Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=30254): Process ended prematurely: osmo-stp_10.42.42.5(pid=30254) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30254)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend ping_idle_ping.py ---------------------------------------------- 08:52:35.047641 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.060408 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:52:35.208887 tst ping_idle_ping.py: using LAC 39789 08:52:35.336941 tst ping_idle_ping.py: using RAC 9 08:52:35.464717 tst ping_idle_ping.py: using CellId 39789 08:52:35.591965 tst ping_idle_ping.py: using BVCI 39790 08:52:35.616712 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.628569 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.640326 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.651979 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.663616 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.675349 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.687486 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:52:35.699218 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:52:35.977463 tst ping_idle_ping.py:24: start network... 08:52:36.103043 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:52:36.582151 run create_hlr_db(pid=30248): Launched 08:52:36.755471 bus /gobi_6: Setting Powered False 08:52:37.775290 run create_hlr_db(pid=30248): Terminated: ok {rc=0} 08:52:38.203565 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30250): Launched 08:52:38.527064 run osmo-hlr_10.42.42.2(pid=30251): Launched 08:52:38.644075 run osmo-stp_10.42.42.5: Starting osmo-stp 08:52:39.203048 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30253): Launched 08:52:39.526424 run osmo-stp_10.42.42.5(pid=30254): Launched 08:52:39.641423 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:52:40.202649 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30256): Launched 08:52:40.316592 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:52:40.596086 run patchelf(pid=30257): Launched 08:52:40.783533 run osmo-stp_10.42.42.5(pid=30254): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30254)] 08:52:40.920667 run osmo-stp_10.42.42.5(pid=30254): stdout: | (launched: 2022-12-14_08:52:39.366744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:52:41.057640 run osmo-stp_10.42.42.5(pid=30254): stderr: | �[0;m�[38;5;43m20221214085239559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085239560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085239560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085239560 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:52:41.190253 run osmo-stp_10.42.42.5(pid=30254): stdout: | (launched: 2022-12-14_08:52:39.366744) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:52:41.320828 run osmo-stp_10.42.42.5(pid=30254): stderr: | �[0;m�[38;5;43m20221214085239559 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214085239560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214085239560 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214085239560 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214085239561 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:52:41.473684 run patchelf(pid=30257): Terminating (SIGINT) 08:52:41.651939 run patchelf(pid=30257): Terminated: ok {rc=0} 08:52:41.684526 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=30254): Process ended prematurely: osmo-stp_10.42.42.5(pid=30254) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30254)] [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27] 08:52:41.694054 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 08:52:41.756584 run osmo-hlr_10.42.42.2(pid=30251): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30251)] 08:52:41.808072 run osmo-hlr_10.42.42.2(pid=30251): stdout: | (launched: 2022-12-14_08:52:38.367186) 08:52:41.860370 run osmo-hlr_10.42.42.2(pid=30251): stderr: | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214085238565 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214085238581 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214085238589 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214085238590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214085238590 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:52:41.904835 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30250): Terminating (SIGTERM) 08:52:41.946776 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30253): Terminating (SIGTERM) 08:52:41.988462 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30256): Terminating (SIGTERM) 08:52:41.998182 --- ParallelTerminationStrategy: PID 30250 died... 08:52:42.054101 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30250): Terminated: ok {rc=0} 08:52:42.064159 --- ParallelTerminationStrategy: PID 30253 died... 08:52:42.119893 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30253): Terminated: ok {rc=0} 08:52:42.129945 --- ParallelTerminationStrategy: PID 30256 died... 08:52:42.185313 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30256): Terminated: ok {rc=0} 08:52:42.271939 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30254): Process ended prematurely: osmo-stp_10.42.42.5(pid=30254) [trial-2402↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30254)]