Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=18992): Process ended prematurely: osmo-stp_10.42.42.5(pid=18992) [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18992)]
Standard Output
---------------------------------------------- trial-2400 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 06:42:20.974595 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:20.986849 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 06:42:21.132630 tst iperf3.py: using LAC 39110 06:42:21.265097 tst iperf3.py: using RAC 95 06:42:21.397279 tst iperf3.py: using CellId 39110 06:42:21.523666 tst iperf3.py: using BVCI 39111 06:42:21.547368 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.558876 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.570033 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.581669 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.593274 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.604656 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.616267 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.627649 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 06:42:21.639378 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 06:42:21.941644 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 06:42:22.081058 run iperf3-srv_10.42.42.10: Starting iperf3-srv 06:42:22.423953 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18984): Launched 06:42:22.709172 run iperf3-srv_10.42.42.10(pid=18985): Launched 06:42:22.912334 tst iperf3.py:8: start network... 06:42:23.051767 run osmo-hlr_10.42.42.2: Starting osmo-hlr 06:42:23.581140 run create_hlr_db(pid=18986): Launched 06:42:23.773343 bus /gobi_6: Setting Powered False 06:42:24.792819 run create_hlr_db(pid=18986): Terminated: ok {rc=0} 06:42:25.210817 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18988): Launched 06:42:25.523495 run osmo-hlr_10.42.42.2(pid=18989): Launched 06:42:25.645813 run osmo-stp_10.42.42.5: Starting osmo-stp 06:42:26.196322 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18991): Launched 06:42:26.507971 run osmo-stp_10.42.42.5(pid=18992): Launched 06:42:26.622771 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 06:42:27.164567 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18994): Launched 06:42:27.276430 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 06:42:27.548559 run patchelf(pid=18995): Launched 06:42:27.730666 run osmo-stp_10.42.42.5(pid=18992): ERR: Terminated: ERROR {rc=1} [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18992)] 06:42:27.864063 run osmo-stp_10.42.42.5(pid=18992): stdout: | (launched: 2022-12-14_06:42:26.354462) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:42:27.998446 run osmo-stp_10.42.42.5(pid=18992): stderr: | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064226527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:42:28.127414 run osmo-stp_10.42.42.5(pid=18992): stdout: | (launched: 2022-12-14_06:42:26.354462) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 06:42:28.255017 run osmo-stp_10.42.42.5(pid=18992): stderr: | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214064226526 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214064226527 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214064226527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 06:42:28.403600 run patchelf(pid=18995): Terminating (SIGINT) 06:42:28.578677 run patchelf(pid=18995): Terminated: ok {rc=0} 06:42:28.610833 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18992): Process ended prematurely: osmo-stp_10.42.42.5(pid=18992) [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18992)] [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 06:42:28.620317 tst iperf3.py:8: Test FAILED (7.7 sec) 06:42:28.680337 run osmo-hlr_10.42.42.2(pid=18989): ERR: Terminated: ERROR {rc=237} [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18989)] 06:42:28.729127 run osmo-hlr_10.42.42.2(pid=18989): stdout: | (launched: 2022-12-14_06:42:25.369908) 06:42:28.778833 run osmo-hlr_10.42.42.2(pid=18989): stderr: | �[0;m�[1;31m20221214064225547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214064225547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214064225547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214064225547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214064225547 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214064225548 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214064225560 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2400/run.2022-12-14_05-28-31/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214064225568 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214064225569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214064225569 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 06:42:28.821153 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18984): Terminating (SIGTERM) 06:42:28.860886 run iperf3-srv_10.42.42.10(pid=18985): Terminating (SIGTERM) 06:42:28.900786 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18988): Terminating (SIGTERM) 06:42:28.940395 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18991): Terminating (SIGTERM) 06:42:28.980059 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18994): Terminating (SIGTERM) 06:42:28.989226 --- ParallelTerminationStrategy: PID 18984 died... 06:42:29.042354 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18984): Terminated: ok {rc=0} 06:42:29.051724 --- ParallelTerminationStrategy: PID 18985 died... 06:42:29.104662 run iperf3-srv_10.42.42.10(pid=18985): Terminated {rc=256} 06:42:29.114037 --- ParallelTerminationStrategy: PID 18988 died... 06:42:29.167050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18988): Terminated: ok {rc=0} 06:42:29.176489 --- ParallelTerminationStrategy: PID 18991 died... 06:42:29.229748 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18991): Terminated: ok {rc=0} 06:42:29.239130 --- ParallelTerminationStrategy: PID 18994 died... 06:42:29.292186 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18994): Terminated: ok {rc=0} 06:42:29.379868 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18992): Process ended prematurely: osmo-stp_10.42.42.5(pid=18992) [trial-2400↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18992)]