Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=6079): Process ended prematurely: osmo-stp_10.42.42.5(pid=6079) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6079)]
Standard Output
---------------------------------------------- trial-2399 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 03:59:16.164428 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.182333 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 03:59:16.404820 tst cs_paging_gprs_active.py: using LAC 38392 03:59:16.535262 tst cs_paging_gprs_active.py: using RAC 142 03:59:16.659098 tst cs_paging_gprs_active.py: using CellId 38392 03:59:16.815656 tst cs_paging_gprs_active.py: using BVCI 38393 03:59:16.841739 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.853070 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.864815 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.876605 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.888374 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.900304 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.913133 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.924867 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 03:59:16.936573 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:59:17.066702 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 03:59:17.352404 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:59:17.488776 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:17.829613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6069): Launched 03:59:18.113940 run iperf3-srv_10.42.42.10(pid=6070): Launched 03:59:18.315023 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:59:18.451943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:59:18.794068 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6071): Launched 03:59:19.076712 run iperf3-srv_10.42.42.10(pid=6072): Launched 03:59:19.277247 tst cs_paging_gprs_active.py:38: start network... 03:59:19.413823 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:59:19.930583 run create_hlr_db(pid=6073): Launched 03:59:20.119825 bus /gobi_6: Setting Powered False 03:59:21.142038 run create_hlr_db(pid=6073): Terminated: ok {rc=0} 03:59:21.578066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6075): Launched 03:59:21.909370 run osmo-hlr_10.42.42.2(pid=6076): Launched 03:59:22.030330 run osmo-stp_10.42.42.5: Starting osmo-stp 03:59:22.603616 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6078): Launched 03:59:22.933304 run osmo-stp_10.42.42.5(pid=6079): Launched 03:59:23.052930 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:59:23.627633 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6081): Launched 03:59:23.746050 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:59:24.035308 run patchelf(pid=6082): Launched 03:59:24.227680 run osmo-stp_10.42.42.5(pid=6079): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6079)] 03:59:24.368403 run osmo-stp_10.42.42.5(pid=6079): stdout: | (launched: 2022-12-14_03:59:22.770887) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:24.509548 run osmo-stp_10.42.42.5(pid=6079): stderr: | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035922963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:24.646063 run osmo-stp_10.42.42.5(pid=6079): stdout: | (launched: 2022-12-14_03:59:22.770887) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:59:24.781333 run osmo-stp_10.42.42.5(pid=6079): stderr: | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214035922963 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214035922963 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214035922964 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:59:24.938982 run patchelf(pid=6082): Terminating (SIGINT) 03:59:25.122954 run patchelf(pid=6082): Terminated: ok {rc=0} 03:59:25.156460 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=6079): Process ended prematurely: osmo-stp_10.42.42.5(pid=6079) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6079)] [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 03:59:25.166517 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 03:59:25.231066 run osmo-hlr_10.42.42.2(pid=6076): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=6076)] 03:59:25.283522 run osmo-hlr_10.42.42.2(pid=6076): stdout: | (launched: 2022-12-14_03:59:21.745659) 03:59:25.336341 run osmo-hlr_10.42.42.2(pid=6076): stderr: | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214035921945 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214035921957 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214035921965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214035921965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214035921965 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:59:25.381773 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6069): Terminating (SIGTERM) 03:59:25.425085 run iperf3-srv_10.42.42.10(pid=6070): Terminating (SIGTERM) 03:59:25.468259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6071): Terminating (SIGTERM) 03:59:25.511554 run iperf3-srv_10.42.42.10(pid=6072): Terminating (SIGTERM) 03:59:25.554725 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6075): Terminating (SIGTERM) 03:59:25.597012 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6078): Terminating (SIGTERM) 03:59:25.639791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6081): Terminating (SIGTERM) 03:59:25.649542 --- ParallelTerminationStrategy: PID 6069 died... 03:59:25.706565 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6069): Terminated: ok {rc=0} 03:59:25.716783 --- ParallelTerminationStrategy: PID 6070 died... 03:59:25.773164 run iperf3-srv_10.42.42.10(pid=6070): Terminated {rc=256} 03:59:25.783242 --- ParallelTerminationStrategy: PID 6071 died... 03:59:25.840046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=6071): Terminated: ok {rc=0} 03:59:25.850262 --- ParallelTerminationStrategy: PID 6072 died... 03:59:25.906365 run iperf3-srv_10.42.42.10(pid=6072): Terminated {rc=256} 03:59:25.916422 --- ParallelTerminationStrategy: PID 6075 died... 03:59:25.972792 run pcap-recorder_any(filters='host 10.42.42.2')(pid=6075): Terminated: ok {rc=0} 03:59:25.982874 --- ParallelTerminationStrategy: PID 6078 died... 03:59:26.039222 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=6078): Terminated: ok {rc=0} 03:59:26.049407 --- ParallelTerminationStrategy: PID 6081 died... 03:59:26.105988 run pcap-recorder_any(filters='host 10.42.42.6')(pid=6081): Terminated: ok {rc=0} 03:59:26.193959 bus /gobi_0: Setting Powered False 03:59:27.300926 bus /gobi_0: Setting Powered False 03:59:28.412847 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=6079): Process ended prematurely: osmo-stp_10.42.42.5(pid=6079) [trial-2399↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=6079)]