Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=18029): Process ended prematurely: osmo-stp_10.42.42.5(pid=18029) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18029)]
Standard Output
---------------------------------------------- trial-2404 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 11:49:13.775339 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:13.786391 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 11:49:13.930734 tst cs_paging_gprs_active.py: using LAC 40692 11:49:14.063150 tst cs_paging_gprs_active.py: using RAC 147 11:49:14.187717 tst cs_paging_gprs_active.py: using CellId 40692 11:49:14.316485 tst cs_paging_gprs_active.py: using BVCI 40693 11:49:14.341388 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.352472 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.363387 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.374361 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.385285 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.396166 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.407316 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.418165 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 11:49:14.429269 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:49:14.545725 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 11:49:14.842661 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 11:49:14.977315 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:49:15.314935 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18019): Launched 11:49:15.593200 run iperf3-srv_10.42.42.10(pid=18020): Launched 11:49:15.790881 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 11:49:15.927159 run iperf3-srv_10.42.42.10: Starting iperf3-srv 11:49:16.277267 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Launched 11:49:16.575961 run iperf3-srv_10.42.42.10(pid=18022): Launched 11:49:16.778898 tst cs_paging_gprs_active.py:38: start network... 11:49:16.916540 run osmo-hlr_10.42.42.2: Starting osmo-hlr 11:49:17.458657 run create_hlr_db(pid=18023): Launched 11:49:17.646345 bus /gobi_6: Setting Powered False 11:49:18.667784 run create_hlr_db(pid=18023): Terminated: ok {rc=0} 11:49:19.076791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18025): Launched 11:49:19.380519 run osmo-hlr_10.42.42.2(pid=18026): Launched 11:49:19.497621 run osmo-stp_10.42.42.5: Starting osmo-stp 11:49:20.031046 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18028): Launched 11:49:20.334698 run osmo-stp_10.42.42.5(pid=18029): Launched 11:49:20.444908 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 11:49:20.973238 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18031): Launched 11:49:21.080849 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 11:49:21.347290 run patchelf(pid=18032): Launched 11:49:21.527734 run osmo-stp_10.42.42.5(pid=18029): ERR: Terminated: ERROR {rc=1} [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18029)] 11:49:21.658928 run osmo-stp_10.42.42.5(pid=18029): stdout: | (launched: 2022-12-14_11:49:20.184570) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:49:21.790499 run osmo-stp_10.42.42.5(pid=18029): stderr: | �[0;m�[38;5;43m20221214114920351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114920352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114920352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114920352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:49:21.916939 run osmo-stp_10.42.42.5(pid=18029): stdout: | (launched: 2022-12-14_11:49:20.184570) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 11:49:22.043128 run osmo-stp_10.42.42.5(pid=18029): stderr: | �[0;m�[38;5;43m20221214114920351 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214114920352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214114920352 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214114920352 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214114920353 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 11:49:22.189791 run patchelf(pid=18032): Terminating (SIGINT) 11:49:22.361898 run patchelf(pid=18032): Terminated: ok {rc=0} 11:49:22.393643 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18029): Process ended prematurely: osmo-stp_10.42.42.5(pid=18029) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18029)] [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 11:49:22.402770 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 11:49:22.462888 run osmo-hlr_10.42.42.2(pid=18026): ERR: Terminated: ERROR {rc=237} [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18026)] 11:49:22.511767 run osmo-hlr_10.42.42.2(pid=18026): stdout: | (launched: 2022-12-14_11:49:19.230849) 11:49:22.561435 run osmo-hlr_10.42.42.2(pid=18026): stderr: | �[0;m�[1;31m20221214114919403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214114919403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214114919404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214114919404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214114919404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214114919404 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214114919416 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2404/run.2022-12-14_11-25-45/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214114919427 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214114919427 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214114919427 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 11:49:22.603949 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18019): Terminating (SIGTERM) 11:49:22.643960 run iperf3-srv_10.42.42.10(pid=18020): Terminating (SIGTERM) 11:49:22.683855 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Terminating (SIGTERM) 11:49:22.723359 run iperf3-srv_10.42.42.10(pid=18022): Terminating (SIGTERM) 11:49:22.763170 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18025): Terminating (SIGTERM) 11:49:22.802900 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18028): Terminating (SIGTERM) 11:49:22.842679 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18031): Terminating (SIGTERM) 11:49:22.851760 --- ParallelTerminationStrategy: PID 18019 died... 11:49:22.905404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18019): Terminated: ok {rc=0} 11:49:22.914776 --- ParallelTerminationStrategy: PID 18020 died... 11:49:22.967777 run iperf3-srv_10.42.42.10(pid=18020): Terminated {rc=256} 11:49:22.977174 --- ParallelTerminationStrategy: PID 18021 died... 11:49:23.030189 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18021): Terminated: ok {rc=0} 11:49:23.039538 --- ParallelTerminationStrategy: PID 18022 died... 11:49:23.092386 run iperf3-srv_10.42.42.10(pid=18022): Terminated {rc=256} 11:49:23.101772 --- ParallelTerminationStrategy: PID 18025 died... 11:49:23.155027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18025): Terminated: ok {rc=0} 11:49:23.164476 --- ParallelTerminationStrategy: PID 18028 died... 11:49:23.217335 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18028): Terminated: ok {rc=0} 11:49:23.226691 --- ParallelTerminationStrategy: PID 18031 died... 11:49:23.279406 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18031): Terminated: ok {rc=0} 11:49:23.366639 bus /gobi_0: Setting Powered False 11:49:24.470014 bus /gobi_0: Setting Powered False 11:49:25.578298 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18029): Process ended prematurely: osmo-stp_10.42.42.5(pid=18029) [trial-2404↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18029)]