Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=32419): Process ended prematurely: osmo-stp_10.42.42.5(pid=32419) [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32419)]
Standard Output
---------------------------------------------- trial-2402 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 09:14:45.832931 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:45.845330 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 09:14:46.008328 tst cs_paging_gprs_active.py: using LAC 39908 09:14:46.141859 tst cs_paging_gprs_active.py: using RAC 128 09:14:46.267730 tst cs_paging_gprs_active.py: using CellId 39908 09:14:46.390222 tst cs_paging_gprs_active.py: using BVCI 39909 09:14:46.415328 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.428547 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.440381 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.452457 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.464942 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.479387 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.491936 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.504641 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 09:14:46.517530 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:14:46.665544 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 09:14:47.043092 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:14:47.202410 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:14:47.537190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32409): Launched 09:14:47.814383 run iperf3-srv_10.42.42.10(pid=32410): Launched 09:14:48.011943 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:14:48.146480 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:14:48.479362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32411): Launched 09:14:48.756882 run iperf3-srv_10.42.42.10(pid=32412): Launched 09:14:48.954125 tst cs_paging_gprs_active.py:38: start network... 09:14:49.088339 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:14:49.602376 run create_hlr_db(pid=32413): Launched 09:14:49.786724 bus /gobi_6: Setting Powered False 09:14:50.808367 run create_hlr_db(pid=32413): Terminated: ok {rc=0} 09:14:51.216541 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32415): Launched 09:14:51.536835 run osmo-hlr_10.42.42.2(pid=32416): Launched 09:14:51.657589 run osmo-stp_10.42.42.5: Starting osmo-stp 09:14:52.217778 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32418): Launched 09:14:52.538014 run osmo-stp_10.42.42.5(pid=32419): Launched 09:14:52.654653 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:14:53.213682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32421): Launched 09:14:53.328015 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:14:53.607146 run patchelf(pid=32422): Launched 09:14:53.795141 run osmo-stp_10.42.42.5(pid=32419): ERR: Terminated: ERROR {rc=1} [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32419)] 09:14:53.932445 run osmo-stp_10.42.42.5(pid=32419): stdout: | (launched: 2022-12-14_09:14:52.381371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:14:54.069235 run osmo-stp_10.42.42.5(pid=32419): stderr: | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214091452572 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:14:54.201543 run osmo-stp_10.42.42.5(pid=32419): stdout: | (launched: 2022-12-14_09:14:52.381371) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:14:54.333111 run osmo-stp_10.42.42.5(pid=32419): stderr: | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214091452572 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214091452572 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214091452573 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:14:54.485520 run patchelf(pid=32422): Terminating (SIGINT) 09:14:54.664931 run patchelf(pid=32422): Terminated: ok {rc=0} 09:14:54.698094 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=32419): Process ended prematurely: osmo-stp_10.42.42.5(pid=32419) [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32419)] [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 09:14:54.707996 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 09:14:54.771274 run osmo-hlr_10.42.42.2(pid=32416): ERR: Terminated: ERROR {rc=237} [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=32416)] 09:14:54.822462 run osmo-hlr_10.42.42.2(pid=32416): stdout: | (launched: 2022-12-14_09:14:51.379810) 09:14:54.874079 run osmo-hlr_10.42.42.2(pid=32416): stderr: | �[0;m�[1;31m20221214091451574 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214091451574 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214091451574 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214091451574 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214091451574 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214091451575 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214091451587 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2402/run.2022-12-14_08-25-21/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214091451595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214091451595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214091451595 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:14:54.918204 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32409): Terminating (SIGTERM) 09:14:54.959570 run iperf3-srv_10.42.42.10(pid=32410): Terminating (SIGTERM) 09:14:55.001137 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32411): Terminating (SIGTERM) 09:14:55.042460 run iperf3-srv_10.42.42.10(pid=32412): Terminating (SIGTERM) 09:14:55.084050 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32415): Terminating (SIGTERM) 09:14:55.125812 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32418): Terminating (SIGTERM) 09:14:55.167389 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32421): Terminating (SIGTERM) 09:14:55.177138 --- ParallelTerminationStrategy: PID 32409 died... 09:14:55.232719 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32409): Terminated: ok {rc=0} 09:14:55.242827 --- ParallelTerminationStrategy: PID 32410 died... 09:14:55.298171 run iperf3-srv_10.42.42.10(pid=32410): Terminated {rc=256} 09:14:55.308197 --- ParallelTerminationStrategy: PID 32411 died... 09:14:55.363801 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=32411): Terminated: ok {rc=0} 09:14:55.373892 --- ParallelTerminationStrategy: PID 32412 died... 09:14:55.430802 run iperf3-srv_10.42.42.10(pid=32412): Terminated {rc=256} 09:14:55.440814 --- ParallelTerminationStrategy: PID 32415 died... 09:14:55.496732 run pcap-recorder_any(filters='host 10.42.42.2')(pid=32415): Terminated: ok {rc=0} 09:14:55.506917 --- ParallelTerminationStrategy: PID 32418 died... 09:14:55.562672 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=32418): Terminated: ok {rc=0} 09:14:55.572754 --- ParallelTerminationStrategy: PID 32421 died... 09:14:55.628399 run pcap-recorder_any(filters='host 10.42.42.6')(pid=32421): Terminated: ok {rc=0} 09:14:55.714507 bus /gobi_0: Setting Powered False 09:14:56.819848 bus /gobi_0: Setting Powered False 09:14:57.929107 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=32419): Process ended prematurely: osmo-stp_10.42.42.5(pid=32419) [trial-2402↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=32419)]