# Makefile.in generated by automake 1.16.5 from Makefile.am. # host/swig/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # # Copyright 2001,2003,2004,2006,2007,2008,2009,2010 Free Software Foundation, Inc. # # This file is part of GNU Radio # # GNU Radio is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # GNU Radio is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Radio; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, # Boston, MA 02110-1301, USA. # # -*- Makefile -*- # # Copyright 2004,2006,2007,2008,2009,2010 Free Software Foundation, Inc. # # This file is part of GNU Radio # # GNU Radio is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # GNU Radio is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Radio; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, # Boston, MA 02110-1301, USA. # # -*- Makefile -*- # # Copyright 2009,2010 Free Software Foundation, Inc. # # This file is part of GNU Radio # # GNU Radio is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3, or (at your option) # any later version. # # GNU Radio is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with GNU Radio; see the file COPYING. If not, write to # the Free Software Foundation, Inc., 51 Franklin Street, # Boston, MA 02110-1301, USA. # am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/libusrp pkgincludedir = $(includedir)/libusrp pkglibdir = $(libdir)/libusrp pkglibexecdir = $(libexecdir)/libusrp am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu #am__append_1 = $(PYTHON_GEN) # Now add .h, .cc to _all_ #am__append_2 = $(PYTHON_GEN) $(foreach \ # IFILE,$(TOP_SWIG_IFILES), $(patsubst \ # %.i,python/%.h,$(IFILE))) $(foreach \ # IFILE,$(TOP_SWIG_IFILES), $(patsubst \ # %.i,python/%.cc,$(IFILE))) #am__append_3 = $(GUILE_GEN) # Now add -primitive.scm, .cc to _all_ #am__append_4 = $(GUILE_GEN) $(foreach \ # IFILE,$(TOP_SWIG_IFILES), $(patsubst \ # %.i,gnuradio/%-primitive.scm,$(IFILE))) $(foreach \ # IFILE,$(TOP_SWIG_IFILES), $(patsubst \ # %.i,guile/%.cc,$(IFILE))) subdir = host/swig ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_boost_base.m4 \ $(top_srcdir)/m4/ax_boost_date_time.m4 \ $(top_srcdir)/m4/ax_boost_filesystem.m4 \ $(top_srcdir)/m4/ax_boost_program_options.m4 \ $(top_srcdir)/m4/ax_boost_system.m4 \ $(top_srcdir)/m4/ax_boost_thread.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/usrp_sdcc.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.swig.gen \ $(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} '/build/coverity/source-Osmocom/libusrp/missing' aclocal-1.16 AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = ar AUTOCONF = ${SHELL} '/build/coverity/source-Osmocom/libusrp/missing' autoconf AUTOHEADER = ${SHELL} '/build/coverity/source-Osmocom/libusrp/missing' autoheader # Make rebuilds less verbose with stuff we can safely ignore # about GNU make only extensions. AUTOMAKE = ${SHELL} '/build/coverity/source-Osmocom/libusrp/missing' automake-1.16 -Wno-portability -Wnone AWK = gawk BOOST_CPPFLAGS = -pthread -I/usr/include BOOST_DATE_TIME_LIB = -lboost_date_time BOOST_FILESYSTEM_LIB = -lboost_filesystem BOOST_LDFLAGS = -L/usr/lib/x86_64-linux-gnu BOOST_PROGRAM_OPTIONS_LIB = -lboost_program_options BOOST_SYSTEM_LIB = -lboost_system BOOST_THREAD_LIB = -lboost_thread -lpthread CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -std=gnu11 CPPFLAGS = CSCOPE = cscope CTAGS = ctags CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DEFS = -DPACKAGE_NAME=\"libusrp\" -DPACKAGE_TARNAME=\"libusrp\" -DPACKAGE_VERSION=\"3.4.9.1-7530\" -DPACKAGE_STRING=\"libusrp\ 3.4.9.1-7530\" -DPACKAGE_BUGREPORT=\"openbsc@lists.osmocom.org\" -DPACKAGE_URL=\"\" -DPACKAGE=\"libusrp\" -DVERSION=\"3.4.9.1-7530\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DSTDC_HEADERS=1 -DHAVE_DLFCN_H=1 -DLT_OBJDIR=\".libs/\" -DHAVE_BOOST=/\*\*/ -DHAVE_BOOST_THREAD=/\*\*/ -DHAVE_BOOST_DATE_TIME=/\*\*/ -DHAVE_BOOST_FILESYSTEM=/\*\*/ -DHAVE_BOOST_PROGRAM_OPTIONS=/\*\*/ -DHAVE_BOOST_SYSTEM=/\*\*/ DEPDIR = .deps DLLTOOL = false DOXYGEN = /usr/bin/doxygen DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E ETAGS = etags EXEEXT = FGREP = /usr/bin/grep -F FILECMD = file GREP = /usr/bin/grep INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LD = /usr/bin/ld -m elf_x86_64 LDFLAGS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LIPO = LN_S = ln -s LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAKEINFO = ${SHELL} '/build/coverity/source-Osmocom/libusrp/missing' makeinfo MANIFEST_TOOL = : MKDIR_P = /usr/bin/mkdir -p NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = libusrp PACKAGE_BUGREPORT = openbsc@lists.osmocom.org PACKAGE_NAME = libusrp PACKAGE_STRING = libusrp 3.4.9.1-7530 PACKAGE_TARNAME = libusrp PACKAGE_URL = PACKAGE_VERSION = 3.4.9.1-7530 PATH_SEPARATOR = : PKG_CONFIG = /usr/bin/pkg-config PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = /build/coverity/install-Osmocom/lib/pkgconfig PYTHON = /usr/bin/python3 PYTHON_EXEC_PREFIX = ${exec_prefix} PYTHON_PLATFORM = linux PYTHON_PREFIX = ${prefix} PYTHON_VERSION = 3.11 RANLIB = ranlib RELMAKE = -include osmo-release.mk SED = /usr/bin/sed SET_MAKE = SHELL = /bin/bash STRIP = strip USB_CFLAGS = -I/usr/include/libusb-1.0 USB_LIBS = -lusb-1.0 VERSION = 3.4.9.1-7530 XAS = sdas8051 -plosgff XCC = sdcc -mmcs51 --no-xinit-opt XMLTO = abs_builddir = /build/coverity/source-Osmocom/libusrp/host/swig abs_srcdir = /build/coverity/source-Osmocom/libusrp/host/swig abs_top_builddir = /build/coverity/source-Osmocom/libusrp abs_top_srcdir = /build/coverity/source-Osmocom/libusrp ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = $${TAR-tar} chof - "$$tardir" am__untar = $${TAR-tar} xf - bindir = ${exec_prefix}/bin build = x86_64-pc-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-pc-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /build/coverity/source-Osmocom/libusrp/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} pkgpyexecdir = ${pyexecdir}/libusrp pkgpythondir = ${pythondir}/libusrp prefix = /build/coverity/install-Osmocom program_transform_name = s,x,x, psdir = ${docdir} pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python3.11/site-packages pythondir = ${PYTHON_PREFIX}/lib/python3.11/site-packages runstatedir = ${localstatedir}/run sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_build_prefix = ../../ top_builddir = ../.. top_srcdir = ../.. # Every Makefile starts with common vars so we can # consistently use += # N.B. Only $(swig_built_sources), not $(swig_all_built_sources) BUILT_SOURCES = $(swig_built_sources) CLEANFILES = guile.log $(swig_all_built_sources) python/*.lo \ python/*.o python/*.d guile/*.lo guile/*.o guile/*.d DISTCLEANFILES = EXTRA_DIST = STAMPS = #AM_CFLAGS = @autoconf_default_CFLAGS@ @lf_CFLAGS@ #AM_CXXFLAGS = @autoconf_default_CXXFLAGS@ @lf_CXXFLAGS@ # This is _NOT_ the library release version, it's an API version. # Please read chapter "Library interface versions" of the libtool documentation # before making any modifications: https://www.gnu.org/software/libtool/manual/html_node/Versioning.html LIBVERSION = 1:0:0 # Sets ABI version in SONAME and appends -LIBVER to filename LTVERSIONFLAGS = -version-info $(LIBVERSION) # includes grincludedir = $(includedir)/gnuradio # swig includes swigincludedir = $(grincludedir)/swig # Guile scheme code ends up under here: guiledir = $(prefix)/share/guile/site # Install the gnuradio stuff in the appropriate subdirectory # This usually ends up at: # ${prefix}/lib/python${python_version}/site-packages/gnuradio grpythondir = $(pythondir)/gnuradio grpyexecdir = $(pyexecdir)/gnuradio # Install the non-gnuradio usrp stuff in the appropriate subdirectory # This usually ends up at: # ${prefix}/lib/python${python_version}/site-packages/usrpm usrppythondir = $(pythondir)/usrpm usrppyexecdir = $(pyexecdir)/usrpm # gcell includes gcellincludedir = $(includedir)/gcell gcellspuincludedir = $(includedir)/gcell/spu # Cell spu libs libspudir = $(libdir)spu # This used to be set in configure.ac but is now defined here for all # Makefiles when this fragment is included. STD_DEFINES_AND_INCLUDES = $(DEFINES) $(GNURADIO_INCLUDES) \ $(GRUEL_INCLUDES) $(VOLK_INCLUDES) $(BOOST_CPPFLAGS) # when including for compilation from pre-installed libraries and such, # need to make sure those are put last on the compile command WITH_INCLUDES = #@with_INCLUDES@ WITH_SWIG_INCLUDES = @with_SWIG_INCLUDES@ # Where to find gnuradio include files in the current build tree # top_srcdir for original stuff, top_builddir for generated files GNURADIO_INCLUDES = @gnuradio_core_INCLUDES@ # How to link in GNU Radio core library from inside the tree GNURADIO_CORE_LA = @gnuradio_core_LA@ # How to link in the GRUEL library from inside the tree GRUEL_INCLUDES = @gruel_INCLUDES@ GRUEL_LA = @gruel_LA@ # How to link in the VOLK library from inside the tree VOLK_INCLUDES = @volk_INCLUDES@ VOLK_LA = @volk_LA@ # How to link in the USRP library from inside the tree USRP_INCLUDES = \ -I$(top_srcdir)/host/include \ -I$(top_builddir)/host/include \ -I$(top_srcdir)/firmware/include \ $(NULL) USRP_LA = $(top_builddir)/host/lib/libusrp.la # How to link the gcell library from inside the tree (the PPU part) GCELL_INCLUDES = @gcell_INCLUDES@ GCELL_LA = @gcell_LA@ # How to link the gcell library from inside the tree (the SPU part) GCELL_SPU_INCLUDES = @gcell_spu_INCLUDES@ GCELL_SPU_LA = @gcell_spu_LA@ # libtool aware wrapper for ppu-embedspu GCELL_EMBEDSPU_LIBTOOL = ../../gcell/lib/runtime/gcell-embedspu-libtool # Fix for BSD make not defining $(RM). We define it now in configure.ac # using AM_PATH_PROG, but now here have to add a -f to be like GNU make RM = $(RM_PROG) -f RUN_GUILE = GUILE_LOAD_PATH="../../gruel/src/scheme" @GUILE@ -e main -s # Base directory for example applications exampledir = $(datadir)/gnuradio/examples gr_docdir = $(docdir)-$(DOCVER) # System configuration files gr_prefsdir = $(GR_PREFSDIR) # Data directory for grc block wrappers grc_blocksdir = $(pkgdatadir)/grc/blocks # Other common defines; use "+=" to add to these MOSTLYCLEANFILES = $(BUILT_SOURCES) $(STAMPS) *.pyc *.pyo *~ *.tmp *.loT \ .unittests/* .unittests/python/* SWIG_PYTHON_FLAGS = \ -fvirtual \ -python \ -modern \ -keyword \ -w511 \ -outdir . STD_SWIG_PYTHON_ARGS = \ $(SWIG_PYTHON_FLAGS) \ $(STD_DEFINES_AND_INCLUDES) \ $(WITH_SWIG_INCLUDES) \ $(WITH_INCLUDES) # NOTE: -Linkage passive and -Linkage module don't define SWIG_init() SWIG_GUILE_FLAGS = \ -guile \ -scm \ -scmstub \ -package gnuradio \ -Linkage module \ -proxy \ -goopsprefix gr: \ -emit-slot-accessors \ -emit-setters \ -outdir . STD_SWIG_GUILE_ARGS = \ $(SWIG_GUILE_FLAGS) \ $(STD_DEFINES_AND_INCLUDES) \ $(WITH_SWIG_INCLUDES) \ $(WITH_INCLUDES) STD_SWIG_LA_LD_FLAGS = \ $(PYTHON_LDFLAGS) \ -module \ -avoid-version \ $(NO_UNDEFINED) STD_SWIG_LA_LIB_ADD = -lstdc++ STD_SWIG_CXX_FLAGS = @swig_CXXFLAGS@ # We drive the dependencies off of swig_built_sources. This variable # ends up containing only the generated .py and/or .scm files, not the .h # or .cc files. This allows us to use the pattern rules defined # below to generate all the pieces without the parallel make # problems that occur when both the .py's and .cc's are in swig_built_sources. swig_built_sources = $(am__append_1) $(am__append_3) # swig_all_built_sources contains swig_built_sources plus the .cc and .h files. # It contains the files to remove from the distribution and the files to # remove for make clean. swig_all_built_sources = $(am__append_2) $(am__append_4) # Create a list of .py files based on the top level .i files. #PYTHON_GEN = $(foreach IFILE,$(TOP_SWIG_IFILES), $(subst .i,.py,$(IFILE))) # Create a list of .scm files based on the top level .i files. #GUILE_GEN = $(foreach IFILE,$(TOP_SWIG_IFILES), $(patsubst %.i,gnuradio/%.scm,$(IFILE))) # Don't distribute any of the swig generated files no_dist_files = $(swig_all_built_sources) SUFFIXES = .i .scm .py AM_CPPFLAGS = \ $(USRP_INCLUDES) \ -I$(srcdir) \ $(PYTHON_CPPFLAGS) \ $(USB_INCLUDES) \ $(WITH_INCLUDES) ################################# # SWIG interface and library TOP_SWIG_IFILES = \ usrp_prims.i # Install so that they end up available as: # import usrpm.usrp_prims # This ends up at: # ${prefix}/lib/python${python_version}/site-packages/usrpm usrp_prims_pythondir_category = \ usrpm # additional arguments to the SWIG command usrp_prims_swig_args = \ $(USRP_INCLUDES) # additional libraries for linking with the SWIG-generated library usrp_prims_la_swig_libadd = \ $(USRP_LA) # additional Python files to be installed along with the SWIG-generated one usrp_prims_python = \ __init__.py \ usrp_fpga_regs.py all: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) all-am .SUFFIXES: .SUFFIXES: .i .scm .py $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig $(srcdir)/Makefile.swig.gen $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign host/swig/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign host/swig/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_srcdir)/Makefile.common $(top_srcdir)/Makefile.swig $(srcdir)/Makefile.swig.gen $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-am all-am: Makefile installdirs: install: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-am install-exec: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES) clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) clean: clean-am clean-am: clean-generic clean-libtool mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: .MAKE: all check install install-am install-exec install-strip .PHONY: all all-am check check-am clean clean-generic clean-libtool \ cscopelist-am ctags-am distclean distclean-generic \ distclean-libtool distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am .PRECIOUS: Makefile # Base directory for documentation (docdir undefined in autoconf < 1.60) docdir ?= $(datadir)/doc/$(PACKAGE) # Compile a .i to what guile needs. We use -o to set the output file name, # or even with -outdir guile in SWIG_GUILE_ARGS, swig keeps putting a # gnuradio_core_*_wrap.cxx in the source directory. gnuradio/%.scm : %.i @echo "Compile .i to .scm" @test -d "guile" || $(mkinstalldirs) "guile" @test -d "gnuradio" || $(mkinstalldirs) "gnuradio" $(SWIG) $(STD_SWIG_GUILE_ARGS) $($*_swig_args) \ -MD -MF guile/$*.Std \ -module $* -o guile/$*.cc $< $(SED) -e 's|guile/\(.*\)\.cc:|gnuradio/\1.scm:|' guile/$*.Std > guile/$*.d $(SED) -i -e 's/<--dummy-[0-9]\+-->//g' gnuradio/$*.scm $(SED) -i -e 's/^(export /(export-safely /' gnuradio/$*.scm $(RM) guile/$*.Std # Compile a .i file to what python needs .i.py: @echo "Compile .i to .py" @test -d "python" || $(mkinstalldirs) "python" $(SWIG) $(STD_SWIG_PYTHON_ARGS) $($*_swig_args) \ -MD -MF python/$*.Std \ -module $* -o python/$*.cc -oh python/$*.h $< $(SED) -e 's|python/\(.*\)\.cc:|\1.py:|' python/$*.Std > python/$*.d $(RM) python/$*.Std generate-makefile-swig $(srcdir)/Makefile.swig.genX: $(top_srcdir)/Makefile.swig.gen.t @do_recreate=0; \ if test -f $(srcdir)/Makefile.swig.gen; then \ if $(RM) $(srcdir)/Makefile.swig.gen 2>/dev/null; then \ if touch $(srcdir)/Makefile.swig.gen 2>/dev/null; then \ do_recreate=1; \ fi; \ fi; \ else \ if touch $(srcdir)/Makefile.swig.gen 2>/dev/null; then \ do_recreate=1; \ fi; \ fi; \ if test "$$do_recreate" == "1"; then \ echo "Regenerating $(srcdir)/Makefile.swig.gen"; \ for TFILE in $(TOP_SWIG_IFILES); do \ TNAME=`python -c "import os.path as op; (dN, fN) = op.split ('$$TFILE'); (fbN, fE) = op.splitext (fN); print fbN;"`; \ $(SED) -e 's|@NAME@|'$$TNAME'|g;' < $(top_srcdir)/Makefile.swig.gen.t >> $(srcdir)/Makefile.swig.gen; \ echo "" >> $(srcdir)/Makefile.swig.gen; \ done; \ else \ echo "Cannot recreate $(srcdir)/Makefile.swig.gen because the directory or file is write-protected."; \ exit -1; \ fi; # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: