Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=28572): Process ended prematurely: osmo-stp_10.42.42.5(pid=28572) [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28572)]
Standard Output
---------------------------------------------- trial-2402 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:32:12.418843 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:12.429894 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:32:12.554755 tst cs_paging_gprs_active.py: using LAC 39682 08:32:12.684674 tst cs_paging_gprs_active.py: using RAC 157 08:32:12.813554 tst cs_paging_gprs_active.py: using CellId 39682 08:32:12.942075 tst cs_paging_gprs_active.py: using BVCI 39683 08:32:12.967819 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:12.979495 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:12.990895 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.002421 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.013723 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.025007 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.036484 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.047872 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:32:13.059448 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:32:13.176939 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:32:13.478044 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:32:13.617457 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:32:13.961997 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28562): Launched 08:32:14.250585 run iperf3-srv_10.42.42.10(pid=28563): Launched 08:32:14.453953 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:32:14.592485 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:32:14.937283 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28564): Launched 08:32:15.224855 run iperf3-srv_10.42.42.10(pid=28565): Launched 08:32:15.428879 tst cs_paging_gprs_active.py:38: start network... 08:32:15.567962 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:32:16.115673 run create_hlr_db(pid=28566): Launched 08:32:16.299681 bus /gobi_6: Setting Powered False 08:32:17.329454 run create_hlr_db(pid=28566): Terminated: ok {rc=0} 08:32:17.774954 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28568): Launched 08:32:18.110512 run osmo-hlr_10.42.42.2(pid=28569): Launched 08:32:18.235558 run osmo-stp_10.42.42.5: Starting osmo-stp 08:32:18.813458 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28571): Launched 08:32:19.147736 run osmo-stp_10.42.42.5(pid=28572): Launched 08:32:19.268080 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:32:19.848532 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28574): Launched 08:32:19.966901 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:32:20.258843 run patchelf(pid=28575): Launched 08:32:20.452094 run osmo-stp_10.42.42.5(pid=28572): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28572)] 08:32:20.593051 run osmo-stp_10.42.42.5(pid=28572): stdout: | (launched: 2022-12-14_08:32:18.982422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:32:20.734584 run osmo-stp_10.42.42.5(pid=28572): stderr: | �[0;m�[38;5;43m20221214083219177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083219178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083219178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083219178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:32:20.871687 run osmo-stp_10.42.42.5(pid=28572): stdout: | (launched: 2022-12-14_08:32:18.982422) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:32:21.008218 run osmo-stp_10.42.42.5(pid=28572): stderr: | �[0;m�[38;5;43m20221214083219177 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214083219178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214083219178 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214083219178 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214083219179 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:32:21.166620 run patchelf(pid=28575): Terminating (SIGINT) 08:32:21.351744 run patchelf(pid=28575): Terminated: ok {rc=0} 08:32:21.385731 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=28572): Process ended prematurely: osmo-stp_10.42.42.5(pid=28572) [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28572)] [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:32:21.395781 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 08:32:21.459643 run osmo-hlr_10.42.42.2(pid=28569): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28569)] 08:32:21.511551 run osmo-hlr_10.42.42.2(pid=28569): stdout: | (launched: 2022-12-14_08:32:17.943697) 08:32:21.564234 run osmo-hlr_10.42.42.2(pid=28569): stderr: | �[0;m�[1;31m20221214083218147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214083218147 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214083218148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214083218148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214083218148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214083218148 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214083218161 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214083218169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214083218169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214083218169 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:32:21.609355 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28562): Terminating (SIGTERM) 08:32:21.651883 run iperf3-srv_10.42.42.10(pid=28563): Terminating (SIGTERM) 08:32:21.694727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28564): Terminating (SIGTERM) 08:32:21.736850 run iperf3-srv_10.42.42.10(pid=28565): Terminating (SIGTERM) 08:32:21.779574 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28568): Terminating (SIGTERM) 08:32:21.822150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28571): Terminating (SIGTERM) 08:32:21.864365 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28574): Terminating (SIGTERM) 08:32:21.874210 --- ParallelTerminationStrategy: PID 28562 died... 08:32:21.930718 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28562): Terminated: ok {rc=0} 08:32:21.940889 --- ParallelTerminationStrategy: PID 28563 died... 08:32:21.996840 run iperf3-srv_10.42.42.10(pid=28563): Terminated {rc=256} 08:32:22.006978 --- ParallelTerminationStrategy: PID 28564 died... 08:32:22.063070 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28564): Terminated: ok {rc=0} 08:32:22.073189 --- ParallelTerminationStrategy: PID 28565 died... 08:32:22.129184 run iperf3-srv_10.42.42.10(pid=28565): Terminated {rc=256} 08:32:22.139304 --- ParallelTerminationStrategy: PID 28568 died... 08:32:22.195367 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28568): Terminated: ok {rc=0} 08:32:22.205621 --- ParallelTerminationStrategy: PID 28571 died... 08:32:22.262054 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28571): Terminated: ok {rc=0} 08:32:22.272112 --- ParallelTerminationStrategy: PID 28574 died... 08:32:22.328479 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28574): Terminated: ok {rc=0} 08:32:22.415283 bus /gobi_0: Setting Powered False 08:32:23.522010 bus /gobi_0: Setting Powered False 08:32:24.635437 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28572): Process ended prematurely: osmo-stp_10.42.42.5(pid=28572) [trial-2402↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28572)]