Failed
gprs:trx-b200+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=30137): Process ended prematurely: osmo-stp_10.42.42.5(pid=30137) [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30137)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-b200+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:50:43.832422 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:43.843595 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:50:44.000807 tst cs_paging_gprs_active.py: using LAC 39780 08:50:44.120063 tst cs_paging_gprs_active.py: using RAC 255 08:50:44.241604 tst cs_paging_gprs_active.py: using CellId 39780 08:50:44.360616 tst cs_paging_gprs_active.py: using BVCI 39781 08:50:44.383911 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.395012 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.405775 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.416353 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.427266 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.438391 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.449888 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.460825 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:50:44.472050 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:50:44.592737 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:50:44.876093 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:50:45.003995 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:50:45.320054 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30127): Launched 08:50:45.584046 run iperf3-srv_10.42.42.10(pid=30128): Launched 08:50:45.769969 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:50:45.924314 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:50:46.277335 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30129): Launched 08:50:46.564098 run iperf3-srv_10.42.42.10(pid=30130): Launched 08:50:46.754671 tst cs_paging_gprs_active.py:38: start network... 08:50:46.886182 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:50:47.373215 run create_hlr_db(pid=30131): Launched 08:50:47.548130 bus /gobi_6: Setting Powered False 08:50:48.571317 run create_hlr_db(pid=30131): Terminated: ok {rc=0} 08:50:49.003839 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30133): Launched 08:50:49.330763 run osmo-hlr_10.42.42.2(pid=30134): Launched 08:50:49.454541 run osmo-stp_10.42.42.5: Starting osmo-stp 08:50:50.020398 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30136): Launched 08:50:50.347705 run osmo-stp_10.42.42.5(pid=30137): Launched 08:50:50.466277 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:50:51.036870 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30139): Launched 08:50:51.153264 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:50:51.438145 run patchelf(pid=30140): Launched 08:50:51.628531 run osmo-stp_10.42.42.5(pid=30137): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30137)] 08:50:51.766743 run osmo-stp_10.42.42.5(pid=30137): stdout: | (launched: 2022-12-14_08:50:50.185889) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:50:51.906095 run osmo-stp_10.42.42.5(pid=30137): stderr: | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085050378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:50:52.042912 run osmo-stp_10.42.42.5(pid=30137): stdout: | (launched: 2022-12-14_08:50:50.185889) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:50:52.176116 run osmo-stp_10.42.42.5(pid=30137): stderr: | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085050378 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085050378 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085050379 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:50:52.331076 run patchelf(pid=30140): Terminating (SIGINT) 08:50:52.513357 run patchelf(pid=30140): Terminated: ok {rc=0} 08:50:52.546836 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30137): Process ended prematurely: osmo-stp_10.42.42.5(pid=30137) [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30137)] [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:50:52.557017 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:50:52.620210 run osmo-hlr_10.42.42.2(pid=30134): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30134)] 08:50:52.671796 run osmo-hlr_10.42.42.2(pid=30134): stdout: | (launched: 2022-12-14_08:50:49.169709) 08:50:52.723758 run osmo-hlr_10.42.42.2(pid=30134): stderr: | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085049369 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085049381 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085049389 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085049390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085049390 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:50:52.768164 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30127): Terminating (SIGTERM) 08:50:52.810309 run iperf3-srv_10.42.42.10(pid=30128): Terminating (SIGTERM) 08:50:52.852072 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30129): Terminating (SIGTERM) 08:50:52.894281 run iperf3-srv_10.42.42.10(pid=30130): Terminating (SIGTERM) 08:50:52.936154 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30133): Terminating (SIGTERM) 08:50:52.977923 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30136): Terminating (SIGTERM) 08:50:53.019780 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30139): Terminating (SIGTERM) 08:50:53.029519 --- ParallelTerminationStrategy: PID 30127 died... 08:50:53.085893 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30127): Terminated: ok {rc=0} 08:50:53.096153 --- ParallelTerminationStrategy: PID 30128 died... 08:50:53.152178 run iperf3-srv_10.42.42.10(pid=30128): Terminated {rc=256} 08:50:53.162356 --- ParallelTerminationStrategy: PID 30129 died... 08:50:53.218429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30129): Terminated: ok {rc=0} 08:50:53.228587 --- ParallelTerminationStrategy: PID 30130 died... 08:50:53.284577 run iperf3-srv_10.42.42.10(pid=30130): Terminated {rc=256} 08:50:53.294624 --- ParallelTerminationStrategy: PID 30133 died... 08:50:53.350633 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30133): Terminated: ok {rc=0} 08:50:53.360631 --- ParallelTerminationStrategy: PID 30136 died... 08:50:53.416526 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30136): Terminated: ok {rc=0} 08:50:53.426761 --- ParallelTerminationStrategy: PID 30139 died... 08:50:53.482633 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30139): Terminated: ok {rc=0} 08:50:53.569097 bus /gobi_0: Setting Powered False 08:50:54.676735 bus /gobi_0: Setting Powered False 08:50:55.784016 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30137): Process ended prematurely: osmo-stp_10.42.42.5(pid=30137) [trial-2402↪gprs:trx-b200+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30137)]