Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=23804): Process ended prematurely: osmo-stp_10.42.42.5(pid=23804) [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23804)]
Standard Output
---------------------------------------------- trial-2401 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 07:39:54.510458 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:54.521850 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 07:39:54.687428 tst cs_paging_gprs_active.py: using LAC 39410 07:39:54.817422 tst cs_paging_gprs_active.py: using RAC 140 07:39:54.947299 tst cs_paging_gprs_active.py: using CellId 39410 07:39:55.077243 tst cs_paging_gprs_active.py: using BVCI 39411 07:39:55.102268 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.113728 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.125063 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.136329 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.147884 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.159520 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.171309 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.182885 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 07:39:55.194738 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:39:55.313466 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 07:39:55.618544 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 07:39:55.756452 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:39:56.097413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23794): Launched 07:39:56.383122 run iperf3-srv_10.42.42.10(pid=23795): Launched 07:39:56.585966 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 07:39:56.724744 run iperf3-srv_10.42.42.10: Starting iperf3-srv 07:39:57.067135 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23796): Launched 07:39:57.350076 run iperf3-srv_10.42.42.10(pid=23797): Launched 07:39:57.551189 tst cs_paging_gprs_active.py:38: start network... 07:39:57.688496 run osmo-hlr_10.42.42.2: Starting osmo-hlr 07:39:58.207176 run create_hlr_db(pid=23798): Launched 07:39:58.396477 bus /gobi_6: Setting Powered False 07:39:59.417767 run create_hlr_db(pid=23798): Terminated: ok {rc=0} 07:39:59.831690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23800): Launched 07:40:00.140223 run osmo-hlr_10.42.42.2(pid=23801): Launched 07:40:00.253766 run osmo-stp_10.42.42.5: Starting osmo-stp 07:40:00.787590 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23803): Launched 07:40:01.273648 run osmo-stp_10.42.42.5(pid=23804): Launched 07:40:01.414135 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 07:40:02.060278 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23809): Launched 07:40:02.182528 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 07:40:02.472429 run patchelf(pid=23810): Launched 07:40:02.651544 run osmo-stp_10.42.42.5(pid=23804): ERR: Terminated: ERROR {rc=1} [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23804)] 07:40:02.782611 run osmo-stp_10.42.42.5(pid=23804): stdout: | (launched: 2022-12-14_07:40:00.959412) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:40:02.912933 run osmo-stp_10.42.42.5(pid=23804): stderr: | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074001146 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:40:03.038788 run osmo-stp_10.42.42.5(pid=23804): stdout: | (launched: 2022-12-14_07:40:00.959412) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 07:40:03.163714 run osmo-stp_10.42.42.5(pid=23804): stderr: | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214074001145 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214074001146 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214074001146 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 07:40:03.310515 run patchelf(pid=23810): Terminating (SIGINT) 07:40:03.483328 run patchelf(pid=23810): Terminated: ok {rc=0} 07:40:03.515145 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=23804): Process ended prematurely: osmo-stp_10.42.42.5(pid=23804) [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23804)] [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 07:40:03.524399 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 07:40:03.584098 run osmo-hlr_10.42.42.2(pid=23801): ERR: Terminated: ERROR {rc=237} [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23801)] 07:40:03.632789 run osmo-hlr_10.42.42.2(pid=23801): stdout: | (launched: 2022-12-14_07:39:59.987168) 07:40:03.682302 run osmo-hlr_10.42.42.2(pid=23801): stderr: | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214074000164 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214074000176 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2401/run.2022-12-14_06-57-06/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214074000184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214074000184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214074000184 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 07:40:03.724513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23794): Terminating (SIGTERM) 07:40:03.764076 run iperf3-srv_10.42.42.10(pid=23795): Terminating (SIGTERM) 07:40:03.803791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23796): Terminating (SIGTERM) 07:40:03.843409 run iperf3-srv_10.42.42.10(pid=23797): Terminating (SIGTERM) 07:40:03.883077 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23800): Terminating (SIGTERM) 07:40:03.922550 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23803): Terminating (SIGTERM) 07:40:03.962253 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23809): Terminating (SIGTERM) 07:40:03.971348 --- ParallelTerminationStrategy: PID 23794 died... 07:40:04.024432 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23794): Terminated: ok {rc=0} 07:40:04.033898 --- ParallelTerminationStrategy: PID 23795 died... 07:40:04.086454 run iperf3-srv_10.42.42.10(pid=23795): Terminated {rc=256} 07:40:04.095835 --- ParallelTerminationStrategy: PID 23796 died... 07:40:04.148440 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23796): Terminated: ok {rc=0} 07:40:04.157877 --- ParallelTerminationStrategy: PID 23797 died... 07:40:04.210447 run iperf3-srv_10.42.42.10(pid=23797): Terminated {rc=256} 07:40:04.219826 --- ParallelTerminationStrategy: PID 23800 died... 07:40:04.272748 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23800): Terminated: ok {rc=0} 07:40:04.282198 --- ParallelTerminationStrategy: PID 23803 died... 07:40:04.334897 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23803): Terminated: ok {rc=0} 07:40:04.344350 --- ParallelTerminationStrategy: PID 23809 died... 07:40:04.396779 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23809): Terminated: ok {rc=0} 07:40:04.480595 bus /gobi_0: Setting Powered False 07:40:05.587455 bus /gobi_0: Setting Powered False 07:40:06.695999 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23804): Process ended prematurely: osmo-stp_10.42.42.5(pid=23804) [trial-2401↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23804)]