Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)]
Standard Output
---------------------------------------------- trial-2399 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 03:43:33.677923 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:33.690462 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:43:33.835139 tst ping_idle_ping.py: using LAC 38308 03:43:33.954607 tst ping_idle_ping.py: using RAC 58 03:43:34.071877 tst ping_idle_ping.py: using CellId 38308 03:43:34.199269 tst ping_idle_ping.py: using BVCI 38309 03:43:34.224098 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.235621 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.247034 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.258280 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.269686 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.281964 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.293552 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:43:34.304908 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:43:34.580118 tst ping_idle_ping.py:24: start network... 03:43:34.704793 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:43:35.191496 run create_hlr_db(pid=4701): Launched 03:43:35.365604 bus /gobi_6: Setting Powered False 03:43:36.386229 run create_hlr_db(pid=4701): Terminated: ok {rc=0} 03:43:36.819286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Launched 03:43:37.146745 run osmo-hlr_10.42.42.2(pid=4704): Launched 03:43:37.266489 run osmo-stp_10.42.42.5: Starting osmo-stp 03:43:37.834094 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Launched 03:43:38.159511 run osmo-stp_10.42.42.5(pid=4707): Launched 03:43:38.276525 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:43:38.843494 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Launched 03:43:38.959130 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:43:39.243752 run patchelf(pid=4710): Launched 03:43:39.434152 run osmo-stp_10.42.42.5(pid=4707): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)] 03:43:39.572858 run osmo-stp_10.42.42.5(pid=4707): stdout: | (launched: 2022-12-14_03:43:37.998149) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:39.712190 run osmo-stp_10.42.42.5(pid=4707): stderr: | �[0;m�[38;5;43m20221214034338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034338195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:39.846777 run osmo-stp_10.42.42.5(pid=4707): stdout: | (launched: 2022-12-14_03:43:37.998149) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:43:39.980562 run osmo-stp_10.42.42.5(pid=4707): stderr: | �[0;m�[38;5;43m20221214034338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214034338194 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214034338195 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214034338195 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214034338196 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:43:40.135233 run patchelf(pid=4710): Terminating (SIGINT) 03:43:40.316557 run patchelf(pid=4710): Terminated: ok {rc=0} 03:43:40.349809 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)] [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 03:43:40.359166 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 03:43:40.422748 run osmo-hlr_10.42.42.2(pid=4704): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4704)] 03:43:40.474391 run osmo-hlr_10.42.42.2(pid=4704): stdout: | (launched: 2022-12-14_03:43:36.983994) 03:43:40.526767 run osmo-hlr_10.42.42.2(pid=4704): stderr: | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214034337185 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214034337198 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214034337206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214034337206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214034337206 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:43:40.571379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Terminating (SIGTERM) 03:43:40.614029 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Terminating (SIGTERM) 03:43:40.656317 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Terminating (SIGTERM) 03:43:40.666095 --- ParallelTerminationStrategy: PID 4703 died... 03:43:40.722801 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4703): Terminated: ok {rc=0} 03:43:40.732857 --- ParallelTerminationStrategy: PID 4706 died... 03:43:40.789404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4706): Terminated: ok {rc=0} 03:43:40.799531 --- ParallelTerminationStrategy: PID 4709 died... 03:43:40.856124 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4709): Terminated: ok {rc=0} 03:43:40.944093 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4707): Process ended prematurely: osmo-stp_10.42.42.5(pid=4707) [trial-2399↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4707)]