Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=29924): Process ended prematurely: osmo-stp_10.42.42.5(pid=29924) [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29924)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 08:47:44.091111 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.101676 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:47:44.235582 tst cs_paging_gprs_active.py: using LAC 39765 08:47:44.360565 tst cs_paging_gprs_active.py: using RAC 240 08:47:44.486348 tst cs_paging_gprs_active.py: using CellId 39765 08:47:44.611836 tst cs_paging_gprs_active.py: using BVCI 39766 08:47:44.636658 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.647882 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.658943 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.669892 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.681127 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.691992 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.703144 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.714131 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:47:44.725371 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:47:44.842201 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:47:45.139620 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:47:45.275933 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:45.611405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29914): Launched 08:47:45.926999 run iperf3-srv_10.42.42.10(pid=29915): Launched 08:47:46.118440 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:47:46.250234 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:47:46.590399 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Launched 08:47:46.880371 run iperf3-srv_10.42.42.10(pid=29917): Launched 08:47:47.072065 tst cs_paging_gprs_active.py:38: start network... 08:47:47.202177 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:47:47.686074 run create_hlr_db(pid=29918): Launched 08:47:47.860652 bus /sierra_2: Setting Powered False 08:47:48.882674 run create_hlr_db(pid=29918): Terminated: ok {rc=0} 08:47:49.287369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29920): Launched 08:47:49.592731 run osmo-hlr_10.42.42.2(pid=29921): Launched 08:47:49.709563 run osmo-stp_10.42.42.5: Starting osmo-stp 08:47:50.246995 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29923): Launched 08:47:50.551712 run osmo-stp_10.42.42.5(pid=29924): Launched 08:47:50.662701 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:47:51.194454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29926): Launched 08:47:51.302839 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:47:51.568637 run patchelf(pid=29927): Launched 08:47:51.747162 run osmo-stp_10.42.42.5(pid=29924): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29924)] 08:47:51.877665 run osmo-stp_10.42.42.5(pid=29924): stdout: | (launched: 2022-12-14_08:47:50.401522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:52.008189 run osmo-stp_10.42.42.5(pid=29924): stderr: | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084750571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:52.134310 run osmo-stp_10.42.42.5(pid=29924): stdout: | (launched: 2022-12-14_08:47:50.401522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:47:52.259483 run osmo-stp_10.42.42.5(pid=29924): stderr: | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214084750570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214084750571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214084750571 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:47:52.404278 run patchelf(pid=29927): Terminating (SIGINT) 08:47:52.574367 run patchelf(pid=29927): Terminated: ok {rc=0} 08:47:52.605776 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29924): Process ended prematurely: osmo-stp_10.42.42.5(pid=29924) [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29924)] [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 08:47:52.615223 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:47:52.675514 run osmo-hlr_10.42.42.2(pid=29921): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29921)] 08:47:52.724720 run osmo-hlr_10.42.42.2(pid=29921): stdout: | (launched: 2022-12-14_08:47:49.441965) 08:47:52.774848 run osmo-hlr_10.42.42.2(pid=29921): stderr: | �[0;m�[1;31m20221214084749617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214084749617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214084749617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214084749617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214084749617 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214084749618 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214084749640 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214084749649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214084749649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214084749649 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:47:52.817248 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29914): Terminating (SIGTERM) 08:47:52.857200 run iperf3-srv_10.42.42.10(pid=29915): Terminating (SIGTERM) 08:47:52.897626 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Terminating (SIGTERM) 08:47:52.937306 run iperf3-srv_10.42.42.10(pid=29917): Terminating (SIGTERM) 08:47:52.977151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29920): Terminating (SIGTERM) 08:47:53.016834 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29923): Terminating (SIGTERM) 08:47:53.057497 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29926): Terminating (SIGTERM) 08:47:53.066699 --- ParallelTerminationStrategy: PID 29914 died... 08:47:53.121170 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29914): Terminated: ok {rc=0} 08:47:53.130772 --- ParallelTerminationStrategy: PID 29915 died... 08:47:53.184354 run iperf3-srv_10.42.42.10(pid=29915): Terminated {rc=256} 08:47:53.193841 --- ParallelTerminationStrategy: PID 29916 died... 08:47:53.246937 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29916): Terminated: ok {rc=0} 08:47:53.256336 --- ParallelTerminationStrategy: PID 29917 died... 08:47:53.309645 run iperf3-srv_10.42.42.10(pid=29917): Terminated {rc=256} 08:47:53.319087 --- ParallelTerminationStrategy: PID 29920 died... 08:47:53.372415 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29920): Terminated: ok {rc=0} 08:47:53.381892 --- ParallelTerminationStrategy: PID 29923 died... 08:47:53.435151 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29923): Terminated: ok {rc=0} 08:47:53.444630 --- ParallelTerminationStrategy: PID 29926 died... 08:47:53.498142 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29926): Terminated: ok {rc=0} 08:47:53.582405 bus /gobi_0: Setting Powered False 08:47:54.691007 bus /gobi_0: Setting Powered False 08:47:55.804376 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29924): Process ended prematurely: osmo-stp_10.42.42.5(pid=29924) [trial-2402↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29924)]