Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=10098): Process ended prematurely: osmo-stp_10.42.42.5(pid=10098) [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10098)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 04:45:19.775379 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:19.787465 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 04:45:19.931908 tst ping_idle_ping.py: using LAC 38637 04:45:20.057934 tst ping_idle_ping.py: using RAC 132 04:45:20.185969 tst ping_idle_ping.py: using CellId 38637 04:45:20.312520 tst ping_idle_ping.py: using BVCI 38638 04:45:20.337476 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.348893 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.360121 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.371323 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.382899 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.394491 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.406450 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 04:45:20.418111 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 04:45:20.694230 tst ping_idle_ping.py:24: start network... 04:45:20.818451 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:45:21.303534 run create_hlr_db(pid=10092): Launched 04:45:21.476591 bus /gobi_6: Setting Powered False 04:45:22.497309 run create_hlr_db(pid=10092): Terminated: ok {rc=0} 04:45:22.897235 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10094): Launched 04:45:23.198592 run osmo-hlr_10.42.42.2(pid=10095): Launched 04:45:23.316142 run osmo-stp_10.42.42.5: Starting osmo-stp 04:45:23.846788 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10097): Launched 04:45:24.146673 run osmo-stp_10.42.42.5(pid=10098): Launched 04:45:24.255048 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:45:24.781221 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10100): Launched 04:45:24.887057 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:45:25.148418 run patchelf(pid=10101): Launched 04:45:25.323905 run osmo-stp_10.42.42.5(pid=10098): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10098)] 04:45:25.452235 run osmo-stp_10.42.42.5(pid=10098): stdout: | (launched: 2022-12-14_04:45:23.998655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:25.581151 run osmo-stp_10.42.42.5(pid=10098): stderr: | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044524168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:25.705460 run osmo-stp_10.42.42.5(pid=10098): stdout: | (launched: 2022-12-14_04:45:23.998655) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:45:25.828030 run osmo-stp_10.42.42.5(pid=10098): stderr: | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214044524167 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214044524168 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214044524168 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:45:25.970711 run patchelf(pid=10101): Terminating (SIGINT) 04:45:26.138872 run patchelf(pid=10101): Terminated: ok {rc=0} 04:45:26.169536 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10098): Process ended prematurely: osmo-stp_10.42.42.5(pid=10098) [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10098)] [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 04:45:26.178322 tst ping_idle_ping.py:27: Test FAILED (6.4 sec) 04:45:26.238592 run osmo-hlr_10.42.42.2(pid=10095): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10095)] 04:45:26.287644 run osmo-hlr_10.42.42.2(pid=10095): stdout: | (launched: 2022-12-14_04:45:23.048297) 04:45:26.337502 run osmo-hlr_10.42.42.2(pid=10095): stderr: | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214044523223 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214044523236 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214044523245 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214044523246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214044523246 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:45:26.380006 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10094): Terminating (SIGTERM) 04:45:26.419790 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10097): Terminating (SIGTERM) 04:45:26.459684 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10100): Terminating (SIGTERM) 04:45:26.469114 --- ParallelTerminationStrategy: PID 10094 died... 04:45:26.522546 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10094): Terminated: ok {rc=0} 04:45:26.532268 --- ParallelTerminationStrategy: PID 10097 died... 04:45:26.585461 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10097): Terminated: ok {rc=0} 04:45:26.595108 --- ParallelTerminationStrategy: PID 10100 died... 04:45:26.648045 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10100): Terminated: ok {rc=0} 04:45:26.737294 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10098): Process ended prematurely: osmo-stp_10.42.42.5(pid=10098) [trial-2399↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10098)]