Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=7230): Process ended prematurely: osmo-stp_10.42.42.5(pid=7230) [trial-2403↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7230)]
Standard Output
---------------------------------------------- trial-2403 gprs:trx-b200 ping.py ---------------------------------------------- 10:15:46.610702 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:46.622330 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 10:15:46.763209 tst ping.py: using LAC 40229 10:15:46.900559 tst ping.py: using RAC 194 10:15:47.025938 tst ping.py: using CellId 40229 10:15:47.154490 tst ping.py: using BVCI 40230 10:15:47.180246 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.192236 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.204229 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.216050 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.228677 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.241296 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.253153 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 10:15:47.264754 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 10:15:47.546906 tst ping.py:19: start network... 10:15:47.672564 run osmo-hlr_10.42.42.2: Starting osmo-hlr 10:15:48.147390 run create_hlr_db(pid=7224): Launched 10:15:48.322436 bus /gobi_6: Setting Powered False 10:15:49.343252 run create_hlr_db(pid=7224): Terminated: ok {rc=0} 10:15:49.747973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7226): Launched 10:15:50.050491 run osmo-hlr_10.42.42.2(pid=7227): Launched 10:15:50.166969 run osmo-stp_10.42.42.5: Starting osmo-stp 10:15:50.704000 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7229): Launched 10:15:51.006256 run osmo-stp_10.42.42.5(pid=7230): Launched 10:15:51.115958 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 10:15:51.642053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7232): Launched 10:15:51.748526 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 10:15:52.019417 run patchelf(pid=7233): Launched 10:15:52.208576 run osmo-stp_10.42.42.5(pid=7230): ERR: Terminated: ERROR {rc=1} [trial-2403↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7230)] 10:15:52.347197 run osmo-stp_10.42.42.5(pid=7230): stdout: | (launched: 2022-12-14_10:15:50.856229) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:15:52.486502 run osmo-stp_10.42.42.5(pid=7230): stderr: | �[0;m�[38;5;43m20221214101551028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101551028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101551029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101551029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:15:52.619855 run osmo-stp_10.42.42.5(pid=7230): stdout: | (launched: 2022-12-14_10:15:50.856229) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 10:15:52.751607 run osmo-stp_10.42.42.5(pid=7230): stderr: | �[0;m�[38;5;43m20221214101551028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214101551028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214101551029 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214101551029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214101551030 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 10:15:52.905518 run patchelf(pid=7233): Terminating (SIGINT) 10:15:53.086686 run patchelf(pid=7233): Terminated: ok {rc=0} 10:15:53.119629 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=7230): Process ended prematurely: osmo-stp_10.42.42.5(pid=7230) [trial-2403↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7230)] [trial-2403↪gprs:trx-b200↪ping.py:22] 10:15:53.129089 tst ping.py:22: Test FAILED (6.5 sec) 10:15:53.192570 run osmo-hlr_10.42.42.2(pid=7227): ERR: Terminated: ERROR {rc=237} [trial-2403↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7227)] 10:15:53.244342 run osmo-hlr_10.42.42.2(pid=7227): stdout: | (launched: 2022-12-14_10:15:49.900941) 10:15:53.297408 run osmo-hlr_10.42.42.2(pid=7227): stderr: | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214101550079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214101550091 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2403/run.2022-12-14_09-52-37/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214101550099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214101550099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214101550099 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 10:15:53.342286 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7226): Terminating (SIGTERM) 10:15:53.384506 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7229): Terminating (SIGTERM) 10:15:53.427123 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7232): Terminating (SIGTERM) 10:15:53.436864 --- ParallelTerminationStrategy: PID 7226 died... 10:15:53.493251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7226): Terminated: ok {rc=0} 10:15:53.503377 --- ParallelTerminationStrategy: PID 7229 died... 10:15:53.559321 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7229): Terminated: ok {rc=0} 10:15:53.569860 --- ParallelTerminationStrategy: PID 7232 died... 10:15:53.625555 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7232): Terminated: ok {rc=0} 10:15:53.712383 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7230): Process ended prematurely: osmo-stp_10.42.42.5(pid=7230) [trial-2403↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7230)]