Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=5289): Process ended prematurely: osmo-stp_10.42.42.5(pid=5289) [trial-2403↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5289)]
Standard Output
---------------------------------------------- trial-2403 gprs:oc2g ping.py ---------------------------------------------- 10:07:06.939812 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:06.951611 tst gprs:oc2g: Using 1 x bts (candidates: 1) 10:07:07.082388 tst ping.py: using LAC 40183 10:07:07.208556 tst ping.py: using RAC 148 10:07:07.334041 tst ping.py: using CellId 40183 10:07:07.459969 tst ping.py: using BVCI 40184 10:07:07.484627 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.495747 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.506748 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.517593 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.528323 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.539114 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.550170 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 10:07:07.561261 tst gprs:oc2g: Using 1 x modem (candidates: 4) 10:07:07.841947 tst ping.py:19: start network... 10:07:07.967543 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:07:08.441174 run create_hlr_db(pid=5283): Launched 10:07:08.614675 bus /gobi_6: Setting Powered False 10:07:09.635187 run create_hlr_db(pid=5283): Terminated: ok {rc=0} 10:07:10.066457 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5285): Launched 10:07:10.391304 run osmo-hlr_10.42.42.2(pid=5286): Launched 10:07:10.508027 run osmo-stp_10.42.42.5: Starting osmo-stp 10:07:11.073701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5288): Launched 10:07:11.396382 run osmo-stp_10.42.42.5(pid=5289): Launched 10:07:11.513252 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:07:12.078740 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5291): Launched 10:07:12.193390 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:07:12.476247 run patchelf(pid=5292): Launched 10:07:12.665028 run osmo-stp_10.42.42.5(pid=5289): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5289)] 10:07:12.803186 run osmo-stp_10.42.42.5(pid=5289): stdout: | (launched: 2022-12-14_10:07:11.238108) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:12.942403 run osmo-stp_10.42.42.5(pid=5289): stderr: | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100711430 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:13.076547 run osmo-stp_10.42.42.5(pid=5289): stdout: | (launched: 2022-12-14_10:07:11.238108) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:07:13.208806 run osmo-stp_10.42.42.5(pid=5289): stderr: | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214100711429 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214100711430 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214100711430 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:07:13.362827 run patchelf(pid=5292): Terminating (SIGINT) 10:07:13.543991 run patchelf(pid=5292): Terminated: ok {rc=0} 10:07:13.576993 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=5289): Process ended prematurely: osmo-stp_10.42.42.5(pid=5289) [trial-2403↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5289)] [trial-2403↪gprs:oc2g↪ping.py:22] 10:07:13.586562 tst ping.py:22: Test FAILED (6.6 sec) 10:07:13.650529 run osmo-hlr_10.42.42.2(pid=5286): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5286)] 10:07:13.702943 run osmo-hlr_10.42.42.2(pid=5286): stdout: | (launched: 2022-12-14_10:07:10.230739) 10:07:13.755931 run osmo-hlr_10.42.42.2(pid=5286): stderr: | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214100710427 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214100710443 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214100710452 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214100710453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214100710453 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:07:13.801128 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5285): Terminating (SIGTERM) 10:07:13.843955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5288): Terminating (SIGTERM) 10:07:13.887072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5291): Terminating (SIGTERM) 10:07:13.897113 --- ParallelTerminationStrategy: PID 5285 died... 10:07:13.954092 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5285): Terminated: ok {rc=0} 10:07:13.964492 --- ParallelTerminationStrategy: PID 5288 died... 10:07:14.020916 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5288): Terminated: ok {rc=0} 10:07:14.031277 --- ParallelTerminationStrategy: PID 5291 died... 10:07:14.087740 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5291): Terminated: ok {rc=0} 10:07:14.174525 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5289): Process ended prematurely: osmo-stp_10.42.42.5(pid=5289) [trial-2403↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5289)]