Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=29776): Process ended prematurely: osmo-stp_10.42.42.5(pid=29776) [trial-2398↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29776)]
Standard Output
---------------------------------------------- trial-2398 gprs:trx-b200 iperf3.py ---------------------------------------------- 02:30:08.451567 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:08.462676 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 02:30:08.606952 tst iperf3.py: using LAC 37922 02:30:08.732149 tst iperf3.py: using RAC 182 02:30:08.857024 tst iperf3.py: using CellId 37922 02:30:08.982375 tst iperf3.py: using BVCI 37923 02:30:09.006965 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.017986 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.028552 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.039241 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.050224 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.061533 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.072790 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.083749 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 02:30:09.094944 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 02:30:09.385413 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 02:30:09.519179 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:30:09.848688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29768): Launched 02:30:10.122609 run iperf3-srv_10.42.42.10(pid=29769): Launched 02:30:10.319252 tst iperf3.py:8: start network... 02:30:10.452806 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:30:10.954120 run create_hlr_db(pid=29770): Launched 02:30:11.138560 bus /gobi_6: Setting Powered False 02:30:12.160597 run create_hlr_db(pid=29770): Terminated: ok {rc=0} 02:30:12.560937 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29772): Launched 02:30:12.858623 run osmo-hlr_10.42.42.2(pid=29773): Launched 02:30:12.969404 run osmo-stp_10.42.42.5: Starting osmo-stp 02:30:13.487509 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29775): Launched 02:30:13.786469 run osmo-stp_10.42.42.5(pid=29776): Launched 02:30:13.895152 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:30:14.412353 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29778): Launched 02:30:14.518515 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:30:14.777601 run patchelf(pid=29779): Launched 02:30:14.951640 run osmo-stp_10.42.42.5(pid=29776): ERR: Terminated: ERROR {rc=1} [trial-2398↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29776)] 02:30:15.078727 run osmo-stp_10.42.42.5(pid=29776): stdout: | (launched: 2022-12-14_02:30:13.639147) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:15.206238 run osmo-stp_10.42.42.5(pid=29776): stderr: | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023013810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:15.330310 run osmo-stp_10.42.42.5(pid=29776): stdout: | (launched: 2022-12-14_02:30:13.639147) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:30:15.452733 run osmo-stp_10.42.42.5(pid=29776): stderr: | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214023013809 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214023013810 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214023013810 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:30:15.595822 run patchelf(pid=29779): Terminating (SIGINT) 02:30:15.763737 run patchelf(pid=29779): Terminated: ok {rc=0} 02:30:15.794718 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=29776): Process ended prematurely: osmo-stp_10.42.42.5(pid=29776) [trial-2398↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29776)] [trial-2398↪gprs:trx-b200↪iperf3.py:8] 02:30:15.803917 tst iperf3.py:8: Test FAILED (7.4 sec) 02:30:15.888124 run osmo-hlr_10.42.42.2(pid=29773): ERR: Terminated: ERROR {rc=237} [trial-2398↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29773)] 02:30:15.942207 run osmo-hlr_10.42.42.2(pid=29773): stdout: | (launched: 2022-12-14_02:30:12.712273) 02:30:15.996292 run osmo-hlr_10.42.42.2(pid=29773): stderr: | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214023012885 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214023012897 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2398/run.2022-12-14_02-07-46/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214023012906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214023012906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214023012906 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:30:16.043517 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29768): Terminating (SIGTERM) 02:30:16.087697 run iperf3-srv_10.42.42.10(pid=29769): Terminating (SIGTERM) 02:30:16.133888 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29772): Terminating (SIGTERM) 02:30:16.179422 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29775): Terminating (SIGTERM) 02:30:16.227322 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29778): Terminating (SIGTERM) 02:30:16.238422 --- ParallelTerminationStrategy: PID 29768 died... 02:30:16.300596 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29768): Terminated: ok {rc=0} 02:30:16.312356 --- ParallelTerminationStrategy: PID 29769 died... 02:30:16.371380 run iperf3-srv_10.42.42.10(pid=29769): Terminated {rc=256} 02:30:16.382490 --- ParallelTerminationStrategy: PID 29772 died... 02:30:16.442254 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29772): Terminated: ok {rc=0} 02:30:16.453235 --- ParallelTerminationStrategy: PID 29775 died... 02:30:16.513537 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29775): Terminated: ok {rc=0} 02:30:16.524743 --- ParallelTerminationStrategy: PID 29778 died... 02:30:16.584751 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29778): Terminated: ok {rc=0} 02:30:16.676429 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29776): Process ended prematurely: osmo-stp_10.42.42.5(pid=29776) [trial-2398↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29776)]