// SPDX-License-Identifier: GPL-2.0-or-later /* Copyright (c) 1998 - 2002 Frodo Looijaard and Philip Edelbrock */ /* Supports: Intel PIIX4, 440MX Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 AMD Hudson-2, ML, CZ Hygon CZ SMSC Victory66 Note: we assume there can only be one device, with one or more SMBus interfaces. The device can register multiple i2c_adapters (up to PIIX4_MAX_ADAPTERS). For devices supporting multiple ports the i2c_adapter should provide an i2c_algorithm to access them. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "i2c-piix4.h" /* count for request_region */ #define SMBIOSIZE 9 /* PCI Address Constants */ #define SMBBA 0x090 #define SMBHSTCFG 0x0D2 #define SMBSLVC 0x0D3 #define SMBSHDW1 0x0D4 #define SMBSHDW2 0x0D5 #define SMBREV 0x0D6 /* Other settings */ #define MAX_TIMEOUT 500 #define ENABLE_INT9 0 /* PIIX4 constants */ #define PIIX4_QUICK 0x00 #define PIIX4_BYTE 0x04 #define PIIX4_BYTE_DATA 0x08 #define PIIX4_WORD_DATA 0x0C /* Multi-port constants */ #define PIIX4_MAX_ADAPTERS 4 #define HUDSON2_MAIN_PORTS 2 /* HUDSON2, KERNCZ reserves ports 3, 4 */ /* SB800 constants */ #define SB800_PIIX4_SMB_IDX 0xcd6 #define SB800_PIIX4_SMB_MAP_SIZE 2 #define KERNCZ_IMC_IDX 0x3e #define KERNCZ_IMC_DATA 0x3f /* * SB800 port is selected by bits 2:1 of the smb_en register (0x2c) * or the smb_sel register (0x2e), depending on bit 0 of register 0x2f. * Hudson-2/Bolton port is always selected by bits 2:1 of register 0x2f. */ #define SB800_PIIX4_PORT_IDX 0x2c #define SB800_PIIX4_PORT_IDX_ALT 0x2e #define SB800_PIIX4_PORT_IDX_SEL 0x2f #define SB800_PIIX4_PORT_IDX_MASK 0x06 #define SB800_PIIX4_PORT_IDX_SHIFT 1 /* On kerncz and Hudson2, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */ #define SB800_PIIX4_PORT_IDX_KERNCZ 0x02 #define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18 #define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3 #define SB800_PIIX4_FCH_PM_ADDR 0xFED80300 #define SB800_PIIX4_FCH_PM_SIZE 8 #define SB800_ASF_ACPI_PATH "\\_SB.ASFC" /* insmod parameters */ /* If force is set to anything different from 0, we forcibly enable the PIIX4. DANGEROUS! */ static int force; module_param (force, int, 0); MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); /* If force_addr is set to anything different from 0, we forcibly enable the PIIX4 at the given address. VERY DANGEROUS! */ static int force_addr; module_param_hw(force_addr, int, ioport, 0); MODULE_PARM_DESC(force_addr, "Forcibly enable the PIIX4 at the given address. " "EXTREMELY DANGEROUS!"); static int srvrworks_csb5_delay; static struct pci_driver piix4_driver; static const struct dmi_system_id piix4_dmi_blacklist[] = { { .ident = "Sapphire AM2RD790", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."), DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"), }, }, { .ident = "DFI Lanparty UT 790FX", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."), DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"), }, }, { } }; /* The IBM entry is in a separate table because we only check it on Intel-based systems */ static const struct dmi_system_id piix4_dmi_ibm[] = { { .ident = "IBM", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, }, { } }; /* * SB800 globals */ static u8 piix4_port_sel_sb800; static u8 piix4_port_mask_sb800; static u8 piix4_port_shift_sb800; static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = { " port 0", " port 2", " port 3", " port 4" }; static const char *piix4_aux_port_name_sb800 = " port 1"; struct i2c_piix4_adapdata { unsigned short smba; /* SB800 */ bool sb800_main; bool notify_imc; u8 port; /* Port number, shifted */ struct sb800_mmio_cfg mmio_cfg; }; int piix4_sb800_region_request(struct device *dev, struct sb800_mmio_cfg *mmio_cfg) { if (mmio_cfg->use_mmio) { void __iomem *addr; if (!request_mem_region_muxed(SB800_PIIX4_FCH_PM_ADDR, SB800_PIIX4_FCH_PM_SIZE, "sb800_piix4_smb")) { dev_err(dev, "SMBus base address memory region 0x%x already in use.\n", SB800_PIIX4_FCH_PM_ADDR); return -EBUSY; } addr = ioremap(SB800_PIIX4_FCH_PM_ADDR, SB800_PIIX4_FCH_PM_SIZE); if (!addr) { release_mem_region(SB800_PIIX4_FCH_PM_ADDR, SB800_PIIX4_FCH_PM_SIZE); dev_err(dev, "SMBus base address mapping failed.\n"); return -ENOMEM; } mmio_cfg->addr = addr; return 0; } if (!request_muxed_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE, "sb800_piix4_smb")) { dev_err(dev, "SMBus base address index region 0x%x already in use.\n", SB800_PIIX4_SMB_IDX); return -EBUSY; } return 0; } EXPORT_SYMBOL_NS_GPL(piix4_sb800_region_request, "PIIX4_SMBUS"); void piix4_sb800_region_release(struct device *dev, struct sb800_mmio_cfg *mmio_cfg) { if (mmio_cfg->use_mmio) { iounmap(mmio_cfg->addr); release_mem_region(SB800_PIIX4_FCH_PM_ADDR, SB800_PIIX4_FCH_PM_SIZE); return; } release_region(SB800_PIIX4_SMB_IDX, SB800_PIIX4_SMB_MAP_SIZE); } EXPORT_SYMBOL_NS_GPL(piix4_sb800_region_release, "PIIX4_SMBUS"); static bool piix4_sb800_use_mmio(struct pci_dev *PIIX4_dev) { /* * cd6h/cd7h port I/O accesses can be disabled on AMD processors * w/ SMBus PCI revision ID 0x51 or greater. MMIO is supported on * the same processors and is the recommended access method. */ return (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS && PIIX4_dev->revision >= 0x51); } static int piix4_setup(struct pci_dev *PIIX4_dev, const struct pci_device_id *id) { unsigned char temp; unsigned short piix4_smba; if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) srvrworks_csb5_delay = 1; /* On some motherboards, it was reported that accessing the SMBus caused severe hardware problems */ if (dmi_check_system(piix4_dmi_blacklist)) { dev_err(&PIIX4_dev->dev, "Accessing the SMBus on this system is unsafe!\n"); return -EPERM; } /* Don't access SMBus on IBM systems which get corrupted eeproms */ if (dmi_check_system(piix4_dmi_ibm) && PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { dev_err(&PIIX4_dev->dev, "IBM system detected; this module " "may corrupt your serial eeprom! Refusing to load " "module!\n"); return -EPERM; } /* Determine the address of the SMBus areas */ if (force_addr) { piix4_smba = force_addr & 0xfff0; force = 0; } else { pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); piix4_smba &= 0xfff0; if(piix4_smba == 0) { dev_err(&PIIX4_dev->dev, "SMBus base address " "uninitialized - upgrade BIOS or use " "force_addr=0xaddr\n"); return -ENODEV; } } if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", piix4_smba); return -EBUSY; } pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); /* If force_addr is set, we program the new address here. Just to make sure, we disable the PIIX4 first. */ if (force_addr) { pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " "new address %04x!\n", piix4_smba); } else if ((temp & 1) == 0) { if (force) { /* This should never need to be done, but has been * noted that many Dell machines have the SMBus * interface on the PIIX4 disabled!? NOTE: This assumes * I/O space and other allocations WERE done by the * Bios! Don't complain if your hardware does weird * things after enabling this. :') Check for Bios * updates before resorting to this. */ pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 1); dev_notice(&PIIX4_dev->dev, "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n"); } else { dev_err(&PIIX4_dev->dev, "SMBus Host Controller not enabled!\n"); release_region(piix4_smba, SMBIOSIZE); return -ENODEV; } } if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2)) dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); else if ((temp & 0x0E) == 0) dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); else dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " "(or code out of date)!\n"); pci_read_config_byte(PIIX4_dev, SMBREV, &temp); dev_info(&PIIX4_dev->dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, temp); return piix4_smba; } static int piix4_setup_sb800_smba(struct pci_dev *PIIX4_dev, u8 smb_en, u8 aux, u8 *smb_en_status, unsigned short *piix4_smba) { struct sb800_mmio_cfg mmio_cfg; u8 smba_en_lo; u8 smba_en_hi; int retval; mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev); retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg); if (retval) return retval; if (mmio_cfg.use_mmio) { smba_en_lo = ioread8(mmio_cfg.addr); smba_en_hi = ioread8(mmio_cfg.addr + 1); } else { outb_p(smb_en, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); outb_p(smb_en + 1, SB800_PIIX4_SMB_IDX); smba_en_hi = inb_p(SB800_PIIX4_SMB_IDX + 1); } piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg); if (!smb_en) { *smb_en_status = smba_en_lo & 0x10; *piix4_smba = smba_en_hi << 8; if (aux) *piix4_smba |= 0x20; } else { *smb_en_status = smba_en_lo & 0x01; *piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; } if (!*smb_en_status) { dev_err(&PIIX4_dev->dev, "SMBus Host Controller not enabled!\n"); return -ENODEV; } return 0; } static int piix4_setup_sb800(struct pci_dev *PIIX4_dev, const struct pci_device_id *id, u8 aux) { unsigned short piix4_smba; u8 smb_en, smb_en_status, port_sel; u8 i2ccfg, i2ccfg_offset = 0x10; struct sb800_mmio_cfg mmio_cfg; int retval; /* SB800 and later SMBus does not support forcing address */ if (force || force_addr) { dev_err(&PIIX4_dev->dev, "SMBus does not support " "forcing address!\n"); return -EINVAL; } /* Determine the address of the SMBus areas */ if ((PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && PIIX4_dev->revision >= 0x41) || (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD && PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS && PIIX4_dev->revision >= 0x49) || (PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON && PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) smb_en = 0x00; else smb_en = (aux) ? 0x28 : 0x2c; retval = piix4_setup_sb800_smba(PIIX4_dev, smb_en, aux, &smb_en_status, &piix4_smba); if (retval) return retval; if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", piix4_smba); return -EBUSY; } /* Aux SMBus does not support IRQ information */ if (aux) { dev_info(&PIIX4_dev->dev, "Auxiliary SMBus Host Controller at 0x%x\n", piix4_smba); return piix4_smba; } /* Request the SMBus I2C bus config region */ if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " "0x%x already in use!\n", piix4_smba + i2ccfg_offset); release_region(piix4_smba, SMBIOSIZE); return -EBUSY; } i2ccfg = inb_p(piix4_smba + i2ccfg_offset); release_region(piix4_smba + i2ccfg_offset, 1); if (i2ccfg & 1) dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus\n"); else dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus\n"); dev_info(&PIIX4_dev->dev, "SMBus Host Controller at 0x%x, revision %d\n", piix4_smba, i2ccfg >> 4); /* Find which register is used for port selection */ if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD || PIIX4_dev->vendor == PCI_VENDOR_ID_HYGON) { if (PIIX4_dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || (PIIX4_dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && PIIX4_dev->revision >= 0x1F)) { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ; } else { piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; } } else { mmio_cfg.use_mmio = piix4_sb800_use_mmio(PIIX4_dev); retval = piix4_sb800_region_request(&PIIX4_dev->dev, &mmio_cfg); if (retval) { release_region(piix4_smba, SMBIOSIZE); return retval; } outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX); port_sel = inb_p(SB800_PIIX4_SMB_IDX + 1); piix4_port_sel_sb800 = (port_sel & 0x01) ? SB800_PIIX4_PORT_IDX_ALT : SB800_PIIX4_PORT_IDX; piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK; piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT; piix4_sb800_region_release(&PIIX4_dev->dev, &mmio_cfg); } dev_info(&PIIX4_dev->dev, "Using register 0x%02x for SMBus port selection\n", (unsigned int)piix4_port_sel_sb800); return piix4_smba; } static int piix4_setup_aux(struct pci_dev *PIIX4_dev, const struct pci_device_id *id, unsigned short base_reg_addr) { /* Set up auxiliary SMBus controllers found on some * AMD chipsets e.g. SP5100 (SB700 derivative) */ unsigned short piix4_smba; /* Read address of auxiliary SMBus controller */ pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); if ((piix4_smba & 1) == 0) { dev_dbg(&PIIX4_dev->dev, "Auxiliary SMBus controller not enabled\n"); return -ENODEV; } piix4_smba &= 0xfff0; if (piix4_smba == 0) { dev_dbg(&PIIX4_dev->dev, "Auxiliary SMBus base address uninitialized\n"); return -ENODEV; } if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) return -ENODEV; if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " "already in use!\n", piix4_smba); return -EBUSY; } dev_info(&PIIX4_dev->dev, "Auxiliary SMBus Host Controller at 0x%x\n", piix4_smba); return piix4_smba; } int piix4_transaction(struct i2c_adapter *piix4_adapter, unsigned short piix4_smba) { int temp; int result = 0; int timeout = 0; dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); /* Make sure the SMBus host is ready to start transmitting */ if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " "Resetting...\n", temp); outb_p(temp, SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); return -EBUSY; } else { dev_dbg(&piix4_adapter->dev, "Successful!\n"); } } /* start the transaction by setting bit 6 */ outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */ usleep_range(2000, 2100); else usleep_range(250, 500); while ((++timeout < MAX_TIMEOUT) && ((temp = inb_p(SMBHSTSTS)) & 0x01)) usleep_range(250, 500); /* If the SMBus is still busy, we give up */ if (timeout == MAX_TIMEOUT) { dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } if (temp & 0x10) { result = -EIO; dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); } if (temp & 0x08) { result = -EIO; dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " "locked until next hard reset. (sorry!)\n"); /* Clock stops and target is stuck in mid-transmission */ } if (temp & 0x04) { result = -ENXIO; dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); } if (inb_p(SMBHSTSTS) != 0x00) outb_p(inb(SMBHSTSTS), SMBHSTSTS); if ((temp = inb_p(SMBHSTSTS)) != 0x00) { dev_err(&piix4_adapter->dev, "Failed reset at end of " "transaction (%02x)\n", temp); } dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); return result; } EXPORT_SYMBOL_NS_GPL(piix4_transaction, "PIIX4_SMBUS"); /* Return negative errno on error. */ static s32 piix4_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data * data) { struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); unsigned short piix4_smba = adapdata->smba; int i, len; int status; switch (size) { case I2C_SMBUS_QUICK: outb_p((addr << 1) | read_write, SMBHSTADD); size = PIIX4_QUICK; break; case I2C_SMBUS_BYTE: outb_p((addr << 1) | read_write, SMBHSTADD); if (read_write == I2C_SMBUS_WRITE) outb_p(command, SMBHSTCMD); size = PIIX4_BYTE; break; case I2C_SMBUS_BYTE_DATA: outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) outb_p(data->byte, SMBHSTDAT0); size = PIIX4_BYTE_DATA; break; case I2C_SMBUS_WORD_DATA: outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { outb_p(data->word & 0xff, SMBHSTDAT0); outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); } size = PIIX4_WORD_DATA; break; case I2C_SMBUS_BLOCK_DATA: outb_p((addr << 1) | read_write, SMBHSTADD); outb_p(command, SMBHSTCMD); if (read_write == I2C_SMBUS_WRITE) { len = data->block[0]; if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) return -EINVAL; outb_p(len, SMBHSTDAT0); inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= len; i++) outb_p(data->block[i], SMBBLKDAT); } size = PIIX4_BLOCK_DATA; break; default: dev_warn(&adap->dev, "Unsupported transaction %d\n", size); return -EOPNOTSUPP; } outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); status = piix4_transaction(adap, piix4_smba); if (status) return status; if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) return 0; switch (size) { case PIIX4_BYTE: case PIIX4_BYTE_DATA: data->byte = inb_p(SMBHSTDAT0); break; case PIIX4_WORD_DATA: data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); break; case PIIX4_BLOCK_DATA: data->block[0] = inb_p(SMBHSTDAT0); if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) return -EPROTO; inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ for (i = 1; i <= data->block[0]; i++) data->block[i] = inb_p(SMBBLKDAT); break; } return 0; } static uint8_t piix4_imc_read(uint8_t idx) { outb_p(idx, KERNCZ_IMC_IDX); return inb_p(KERNCZ_IMC_DATA); } static void piix4_imc_write(uint8_t idx, uint8_t value) { outb_p(idx, KERNCZ_IMC_IDX); outb_p(value, KERNCZ_IMC_DATA); } static int piix4_imc_sleep(void) { int timeout = MAX_TIMEOUT; if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc")) return -EBUSY; /* clear response register */ piix4_imc_write(0x82, 0x00); /* request ownership flag */ piix4_imc_write(0x83, 0xB4); /* kick off IMC Mailbox command 96 */ piix4_imc_write(0x80, 0x96); while (timeout--) { if (piix4_imc_read(0x82) == 0xfa) { release_region(KERNCZ_IMC_IDX, 2); return 0; } usleep_range(1000, 2000); } release_region(KERNCZ_IMC_IDX, 2); return -ETIMEDOUT; } static void piix4_imc_wakeup(void) { int timeout = MAX_TIMEOUT; if (!request_muxed_region(KERNCZ_IMC_IDX, 2, "smbus_kerncz_imc")) return; /* clear response register */ piix4_imc_write(0x82, 0x00); /* release ownership flag */ piix4_imc_write(0x83, 0xB5); /* kick off IMC Mailbox command 96 */ piix4_imc_write(0x80, 0x96); while (timeout--) { if (piix4_imc_read(0x82) == 0xfa) break; usleep_range(1000, 2000); } release_region(KERNCZ_IMC_IDX, 2); } int piix4_sb800_port_sel(u8 port, struct sb800_mmio_cfg *mmio_cfg) { u8 smba_en_lo, val; if (mmio_cfg->use_mmio) { smba_en_lo = ioread8(mmio_cfg->addr + piix4_port_sel_sb800); val = (smba_en_lo & ~piix4_port_mask_sb800) | port; if (smba_en_lo != val) iowrite8(val, mmio_cfg->addr + piix4_port_sel_sb800); return (smba_en_lo & piix4_port_mask_sb800); } outb_p(piix4_port_sel_sb800, SB800_PIIX4_SMB_IDX); smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1); val = (smba_en_lo & ~piix4_port_mask_sb800) | port; if (smba_en_lo != val) outb_p(val, SB800_PIIX4_SMB_IDX + 1); return (smba_en_lo & piix4_port_mask_sb800); } EXPORT_SYMBOL_NS_GPL(piix4_sb800_port_sel, "PIIX4_SMBUS"); /* * Handles access to multiple SMBus ports on the SB800. * The port is selected by bits 2:1 of the smb_en register (0x2c). * Returns negative errno on error. * * Note: The selected port must be returned to the initial selection to avoid * problems on certain systems. */ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr, unsigned short flags, char read_write, u8 command, int size, union i2c_smbus_data *data) { struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); unsigned short piix4_smba = adapdata->smba; int retries = MAX_TIMEOUT; int smbslvcnt; u8 prev_port; int retval; retval = piix4_sb800_region_request(&adap->dev, &adapdata->mmio_cfg); if (retval) return retval; /* Request the SMBUS semaphore, avoid conflicts with the IMC */ smbslvcnt = inb_p(SMBSLVCNT); do { outb_p(smbslvcnt | 0x10, SMBSLVCNT); /* Check the semaphore status */ smbslvcnt = inb_p(SMBSLVCNT); if (smbslvcnt & 0x10) break; usleep_range(1000, 2000); } while (--retries); /* SMBus is still owned by the IMC, we give up */ if (!retries) { retval = -EBUSY; goto release; } /* * Notify the IMC (Integrated Micro Controller) if required. * Among other responsibilities, the IMC is in charge of monitoring * the System fans and temperature sensors, and act accordingly. * All this is done through SMBus and can/will collide * with our transactions if they are long (BLOCK_DATA). * Therefore we need to request the ownership flag during those * transactions. */ if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) { int ret; ret = piix4_imc_sleep(); switch (ret) { case -EBUSY: dev_warn(&adap->dev, "IMC base address index region 0x%x already in use.\n", KERNCZ_IMC_IDX); break; case -ETIMEDOUT: dev_warn(&adap->dev, "Failed to communicate with the IMC.\n"); break; default: break; } /* If IMC communication fails do not retry */ if (ret) { dev_warn(&adap->dev, "Continuing without IMC notification.\n"); adapdata->notify_imc = false; } } prev_port = piix4_sb800_port_sel(adapdata->port, &adapdata->mmio_cfg); retval = piix4_access(adap, addr, flags, read_write, command, size, data); piix4_sb800_port_sel(prev_port, &adapdata->mmio_cfg); /* Release the semaphore */ outb_p(smbslvcnt | 0x20, SMBSLVCNT); if ((size == I2C_SMBUS_BLOCK_DATA) && adapdata->notify_imc) piix4_imc_wakeup(); release: piix4_sb800_region_release(&adap->dev, &adapdata->mmio_cfg); return retval; } static u32 piix4_func(struct i2c_adapter *adapter) { return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA; } static const struct i2c_algorithm smbus_algorithm = { .smbus_xfer = piix4_access, .functionality = piix4_func, }; static const struct i2c_algorithm piix4_smbus_algorithm_sb800 = { .smbus_xfer = piix4_access_sb800, .functionality = piix4_func, }; static const struct pci_device_id piix4_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_HYGON, PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, { 0, } }; MODULE_DEVICE_TABLE (pci, piix4_ids); static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS]; static struct i2c_adapter *piix4_aux_adapter; static int piix4_adapter_count; static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba, bool sb800_main, u8 port, bool notify_imc, u8 hw_port_nr, const char *name, struct i2c_adapter **padap) { struct i2c_adapter *adap; struct i2c_piix4_adapdata *adapdata; int retval; adap = kzalloc(sizeof(*adap), GFP_KERNEL); if (adap == NULL) { release_region(smba, SMBIOSIZE); return -ENOMEM; } adap->owner = THIS_MODULE; adap->class = I2C_CLASS_HWMON; adap->algo = sb800_main ? &piix4_smbus_algorithm_sb800 : &smbus_algorithm; adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); if (adapdata == NULL) { kfree(adap); release_region(smba, SMBIOSIZE); return -ENOMEM; } adapdata->mmio_cfg.use_mmio = piix4_sb800_use_mmio(dev); adapdata->smba = smba; adapdata->sb800_main = sb800_main; adapdata->port = port << piix4_port_shift_sb800; adapdata->notify_imc = notify_imc; /* set up the sysfs linkage to our parent device */ adap->dev.parent = &dev->dev; if (has_acpi_companion(&dev->dev)) { acpi_preset_companion(&adap->dev, ACPI_COMPANION(&dev->dev), hw_port_nr); } snprintf(adap->name, sizeof(adap->name), "SMBus PIIX4 adapter%s at %04x", name, smba); i2c_set_adapdata(adap, adapdata); retval = i2c_add_adapter(adap); if (retval) { kfree(adapdata); kfree(adap); release_region(smba, SMBIOSIZE); return retval; } /* * The AUX bus can not be probed as on some platforms it reports all * devices present and all reads return "0". * This would allow the ee1004 to be probed incorrectly. */ if (port == 0) i2c_register_spd(adap); *padap = adap; return 0; } static int piix4_add_adapters_sb800(struct pci_dev *dev, unsigned short smba, bool notify_imc) { struct i2c_piix4_adapdata *adapdata; int port; int retval; if (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS || (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS && dev->revision >= 0x1F)) { piix4_adapter_count = HUDSON2_MAIN_PORTS; } else { piix4_adapter_count = PIIX4_MAX_ADAPTERS; } for (port = 0; port < piix4_adapter_count; port++) { u8 hw_port_nr = port == 0 ? 0 : port + 1; retval = piix4_add_adapter(dev, smba, true, port, notify_imc, hw_port_nr, piix4_main_port_names_sb800[port], &piix4_main_adapters[port]); if (retval < 0) goto error; } return retval; error: dev_err(&dev->dev, "Error setting up SB800 adapters. Unregistering!\n"); while (--port >= 0) { adapdata = i2c_get_adapdata(piix4_main_adapters[port]); if (adapdata->smba) { i2c_del_adapter(piix4_main_adapters[port]); kfree(adapdata); kfree(piix4_main_adapters[port]); piix4_main_adapters[port] = NULL; } } return retval; } static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id) { int retval; bool is_sb800 = false; bool is_asf = false; acpi_status status; acpi_handle handle; if ((dev->vendor == PCI_VENDOR_ID_ATI && dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && dev->revision >= 0x40) || dev->vendor == PCI_VENDOR_ID_AMD || dev->vendor == PCI_VENDOR_ID_HYGON) { bool notify_imc = false; is_sb800 = true; if ((dev->vendor == PCI_VENDOR_ID_AMD || dev->vendor == PCI_VENDOR_ID_HYGON) && dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS) { u8 imc; /* * Detect if IMC is active or not, this method is * described on coreboot's AMD IMC notes */ pci_bus_read_config_byte(dev->bus, PCI_DEVFN(0x14, 3), 0x40, &imc); if (imc & 0x80) notify_imc = true; } /* base address location etc changed in SB800 */ retval = piix4_setup_sb800(dev, id, 0); if (retval < 0) return retval; /* * Try to register multiplexed main SMBus adapter, * give up if we can't */ retval = piix4_add_adapters_sb800(dev, retval, notify_imc); if (retval < 0) return retval; } else { retval = piix4_setup(dev, id); if (retval < 0) return retval; /* Try to register main SMBus adapter, give up if we can't */ retval = piix4_add_adapter(dev, retval, false, 0, false, 0, "", &piix4_main_adapters[0]); if (retval < 0) return retval; piix4_adapter_count = 1; } /* Check for auxiliary SMBus on some AMD chipsets */ retval = -ENODEV; if (dev->vendor == PCI_VENDOR_ID_ATI && dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) { if (dev->revision < 0x40) { retval = piix4_setup_aux(dev, id, 0x58); } else { /* SB800 added aux bus too */ retval = piix4_setup_sb800(dev, id, 1); } } status = acpi_get_handle(NULL, (acpi_string)SB800_ASF_ACPI_PATH, &handle); if (ACPI_SUCCESS(status)) is_asf = true; if (dev->vendor == PCI_VENDOR_ID_AMD && (dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS || dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)) { /* Do not setup AUX port if ASF is enabled */ if (!is_asf) retval = piix4_setup_sb800(dev, id, 1); } if (retval > 0) { /* Try to add the aux adapter if it exists, * piix4_add_adapter will clean up if this fails */ piix4_add_adapter(dev, retval, false, 0, false, 1, is_sb800 ? piix4_aux_port_name_sb800 : "", &piix4_aux_adapter); } return 0; } static void piix4_adap_remove(struct i2c_adapter *adap) { struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); if (adapdata->smba) { i2c_del_adapter(adap); if (adapdata->port == (0 << piix4_port_shift_sb800)) release_region(adapdata->smba, SMBIOSIZE); kfree(adapdata); kfree(adap); } } static void piix4_remove(struct pci_dev *dev) { int port = piix4_adapter_count; while (--port >= 0) { if (piix4_main_adapters[port]) { piix4_adap_remove(piix4_main_adapters[port]); piix4_main_adapters[port] = NULL; } } if (piix4_aux_adapter) { piix4_adap_remove(piix4_aux_adapter); piix4_aux_adapter = NULL; } } static struct pci_driver piix4_driver = { .name = "piix4_smbus", .id_table = piix4_ids, .probe = piix4_probe, .remove = piix4_remove, }; module_pci_driver(piix4_driver); MODULE_AUTHOR("Frodo Looijaard "); MODULE_AUTHOR("Philip Edelbrock "); MODULE_DESCRIPTION("PIIX4 SMBus driver"); MODULE_LICENSE("GPL");