Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=31152): Process ended prematurely: osmo-stp_10.42.42.5(pid=31152) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31152)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 09:00:29.198303 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.210692 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 09:00:29.382113 tst ping_idle_ping.py: using LAC 39831 09:00:29.506479 tst ping_idle_ping.py: using RAC 51 09:00:29.630517 tst ping_idle_ping.py: using CellId 39831 09:00:29.760442 tst ping_idle_ping.py: using BVCI 39832 09:00:29.785074 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.796899 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.808432 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.819891 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.831540 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.842981 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.854541 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 09:00:29.866006 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 09:00:30.156885 tst ping_idle_ping.py:24: start network... 09:00:30.289813 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:00:30.804885 run create_hlr_db(pid=31146): Launched 09:00:31.004056 bus /gobi_6: Setting Powered False 09:00:32.021863 run create_hlr_db(pid=31146): Terminated: ok {rc=0} 09:00:32.494688 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31148): Launched 09:00:32.815080 run osmo-hlr_10.42.42.2(pid=31149): Launched 09:00:32.930444 run osmo-stp_10.42.42.5: Starting osmo-stp 09:00:33.490179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31151): Launched 09:00:33.811352 run osmo-stp_10.42.42.5(pid=31152): Launched 09:00:33.926524 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:00:34.488791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31154): Launched 09:00:34.603127 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:00:34.885431 run patchelf(pid=31155): Launched 09:00:35.073795 run osmo-stp_10.42.42.5(pid=31152): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31152)] 09:00:35.211802 run osmo-stp_10.42.42.5(pid=31152): stdout: | (launched: 2022-12-14_09:00:33.653028) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:00:35.349700 run osmo-stp_10.42.42.5(pid=31152): stderr: | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090033847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:00:35.482707 run osmo-stp_10.42.42.5(pid=31152): stdout: | (launched: 2022-12-14_09:00:33.653028) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:00:35.614544 run osmo-stp_10.42.42.5(pid=31152): stderr: | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214090033846 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214090033847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214090033847 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:00:35.767357 run patchelf(pid=31155): Terminating (SIGINT) 09:00:35.946217 run patchelf(pid=31155): Terminated: ok {rc=0} 09:00:35.978809 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=31152): Process ended prematurely: osmo-stp_10.42.42.5(pid=31152) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31152)] [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 09:00:35.988139 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 09:00:36.050595 run osmo-hlr_10.42.42.2(pid=31149): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31149)] 09:00:36.102308 run osmo-hlr_10.42.42.2(pid=31149): stdout: | (launched: 2022-12-14_09:00:32.657656) 09:00:36.154445 run osmo-hlr_10.42.42.2(pid=31149): stderr: | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214090032856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214090032905 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214090032914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214090032914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214090032914 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:00:36.198768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31148): Terminating (SIGTERM) 09:00:36.240620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31151): Terminating (SIGTERM) 09:00:36.282500 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31154): Terminating (SIGTERM) 09:00:36.292166 --- ParallelTerminationStrategy: PID 31148 died... 09:00:36.348031 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31148): Terminated: ok {rc=0} 09:00:36.358179 --- ParallelTerminationStrategy: PID 31151 died... 09:00:36.413824 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31151): Terminated: ok {rc=0} 09:00:36.423940 --- ParallelTerminationStrategy: PID 31154 died... 09:00:36.479701 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31154): Terminated: ok {rc=0} 09:00:36.566629 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31152): Process ended prematurely: osmo-stp_10.42.42.5(pid=31152) [trial-2402↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31152)]