:06:47.184020 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22007): Launched 01:06:47.503924 run osmo-stp_10.42.42.5(pid=22008): Launched 01:06:47.623230 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:06:48.194828 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22010): Launched 01:06:48.311752 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:06:48.598717 run patchelf(pid=22011): Launched 01:06:48.790251 run osmo-stp_10.42.42.5(pid=22008): ERR: Terminated: ERROR {rc=1} [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22008)] 01:06:48.929541 run osmo-stp_10.42.42.5(pid=22008): stdout: | (launched: 2022-12-14_01:06:47.343222) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:49.069097 run osmo-stp_10.42.42.5(pid=22008): stderr: | �[0;m�[38;5;43m20221214010647526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010647526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010647527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010647527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010647527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010647528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010647528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:49.204076 run osmo-stp_10.42.42.5(pid=22008): stdout: | (launched: 2022-12-14_01:06:47.343222) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:06:49.337988 run osmo-stp_10.42.42.5(pid=22008): stderr: | �[0;m�[38;5;43m20221214010647526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214010647526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214010647527 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214010647527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214010647527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214010647528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214010647528 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:06:49.494028 run patchelf(pid=22011): Terminating (SIGINT) 01:06:49.676239 run patchelf(pid=22011): Terminated: ok {rc=0} 01:06:49.710136 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=22008): Process ended prematurely: osmo-stp_10.42.42.5(pid=22008) [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22008)] [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:06:49.720146 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:06:49.783753 run osmo-hlr_10.42.42.2(pid=22005): ERR: Terminated: ERROR {rc=237} [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22005)] 01:06:49.835349 run osmo-hlr_10.42.42.2(pid=22005): stdout: | (launched: 2022-12-14_01:06:46.186125) 01:06:49.887837 run osmo-hlr_10.42.42.2(pid=22005): stderr: | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214010646379 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214010646398 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2397/run.2022-12-14_00-40-22/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214010646421 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214010646424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214010646424 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:06:49.932587 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21998): Terminating (SIGTERM) 01:06:49.974567 run iperf3-srv_10.42.42.10(pid=21999): Terminating (SIGTERM) 01:06:50.016659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22000): Terminating (SIGTERM) 01:06:50.059078 run iperf3-srv_10.42.42.10(pid=22001): Terminating (SIGTERM) 01:06:50.101354 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22004): Terminating (SIGTERM) 01:06:50.143523 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22007): Terminating (SIGTERM) 01:06:50.185546 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22010): Terminating (SIGTERM) 01:06:50.195215 --- ParallelTerminationStrategy: PID 21998 died... 01:06:50.251994 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=21998): Terminated: ok {rc=0} 01:06:50.262162 --- ParallelTerminationStrategy: PID 21999 died... 01:06:50.318376 run iperf3-srv_10.42.42.10(pid=21999): Terminated {rc=256} 01:06:50.328519 --- ParallelTerminationStrategy: PID 22000 died... 01:06:50.385076 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22000): Terminated: ok {rc=0} 01:06:50.395139 --- ParallelTerminationStrategy: PID 22001 died... 01:06:50.451416 run iperf3-srv_10.42.42.10(pid=22001): Terminated {rc=256} 01:06:50.461574 --- ParallelTerminationStrategy: PID 22004 died... 01:06:50.517748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22004): Terminated: ok {rc=0} 01:06:50.527857 --- ParallelTerminationStrategy: PID 22007 died... 01:06:50.583633 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22007): Terminated: ok {rc=0} 01:06:50.594034 --- ParallelTerminationStrategy: PID 22010 died... 01:06:50.649853 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22010): Terminated: ok {rc=0} 01:06:50.735288 bus /gobi_0: Setting Powered False 01:06:51.840753 bus /gobi_0: Setting Powered False 01:06:52.947620 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22008): Process ended prematurely: osmo-stp_10.42.42.5(pid=22008) [trial-2397↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22008)]