Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=9658): Process ended prematurely: osmo-stp_10.42.42.5(pid=9658) [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9658)]
Standard Output
---------------------------------------------- trial-2399 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 04:39:08.081468 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.094576 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 04:39:08.230816 tst ping_idle_ping.py: using LAC 38604 04:39:08.357760 tst ping_idle_ping.py: using RAC 99 04:39:08.484408 tst ping_idle_ping.py: using CellId 38604 04:39:08.610222 tst ping_idle_ping.py: using BVCI 38605 04:39:08.635499 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.647885 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.660085 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.672632 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.685701 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.698747 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.712058 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 04:39:08.726034 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 04:39:09.025121 tst ping_idle_ping.py:24: start network... 04:39:09.161150 run osmo-hlr_10.42.42.2: Starting osmo-hlr 04:39:09.703060 run create_hlr_db(pid=9652): Launched 04:39:09.899042 bus /gobi_6: Setting Powered False 04:39:10.917631 run create_hlr_db(pid=9652): Terminated: ok {rc=0} 04:39:11.365004 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9654): Launched 04:39:11.797475 run osmo-hlr_10.42.42.2(pid=9655): Launched 04:39:12.023173 run osmo-stp_10.42.42.5: Starting osmo-stp 04:39:12.621387 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9657): Launched 04:39:13.052361 run osmo-stp_10.42.42.5(pid=9658): Launched 04:39:13.265576 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 04:39:13.850772 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9660): Launched 04:39:13.968817 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 04:39:14.268819 run patchelf(pid=9661): Launched 04:39:14.464524 run osmo-stp_10.42.42.5(pid=9658): ERR: Terminated: ERROR {rc=1} [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9658)] 04:39:14.606548 run osmo-stp_10.42.42.5(pid=9658): stdout: | (launched: 2022-12-14_04:39:12.789693) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:39:14.749415 run osmo-stp_10.42.42.5(pid=9658): stderr: | �[0;m�[38;5;43m20221214043913077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043913078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043913078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043913078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:39:14.887530 run osmo-stp_10.42.42.5(pid=9658): stdout: | (launched: 2022-12-14_04:39:12.789693) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 04:39:15.026812 run osmo-stp_10.42.42.5(pid=9658): stderr: | �[0;m�[38;5;43m20221214043913077 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214043913078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214043913078 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214043913078 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214043913079 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 04:39:15.184279 run patchelf(pid=9661): Terminating (SIGINT) 04:39:15.371815 run patchelf(pid=9661): Terminated: ok {rc=0} 04:39:15.405755 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9658): Process ended prematurely: osmo-stp_10.42.42.5(pid=9658) [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9658)] [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 04:39:15.417465 tst ping_idle_ping.py:27: Test FAILED (7.3 sec) 04:39:15.484357 run osmo-hlr_10.42.42.2(pid=9655): ERR: Terminated: ERROR {rc=237} [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9655)] 04:39:15.539085 run osmo-hlr_10.42.42.2(pid=9655): stdout: | (launched: 2022-12-14_04:39:11.531736) 04:39:15.594829 run osmo-hlr_10.42.42.2(pid=9655): stderr: | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214043911840 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214043911876 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2399/run.2022-12-14_03-34-50/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214043911884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214043911889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214043911889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 04:39:15.644710 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9654): Terminating (SIGTERM) 04:39:15.693133 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9657): Terminating (SIGTERM) 04:39:15.739958 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9660): Terminating (SIGTERM) 04:39:15.751065 --- ParallelTerminationStrategy: PID 9654 died... 04:39:15.814144 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9654): Terminated: ok {rc=0} 04:39:15.826803 --- ParallelTerminationStrategy: PID 9657 died... 04:39:15.902767 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9657): Terminated: ok {rc=0} 04:39:15.919484 --- ParallelTerminationStrategy: PID 9660 died... 04:39:15.995626 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9660): Terminated: ok {rc=0} 04:39:16.124710 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9658): Process ended prematurely: osmo-stp_10.42.42.5(pid=9658) [trial-2399↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9658)]