Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=28712): Process ended prematurely: osmo-stp_10.42.42.5(pid=28712) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28712)]
Standard Output
---------------------------------------------- trial-2402 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:34:14.345019 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.356036 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:34:14.503500 tst cs_paging_gprs_active.py: using LAC 39692 08:34:14.627263 tst cs_paging_gprs_active.py: using RAC 167 08:34:14.749689 tst cs_paging_gprs_active.py: using CellId 39692 08:34:14.871988 tst cs_paging_gprs_active.py: using BVCI 39693 08:34:14.895695 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.906768 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.917550 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.928247 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.939407 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.950544 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.961663 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.972554 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:34:14.983755 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:34:15.108147 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:34:15.391576 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:34:15.520494 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:34:15.843799 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28702): Launched 08:34:16.124845 run iperf3-srv_10.42.42.10(pid=28703): Launched 08:34:16.318022 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:34:16.450640 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:34:16.791870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28704): Launched 08:34:17.087279 run iperf3-srv_10.42.42.10(pid=28705): Launched 08:34:17.298218 tst cs_paging_gprs_active.py:38: start network... 08:34:17.437203 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:34:17.970691 run create_hlr_db(pid=28706): Launched 08:34:18.161651 bus /gobi_6: Setting Powered False 08:34:19.182390 run create_hlr_db(pid=28706): Terminated: ok {rc=0} 08:34:19.623363 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28708): Launched 08:34:19.955771 run osmo-hlr_10.42.42.2(pid=28709): Launched 08:34:20.080431 run osmo-stp_10.42.42.5: Starting osmo-stp 08:34:20.658939 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28711): Launched 08:34:20.993492 run osmo-stp_10.42.42.5(pid=28712): Launched 08:34:21.113715 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:34:21.692840 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28714): Launched 08:34:21.811188 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:34:22.101094 run patchelf(pid=28715): Launched 08:34:22.294974 run osmo-stp_10.42.42.5(pid=28712): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28712)] 08:34:22.435781 run osmo-stp_10.42.42.5(pid=28712): stdout: | (launched: 2022-12-14_08:34:20.827447) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:34:22.576466 run osmo-stp_10.42.42.5(pid=28712): stderr: | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083421025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:34:22.713966 run osmo-stp_10.42.42.5(pid=28712): stdout: | (launched: 2022-12-14_08:34:20.827447) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:34:22.849731 run osmo-stp_10.42.42.5(pid=28712): stderr: | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083421024 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083421025 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083421025 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:34:23.007209 run patchelf(pid=28715): Terminating (SIGINT) 08:34:23.191905 run patchelf(pid=28715): Terminated: ok {rc=0} 08:34:23.225850 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28712): Process ended prematurely: osmo-stp_10.42.42.5(pid=28712) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28712)] [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:34:23.235893 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 08:34:23.298901 run osmo-hlr_10.42.42.2(pid=28709): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28709)] 08:34:23.350486 run osmo-hlr_10.42.42.2(pid=28709): stdout: | (launched: 2022-12-14_08:34:19.791861) 08:34:23.402465 run osmo-hlr_10.42.42.2(pid=28709): stderr: | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214083419995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214083420009 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214083420017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214083420017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214083420017 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:34:23.447212 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28702): Terminating (SIGTERM) 08:34:23.489523 run iperf3-srv_10.42.42.10(pid=28703): Terminating (SIGTERM) 08:34:23.531331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28704): Terminating (SIGTERM) 08:34:23.572643 run iperf3-srv_10.42.42.10(pid=28705): Terminating (SIGTERM) 08:34:23.614480 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28708): Terminating (SIGTERM) 08:34:23.656084 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28711): Terminating (SIGTERM) 08:34:23.697803 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28714): Terminating (SIGTERM) 08:34:23.707516 --- ParallelTerminationStrategy: PID 28702 died... 08:34:23.763465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28702): Terminated: ok {rc=0} 08:34:23.773939 --- ParallelTerminationStrategy: PID 28703 died... 08:34:23.829263 run iperf3-srv_10.42.42.10(pid=28703): Terminated {rc=256} 08:34:23.839337 --- ParallelTerminationStrategy: PID 28704 died... 08:34:23.894982 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28704): Terminated: ok {rc=0} 08:34:23.905129 --- ParallelTerminationStrategy: PID 28705 died... 08:34:23.960995 run iperf3-srv_10.42.42.10(pid=28705): Terminated {rc=256} 08:34:23.971119 --- ParallelTerminationStrategy: PID 28708 died... 08:34:24.026797 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28708): Terminated: ok {rc=0} 08:34:24.036890 --- ParallelTerminationStrategy: PID 28711 died... 08:34:24.092410 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28711): Terminated: ok {rc=0} 08:34:24.102539 --- ParallelTerminationStrategy: PID 28714 died... 08:34:24.157878 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28714): Terminated: ok {rc=0} 08:34:24.245313 bus /gobi_0: Setting Powered False 08:34:25.348920 bus /gobi_0: Setting Powered False 08:34:26.457743 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28712): Process ended prematurely: osmo-stp_10.42.42.5(pid=28712) [trial-2402↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28712)]