Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=28643): Process ended prematurely: osmo-stp_10.42.42.5(pid=28643) [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28643)]
Standard Output
---------------------------------------------- trial-2402 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 08:33:13.357716 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.368452 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 08:33:13.515424 tst cs_paging_gprs_active.py: using LAC 39687 08:33:13.640813 tst cs_paging_gprs_active.py: using RAC 162 08:33:13.762174 tst cs_paging_gprs_active.py: using CellId 39687 08:33:13.881810 tst cs_paging_gprs_active.py: using BVCI 39688 08:33:13.905480 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.916359 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.927139 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.937919 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.948656 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.959718 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.970763 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.981661 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 08:33:13.992672 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:33:14.112057 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 08:33:14.411849 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:33:14.551237 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:33:14.893818 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28633): Launched 08:33:15.180625 run iperf3-srv_10.42.42.10(pid=28634): Launched 08:33:15.383690 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:33:15.521616 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:33:15.890176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28635): Launched 08:33:16.182526 run iperf3-srv_10.42.42.10(pid=28636): Launched 08:33:16.377516 tst cs_paging_gprs_active.py:38: start network... 08:33:16.511034 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:33:17.045636 run create_hlr_db(pid=28637): Launched 08:33:17.236258 bus /gobi_6: Setting Powered False 08:33:18.247974 run create_hlr_db(pid=28637): Terminated: ok {rc=0} 08:33:18.693311 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28639): Launched 08:33:19.027820 run osmo-hlr_10.42.42.2(pid=28640): Launched 08:33:19.153601 run osmo-stp_10.42.42.5: Starting osmo-stp 08:33:19.731523 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28642): Launched 08:33:20.064106 run osmo-stp_10.42.42.5(pid=28643): Launched 08:33:20.185387 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:33:20.766362 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28645): Launched 08:33:20.884854 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:33:21.176305 run patchelf(pid=28646): Launched 08:33:21.369243 run osmo-stp_10.42.42.5(pid=28643): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28643)] 08:33:21.510073 run osmo-stp_10.42.42.5(pid=28643): stdout: | (launched: 2022-12-14_08:33:19.899399) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:33:21.651619 run osmo-stp_10.42.42.5(pid=28643): stderr: | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083320097 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:33:21.788370 run osmo-stp_10.42.42.5(pid=28643): stdout: | (launched: 2022-12-14_08:33:19.899399) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:33:21.924037 run osmo-stp_10.42.42.5(pid=28643): stderr: | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083320096 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083320097 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083320097 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:33:22.081856 run patchelf(pid=28646): Terminating (SIGINT) 08:33:22.267230 run patchelf(pid=28646): Terminated: ok {rc=0} 08:33:22.301274 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28643): Process ended prematurely: osmo-stp_10.42.42.5(pid=28643) [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28643)] [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 08:33:22.311336 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 08:33:22.374183 run osmo-hlr_10.42.42.2(pid=28640): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28640)] 08:33:22.425514 run osmo-hlr_10.42.42.2(pid=28640): stdout: | (launched: 2022-12-14_08:33:18.862454) 08:33:22.477397 run osmo-hlr_10.42.42.2(pid=28640): stderr: | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214083319065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214083319084 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214083319093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214083319093 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214083319094 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:33:22.521746 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28633): Terminating (SIGTERM) 08:33:22.563214 run iperf3-srv_10.42.42.10(pid=28634): Terminating (SIGTERM) 08:33:22.604674 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28635): Terminating (SIGTERM) 08:33:22.646276 run iperf3-srv_10.42.42.10(pid=28636): Terminating (SIGTERM) 08:33:22.688503 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28639): Terminating (SIGTERM) 08:33:22.730359 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28642): Terminating (SIGTERM) 08:33:22.772259 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28645): Terminating (SIGTERM) 08:33:22.781891 --- ParallelTerminationStrategy: PID 28633 died... 08:33:22.837433 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28633): Terminated: ok {rc=0} 08:33:22.847361 --- ParallelTerminationStrategy: PID 28634 died... 08:33:22.902243 run iperf3-srv_10.42.42.10(pid=28634): Terminated {rc=256} 08:33:22.912123 --- ParallelTerminationStrategy: PID 28635 died... 08:33:22.967262 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28635): Terminated: ok {rc=0} 08:33:22.977258 --- ParallelTerminationStrategy: PID 28636 died... 08:33:23.031999 run iperf3-srv_10.42.42.10(pid=28636): Terminated {rc=256} 08:33:23.042010 --- ParallelTerminationStrategy: PID 28639 died... 08:33:23.097078 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28639): Terminated: ok {rc=0} 08:33:23.107058 --- ParallelTerminationStrategy: PID 28642 died... 08:33:23.162186 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28642): Terminated: ok {rc=0} 08:33:23.172152 --- ParallelTerminationStrategy: PID 28645 died... 08:33:23.227553 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28645): Terminated: ok {rc=0} 08:33:23.314240 bus /gobi_0: Setting Powered False 08:33:24.420102 bus /gobi_0: Setting Powered False 08:33:25.528860 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28643): Process ended prematurely: osmo-stp_10.42.42.5(pid=28643) [trial-2402↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28643)]