Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=26095): Process ended prematurely: osmo-stp_10.42.42.5(pid=26095) [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26095)]
Standard Output
---------------------------------------------- trial-2401 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 08:01:00.961951 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:00.973156 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 08:01:01.130485 tst cs_paging_gprs_active.py: using LAC 39522 08:01:01.251505 tst cs_paging_gprs_active.py: using RAC 252 08:01:01.374112 tst cs_paging_gprs_active.py: using CellId 39522 08:01:01.499248 tst cs_paging_gprs_active.py: using BVCI 39523 08:01:01.524086 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.535523 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.546875 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.558202 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.570064 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.581539 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.593352 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.605430 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 08:01:01.617410 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 08:01:01.738121 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 08:01:02.040107 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:01:02.172293 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:01:02.497804 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26085): Launched 08:01:02.767030 run iperf3-srv_10.42.42.10(pid=26086): Launched 08:01:02.956245 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:01:03.084829 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:01:03.408594 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26087): Launched 08:01:03.676667 run iperf3-srv_10.42.42.10(pid=26088): Launched 08:01:03.867015 tst cs_paging_gprs_active.py:38: start network... 08:01:03.996499 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:01:04.497809 run create_hlr_db(pid=26089): Launched 08:01:04.689739 bus /sierra_2: Setting Powered False 08:01:05.710289 run create_hlr_db(pid=26089): Terminated: ok {rc=0} 08:01:06.129122 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26091): Launched 08:01:06.442013 run osmo-hlr_10.42.42.2(pid=26092): Launched 08:01:06.555942 run osmo-stp_10.42.42.5: Starting osmo-stp 08:01:07.095997 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26094): Launched 08:01:07.408853 run osmo-stp_10.42.42.5(pid=26095): Launched 08:01:07.521958 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:01:08.062470 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26097): Launched 08:01:08.172433 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:01:08.446835 run patchelf(pid=26098): Launched 08:01:08.627741 run osmo-stp_10.42.42.5(pid=26095): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26095)] 08:01:08.759918 run osmo-stp_10.42.42.5(pid=26095): stdout: | (launched: 2022-12-14_08:01:07.252910) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:01:08.892518 run osmo-stp_10.42.42.5(pid=26095): stderr: | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080107425 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:01:09.019841 run osmo-stp_10.42.42.5(pid=26095): stdout: | (launched: 2022-12-14_08:01:07.252910) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:01:09.145908 run osmo-stp_10.42.42.5(pid=26095): stderr: | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214080107425 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214080107425 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214080107428 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:01:09.294423 run patchelf(pid=26098): Terminating (SIGINT) 08:01:09.469686 run patchelf(pid=26098): Terminated: ok {rc=0} 08:01:09.501685 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26095): Process ended prematurely: osmo-stp_10.42.42.5(pid=26095) [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26095)] [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 08:01:09.510952 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:01:09.571079 run osmo-hlr_10.42.42.2(pid=26092): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26092)] 08:01:09.619976 run osmo-hlr_10.42.42.2(pid=26092): stdout: | (launched: 2022-12-14_08:01:06.285985) 08:01:09.669549 run osmo-hlr_10.42.42.2(pid=26092): stderr: | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214080106462 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214080106474 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214080106482 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214080106483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214080106483 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:01:09.711867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26085): Terminating (SIGTERM) 08:01:09.751588 run iperf3-srv_10.42.42.10(pid=26086): Terminating (SIGTERM) 08:01:09.791373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26087): Terminating (SIGTERM) 08:01:09.831187 run iperf3-srv_10.42.42.10(pid=26088): Terminating (SIGTERM) 08:01:09.870983 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26091): Terminating (SIGTERM) 08:01:09.910736 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26094): Terminating (SIGTERM) 08:01:09.950436 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26097): Terminating (SIGTERM) 08:01:09.959718 --- ParallelTerminationStrategy: PID 26085 died... 08:01:10.012386 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26085): Terminated: ok {rc=0} 08:01:10.022022 --- ParallelTerminationStrategy: PID 26086 died... 08:01:10.074354 run iperf3-srv_10.42.42.10(pid=26086): Terminated {rc=256} 08:01:10.083840 --- ParallelTerminationStrategy: PID 26087 died... 08:01:10.136272 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26087): Terminated: ok {rc=0} 08:01:10.145811 --- ParallelTerminationStrategy: PID 26088 died... 08:01:10.198286 run iperf3-srv_10.42.42.10(pid=26088): Terminated {rc=256} 08:01:10.207700 --- ParallelTerminationStrategy: PID 26091 died... 08:01:10.260364 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26091): Terminated: ok {rc=0} 08:01:10.269943 --- ParallelTerminationStrategy: PID 26094 died... 08:01:10.322483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26094): Terminated: ok {rc=0} 08:01:10.332026 --- ParallelTerminationStrategy: PID 26097 died... 08:01:10.384738 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26097): Terminated: ok {rc=0} 08:01:10.473181 bus /gobi_0: Setting Powered False 08:01:11.577272 bus /gobi_0: Setting Powered False 08:01:12.682804 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26095): Process ended prematurely: osmo-stp_10.42.42.5(pid=26095) [trial-2401↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26095)]