Failed
dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=6284): Process ended prematurely: osmo-stp_10.42.42.5(pid=6284) [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6284)]
Standard Output
---------------------------------------------- trial-2399 dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 04:02:17.863272 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:17.875138 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 04:02:18.041788 tst switch_tch_pdch.py: using LAC 38407 04:02:18.165682 tst switch_tch_pdch.py: using RAC 157 04:02:18.291117 tst switch_tch_pdch.py: using CellId 38407 04:02:18.411466 tst switch_tch_pdch.py: using BVCI 38408 04:02:18.434437 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.445752 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.456645 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.467657 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.479252 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.490884 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.502657 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 04:02:18.514260 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 04:02:18.636155 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 04:02:18.913486 tst switch_tch_pdch.py:51: start network... 04:02:19.037574 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:02:19.521235 run create_hlr_db(pid=6278): Launched 04:02:19.707827 bus /gobi_6: Setting Powered False 04:02:20.728118 run create_hlr_db(pid=6278): Terminated: ok {rc=0} 04:02:21.133165 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6280): Launched 04:02:21.434262 run osmo-hlr_10.42.42.2(pid=6281): Launched 04:02:21.551903 run osmo-stp_10.42.42.5: Starting osmo-stp 04:02:22.086146 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6283): Launched 04:02:22.388887 run osmo-stp_10.42.42.5(pid=6284): Launched 04:02:22.497117 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:02:23.021161 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6286): Launched 04:02:23.128202 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:02:23.390513 run patchelf(pid=6287): Launched 04:02:23.565995 run osmo-stp_10.42.42.5(pid=6284): ERR: Terminated: ERROR {rc=1} [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6284)] 04:02:23.694512 run osmo-stp_10.42.42.5(pid=6284): stdout: | (launched: 2022-12-14_04:02:22.239116) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:02:23.823004 run osmo-stp_10.42.42.5(pid=6284): stderr: | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040222411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:02:23.946907 run osmo-stp_10.42.42.5(pid=6284): stdout: | (launched: 2022-12-14_04:02:22.239116) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:02:24.069369 run osmo-stp_10.42.42.5(pid=6284): stderr: | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214040222410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214040222411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214040222411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:02:24.212016 run patchelf(pid=6287): Terminating (SIGINT) 04:02:24.379155 run patchelf(pid=6287): Terminated: ok {rc=0} 04:02:24.409792 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=6284): Process ended prematurely: osmo-stp_10.42.42.5(pid=6284) [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6284)] [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 04:02:24.418949 tst switch_tch_pdch.py:54: Test FAILED (6.5 sec) 04:02:24.478652 run osmo-hlr_10.42.42.2(pid=6281): ERR: Terminated: ERROR {rc=237} [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6281)] 04:02:24.527553 run osmo-hlr_10.42.42.2(pid=6281): stdout: | (launched: 2022-12-14_04:02:21.285087) 04:02:24.576728 run osmo-hlr_10.42.42.2(pid=6281): stderr: | �[0;m�[1;31m20221214040221463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214040221463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214040221463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214040221463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214040221463 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214040221464 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214040221475 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214040221486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214040221486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214040221486 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:02:24.619019 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6280): Terminating (SIGTERM) 04:02:24.658767 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6283): Terminating (SIGTERM) 04:02:24.698455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6286): Terminating (SIGTERM) 04:02:24.707303 --- ParallelTerminationStrategy: PID 6280 died... 04:02:24.760478 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6280): Terminated: ok {rc=0} 04:02:24.770042 --- ParallelTerminationStrategy: PID 6283 died... 04:02:24.822848 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6283): Terminated: ok {rc=0} 04:02:24.832281 --- ParallelTerminationStrategy: PID 6286 died... 04:02:24.884843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6286): Terminated: ok {rc=0} 04:02:24.972937 bus /gobi_0: Setting Powered False 04:02:26.075232 bus /gobi_0: Setting Powered False 04:02:27.188499 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6284): Process ended prematurely: osmo-stp_10.42.42.5(pid=6284) [trial-2399↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6284)]