Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=1993): Process ended prematurely: osmo-stp_10.42.42.5(pid=1993) [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1993)]
Standard Output
---------------------------------------------- trial-2406 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 14:37:31.328699 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.340790 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 14:37:31.490318 tst cs_paging_gprs_active.py: using LAC 41578 14:37:31.620471 tst cs_paging_gprs_active.py: using RAC 13 14:37:31.749229 tst cs_paging_gprs_active.py: using CellId 41578 14:37:31.875030 tst cs_paging_gprs_active.py: using BVCI 41579 14:37:31.900439 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.913286 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.924739 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.936458 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.949685 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.962573 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.975562 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:31.988098 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 14:37:32.001083 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:37:32.122512 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 14:37:32.403713 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:37:32.531871 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:37:32.848518 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1983): Launched 14:37:33.112527 run iperf3-srv_10.42.42.10(pid=1984): Launched 14:37:33.299001 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:37:33.426607 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:37:33.743338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1985): Launched 14:37:34.009411 run iperf3-srv_10.42.42.10(pid=1986): Launched 14:37:34.194941 tst cs_paging_gprs_active.py:38: start network... 14:37:34.321881 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:37:34.807402 run create_hlr_db(pid=1987): Launched 14:37:34.982251 bus /gobi_6: Setting Powered False 14:37:36.004803 run create_hlr_db(pid=1987): Terminated: ok {rc=0} 14:37:36.411779 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1989): Launched 14:37:36.718630 run osmo-hlr_10.42.42.2(pid=1990): Launched 14:37:36.834608 run osmo-stp_10.42.42.5: Starting osmo-stp 14:37:37.365673 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1992): Launched 14:37:37.675133 run osmo-stp_10.42.42.5(pid=1993): Launched 14:37:37.786679 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:37:38.319307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1995): Launched 14:37:38.428127 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:37:38.696254 run patchelf(pid=1996): Launched 14:37:38.875688 run osmo-stp_10.42.42.5(pid=1993): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1993)] 14:37:39.006612 run osmo-stp_10.42.42.5(pid=1993): stdout: | (launched: 2022-12-14_14:37:37.520755) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:37:39.137780 run osmo-stp_10.42.42.5(pid=1993): stderr: | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143737696 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:37:39.264622 run osmo-stp_10.42.42.5(pid=1993): stdout: | (launched: 2022-12-14_14:37:37.520755) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:37:39.390400 run osmo-stp_10.42.42.5(pid=1993): stderr: | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214143737695 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214143737696 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214143737696 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:37:39.536776 run patchelf(pid=1996): Terminating (SIGINT) 14:37:39.708689 run patchelf(pid=1996): Terminated: ok {rc=0} 14:37:39.740218 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=1993): Process ended prematurely: osmo-stp_10.42.42.5(pid=1993) [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1993)] [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 14:37:39.749591 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 14:37:39.809611 run osmo-hlr_10.42.42.2(pid=1990): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=1990)] 14:37:39.858695 run osmo-hlr_10.42.42.2(pid=1990): stdout: | (launched: 2022-12-14_14:37:36.566918) 14:37:39.908469 run osmo-hlr_10.42.42.2(pid=1990): stderr: | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214143736746 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214143736758 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214143736767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214143736767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214143736767 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:37:39.951092 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1983): Terminating (SIGTERM) 14:37:39.990955 run iperf3-srv_10.42.42.10(pid=1984): Terminating (SIGTERM) 14:37:40.030979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1985): Terminating (SIGTERM) 14:37:40.070886 run iperf3-srv_10.42.42.10(pid=1986): Terminating (SIGTERM) 14:37:40.111015 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1989): Terminating (SIGTERM) 14:37:40.150815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1992): Terminating (SIGTERM) 14:37:40.190716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1995): Terminating (SIGTERM) 14:37:40.199803 --- ParallelTerminationStrategy: PID 1983 died... 14:37:40.253208 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1983): Terminated: ok {rc=0} 14:37:40.262639 --- ParallelTerminationStrategy: PID 1984 died... 14:37:40.315658 run iperf3-srv_10.42.42.10(pid=1984): Terminated {rc=256} 14:37:40.325123 --- ParallelTerminationStrategy: PID 1985 died... 14:37:40.378158 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=1985): Terminated: ok {rc=0} 14:37:40.387499 --- ParallelTerminationStrategy: PID 1986 died... 14:37:40.440594 run iperf3-srv_10.42.42.10(pid=1986): Terminated {rc=256} 14:37:40.449965 --- ParallelTerminationStrategy: PID 1989 died... 14:37:40.502885 run pcap-recorder_any(filters='host 10.42.42.2')(pid=1989): Terminated: ok {rc=0} 14:37:40.512231 --- ParallelTerminationStrategy: PID 1992 died... 14:37:40.565343 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=1992): Terminated: ok {rc=0} 14:37:40.574733 --- ParallelTerminationStrategy: PID 1995 died... 14:37:40.627659 run pcap-recorder_any(filters='host 10.42.42.6')(pid=1995): Terminated: ok {rc=0} 14:37:40.715896 bus /gobi_0: Setting Powered False 14:37:41.819000 bus /gobi_0: Setting Powered False 14:37:42.925222 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=1993): Process ended prematurely: osmo-stp_10.42.42.5(pid=1993) [trial-2406↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=1993)]