Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=724): Process ended prematurely: osmo-stp_10.42.42.5(pid=724) [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=724)]
Standard Output
---------------------------------------------- trial-2406 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 14:27:34.386578 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.397118 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 14:27:34.519741 tst cs_paging_gprs_active.py: using LAC 41526 14:27:34.638979 tst cs_paging_gprs_active.py: using RAC 216 14:27:34.759909 tst cs_paging_gprs_active.py: using CellId 41526 14:27:34.876746 tst cs_paging_gprs_active.py: using BVCI 41527 14:27:34.899676 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.910429 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.920870 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.931350 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.941979 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.953456 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.964401 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.975087 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 14:27:34.985992 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:27:35.101545 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 14:27:35.395649 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 14:27:35.530749 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:27:35.865080 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=714): Launched 14:27:36.143384 run iperf3-srv_10.42.42.10(pid=715): Launched 14:27:36.341902 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 14:27:36.477003 run iperf3-srv_10.42.42.10: Starting iperf3-srv 14:27:36.812276 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=716): Launched 14:27:37.091132 run iperf3-srv_10.42.42.10(pid=717): Launched 14:27:37.289489 tst cs_paging_gprs_active.py:38: start network... 14:27:37.424052 run osmo-hlr_10.42.42.2: Starting osmo-hlr 14:27:37.941276 run create_hlr_db(pid=718): Launched 14:27:38.128617 bus /gobi_6: Setting Powered False 14:27:39.148702 run create_hlr_db(pid=718): Terminated: ok {rc=0} 14:27:39.554618 run pcap-recorder_any(filters='host 10.42.42.2')(pid=720): Launched 14:27:39.856312 run osmo-hlr_10.42.42.2(pid=721): Launched 14:27:39.974894 run osmo-stp_10.42.42.5: Starting osmo-stp 14:27:40.505973 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=723): Launched 14:27:40.807691 run osmo-stp_10.42.42.5(pid=724): Launched 14:27:40.917869 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 14:27:41.442526 run pcap-recorder_any(filters='host 10.42.42.6')(pid=726): Launched 14:27:41.549882 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 14:27:41.813268 run patchelf(pid=727): Launched 14:27:41.990243 run osmo-stp_10.42.42.5(pid=724): ERR: Terminated: ERROR {rc=1} [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=724)] 14:27:42.119104 run osmo-stp_10.42.42.5(pid=724): stdout: | (launched: 2022-12-14_14:27:40.658918) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:27:42.247964 run osmo-stp_10.42.42.5(pid=724): stderr: | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142740829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:27:42.372857 run osmo-stp_10.42.42.5(pid=724): stdout: | (launched: 2022-12-14_14:27:40.658918) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 14:27:42.496580 run osmo-stp_10.42.42.5(pid=724): stderr: | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221214142740829 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221214142740829 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221214142740830 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 14:27:42.641186 run patchelf(pid=727): Terminating (SIGINT) 14:27:42.810573 run patchelf(pid=727): Terminated: ok {rc=0} 14:27:42.841607 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=724): Process ended prematurely: osmo-stp_10.42.42.5(pid=724) [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=724)] [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 14:27:42.850749 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 14:27:42.911811 run osmo-hlr_10.42.42.2(pid=721): ERR: Terminated: ERROR {rc=237} [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=721)] 14:27:42.961192 run osmo-hlr_10.42.42.2(pid=721): stdout: | (launched: 2022-12-14_14:27:39.707521) 14:27:43.010971 run osmo-hlr_10.42.42.2(pid=721): stderr: | �[0;m�[1;31m20221214142739881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221214142739881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221214142739881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221214142739881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221214142739881 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221214142739882 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221214142739894 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2406/run.2022-12-14_14-20-43/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221214142739902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221214142739902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221214142739902 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 14:27:43.053613 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=714): Terminating (SIGTERM) 14:27:43.093647 run iperf3-srv_10.42.42.10(pid=715): Terminating (SIGTERM) 14:27:43.133791 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=716): Terminating (SIGTERM) 14:27:43.173756 run iperf3-srv_10.42.42.10(pid=717): Terminating (SIGTERM) 14:27:43.213950 run pcap-recorder_any(filters='host 10.42.42.2')(pid=720): Terminating (SIGTERM) 14:27:43.254036 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=723): Terminating (SIGTERM) 14:27:43.294257 run pcap-recorder_any(filters='host 10.42.42.6')(pid=726): Terminating (SIGTERM) 14:27:43.303382 --- ParallelTerminationStrategy: PID 714 died... 14:27:43.357074 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=714): Terminated: ok {rc=0} 14:27:43.366566 --- ParallelTerminationStrategy: PID 715 died... 14:27:43.420394 run iperf3-srv_10.42.42.10(pid=715): Terminated {rc=256} 14:27:43.429857 --- ParallelTerminationStrategy: PID 716 died... 14:27:43.483104 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=716): Terminated: ok {rc=0} 14:27:43.492488 --- ParallelTerminationStrategy: PID 717 died... 14:27:43.545765 run iperf3-srv_10.42.42.10(pid=717): Terminated {rc=256} 14:27:43.555168 --- ParallelTerminationStrategy: PID 720 died... 14:27:43.608425 run pcap-recorder_any(filters='host 10.42.42.2')(pid=720): Terminated: ok {rc=0} 14:27:43.617887 --- ParallelTerminationStrategy: PID 723 died... 14:27:43.671176 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=723): Terminated: ok {rc=0} 14:27:43.680660 --- ParallelTerminationStrategy: PID 726 died... 14:27:43.733822 run pcap-recorder_any(filters='host 10.42.42.6')(pid=726): Terminated: ok {rc=0} 14:27:43.820920 bus /gobi_0: Setting Powered False 14:27:44.924899 bus /gobi_0: Setting Powered False 14:27:46.041053 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=724): Process ended prematurely: osmo-stp_10.42.42.5(pid=724) [trial-2406↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=724)]