Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=22860): Process ended prematurely: osmo-stp_10.42.42.5(pid=22860) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22860)]
Standard Output
---------------------------------------------- trial-2404 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 12:38:49.521224 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:49.533694 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 12:38:49.679061 tst iperf3.py: using LAC 40954 12:38:49.804911 tst iperf3.py: using RAC 154 12:38:49.935614 tst iperf3.py: using CellId 40954 12:38:50.059799 tst iperf3.py: using BVCI 40955 12:38:50.084431 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.096489 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.108136 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.119694 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.131383 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.142963 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.154701 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.166227 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 12:38:50.178082 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 12:38:50.457036 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 12:38:50.581543 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:38:50.891469 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22852): Launched 12:38:51.149980 run iperf3-srv_10.42.42.10(pid=22853): Launched 12:38:51.330922 tst iperf3.py:8: start network... 12:38:51.454582 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:38:51.926582 run create_hlr_db(pid=22854): Launched 12:38:52.098139 bus /gobi_6: Setting Powered False 12:38:53.120681 run create_hlr_db(pid=22854): Terminated: ok {rc=0} 12:38:53.547564 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22856): Launched 12:38:53.868510 run osmo-hlr_10.42.42.2(pid=22857): Launched 12:38:53.992701 run osmo-stp_10.42.42.5: Starting osmo-stp 12:38:54.552435 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22859): Launched 12:38:54.874257 run osmo-stp_10.42.42.5(pid=22860): Launched 12:38:54.990170 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:38:55.551892 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22863): Launched 12:38:55.667094 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:38:55.947651 run patchelf(pid=22864): Launched 12:38:56.136237 run osmo-stp_10.42.42.5(pid=22860): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22860)] 12:38:56.273885 run osmo-stp_10.42.42.5(pid=22860): stdout: | (launched: 2022-12-14_12:38:54.715992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:38:56.411821 run osmo-stp_10.42.42.5(pid=22860): stderr: | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214123854908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:38:56.545191 run osmo-stp_10.42.42.5(pid=22860): stdout: | (launched: 2022-12-14_12:38:54.715992) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:38:56.677793 run osmo-stp_10.42.42.5(pid=22860): stderr: | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214123854907 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214123854908 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214123854908 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:38:56.831452 run patchelf(pid=22864): Terminating (SIGINT) 12:38:57.011560 run patchelf(pid=22864): Terminated: ok {rc=0} 12:38:57.044767 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=22860): Process ended prematurely: osmo-stp_10.42.42.5(pid=22860) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22860)] [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 12:38:57.054743 tst iperf3.py:8: Test FAILED (7.6 sec) 12:38:57.117998 run osmo-hlr_10.42.42.2(pid=22857): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=22857)] 12:38:57.169281 run osmo-hlr_10.42.42.2(pid=22857): stdout: | (launched: 2022-12-14_12:38:53.710842) 12:38:57.221169 run osmo-hlr_10.42.42.2(pid=22857): stderr: | �[0;m�[1;31m20221214123853907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214123853907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214123853907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214123853908 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214123853908 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214123853908 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214123853920 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214123853929 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214123853929 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214123853929 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:38:57.265210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22852): Terminating (SIGTERM) 12:38:57.307067 run iperf3-srv_10.42.42.10(pid=22853): Terminating (SIGTERM) 12:38:57.348730 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22856): Terminating (SIGTERM) 12:38:57.390714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22859): Terminating (SIGTERM) 12:38:57.432177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22863): Terminating (SIGTERM) 12:38:57.441784 --- ParallelTerminationStrategy: PID 22852 died... 12:38:57.497025 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=22852): Terminated: ok {rc=0} 12:38:57.506813 --- ParallelTerminationStrategy: PID 22853 died... 12:38:57.562004 run iperf3-srv_10.42.42.10(pid=22853): Terminated {rc=256} 12:38:57.571964 --- ParallelTerminationStrategy: PID 22856 died... 12:38:57.627211 run pcap-recorder_any(filters='host 10.42.42.2')(pid=22856): Terminated: ok {rc=0} 12:38:57.637124 --- ParallelTerminationStrategy: PID 22859 died... 12:38:57.692290 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=22859): Terminated: ok {rc=0} 12:38:57.702299 --- ParallelTerminationStrategy: PID 22863 died... 12:38:57.757031 run pcap-recorder_any(filters='host 10.42.42.6')(pid=22863): Terminated: ok {rc=0} 12:38:57.843405 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=22860): Process ended prematurely: osmo-stp_10.42.42.5(pid=22860) [trial-2404↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=22860)]