/******************************************************************* * This file is part of the Emulex Linux Device Driver for * * Fibre Channel Host Bus Adapters. * * Copyright (C) 2017-2024 Broadcom. All Rights Reserved. The term * * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. * * Copyright (C) 2004-2013 Emulex. All rights reserved. * * EMULEX and SLI are trademarks of Emulex. * * www.broadcom.com * * * * This program is free software; you can redistribute it and/or * * modify it under the terms of version 2 of the GNU General * * Public License as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful. * * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * * TO BE LEGALLY INVALID. See the GNU General Public License for * * more details, a copy of which can be found in the file COPYING * * included with this package. * *******************************************************************/ #define FC_MAX_HOLD_RSCN 32 /* max number of deferred RSCNs */ #define FC_MAX_NS_RSP 64512 /* max size NameServer rsp */ #define FC_MAXLOOP 126 /* max devices supported on a fc loop */ #define LPFC_DISC_FLOGI_TMO 10 /* Discovery FLOGI ratov */ /* This is the protocol dependent definition for a Node List Entry. * This is used by Fibre Channel protocol to support FCP. */ /* worker thread events */ enum lpfc_work_type { LPFC_EVT_ONLINE, LPFC_EVT_OFFLINE_PREP, LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL, LPFC_EVT_ELS_RETRY, LPFC_EVT_DEV_LOSS, LPFC_EVT_FASTPATH_MGMT_EVT, LPFC_EVT_RESET_HBA, LPFC_EVT_RECOVER_PORT }; /* structure used to queue event to the discovery tasklet */ struct lpfc_work_evt { struct list_head evt_listp; void *evt_arg1; void *evt_arg2; enum lpfc_work_type evt; }; struct lpfc_scsi_check_condition_event; struct lpfc_scsi_varqueuedepth_event; struct lpfc_scsi_event_header; struct lpfc_fabric_event_header; struct lpfc_fcprdchkerr_event; /* structure used for sending events from fast path */ struct lpfc_fast_path_event { struct lpfc_work_evt work_evt; struct lpfc_vport *vport; union { struct lpfc_scsi_check_condition_event check_cond_evt; struct lpfc_scsi_varqueuedepth_event queue_depth_evt; struct lpfc_scsi_event_header scsi_evt; struct lpfc_fabric_event_header fabric_evt; struct lpfc_fcprdchkerr_event read_check_error; } un; }; #define LPFC_SLI4_MAX_XRI 1024 /* Used to make the ndlp's xri_bitmap */ #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG) struct lpfc_node_rrqs { unsigned long xri_bitmap[XRI_BITMAP_ULONGS]; }; enum lpfc_fc4_xpt_flags { NLP_XPT_REGD = 0x1, SCSI_XPT_REGD = 0x2, NVME_XPT_REGD = 0x4, NVME_XPT_UNREG_WAIT = 0x8, NLP_XPT_HAS_HH = 0x10 }; enum lpfc_nlp_save_flags { /* devloss occurred during recovery */ NLP_IN_RECOV_POST_DEV_LOSS = 0x1, /* wait for outstanding LOGO to cmpl */ NLP_WAIT_FOR_LOGO = 0x2, /* wait for outstanding DA_ID to finish */ NLP_WAIT_FOR_DA_ID = 0x4 }; struct lpfc_nodelist { struct list_head nlp_listp; struct serv_parm fc_sparam; /* buffer for service params */ struct lpfc_name nlp_portname; struct lpfc_name nlp_nodename; spinlock_t lock; /* Node management lock */ unsigned long nlp_flag; /* entry flags */ uint32_t nlp_DID; /* FC D_ID of entry */ uint32_t nlp_last_elscmd; /* Last ELS cmd sent */ uint16_t nlp_type; #define NLP_FC_NODE 0x1 /* entry is an FC node */ #define NLP_FABRIC 0x4 /* entry rep a Fabric entity */ #define NLP_FCP_TARGET 0x8 /* entry is an FCP target */ #define NLP_FCP_INITIATOR 0x10 /* entry is an FCP Initiator */ #define NLP_NVME_TARGET 0x20 /* entry is a NVME Target */ #define NLP_NVME_INITIATOR 0x40 /* entry is a NVME Initiator */ #define NLP_NVME_DISCOVERY 0x80 /* entry has NVME disc srvc */ uint16_t nlp_fc4_type; /* FC types node supports. */ /* Assigned from GID_FF, only * FCP (0x8) and NVME (0x28) * supported. */ #define NLP_FC4_NONE 0x0 #define NLP_FC4_FCP 0x1 /* FC4 Type FCP (value x8)) */ #define NLP_FC4_NVME 0x2 /* FC4 TYPE NVME (value x28) */ uint16_t nlp_rpi; uint16_t nlp_state; /* state transition indicator */ uint16_t nlp_prev_state; /* state transition indicator */ uint16_t nlp_xri; /* output exchange id for RPI */ uint16_t nlp_sid; /* scsi id */ #define NLP_NO_SID 0xffff uint16_t nlp_maxframe; /* Max RCV frame size */ uint8_t nlp_class_sup; /* Supported Classes */ uint8_t nlp_retry; /* used for ELS retries */ uint8_t nlp_fcp_info; /* class info, bits 0-3 */ #define NLP_FCP_2_DEVICE 0x10 /* FCP-2 device */ u8 nlp_nvme_info; /* NVME NSLER Support */ uint8_t vmid_support; /* destination VMID support */ #define NLP_NVME_NSLER 0x1 /* NVME NSLER device */ struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */ struct lpfc_hba *phba; struct fc_rport *rport; /* scsi_transport_fc port structure */ struct lpfc_nvme_rport *nrport; /* nvme transport rport struct. */ struct lpfc_vport *vport; struct lpfc_work_evt els_retry_evt; struct lpfc_work_evt dev_loss_evt; struct lpfc_work_evt recovery_evt; struct kref kref; atomic_t cmd_pending; uint32_t cmd_qdepth; unsigned long last_change_time; unsigned long *active_rrqs_xri_bitmap; uint32_t fc4_prli_sent; /* flags to keep ndlp alive until special conditions are met */ enum lpfc_nlp_save_flags save_flags; enum lpfc_fc4_xpt_flags fc4_xpt_flags; uint32_t nvme_fb_size; /* NVME target's supported byte cnt */ #define NVME_FB_BIT_SHIFT 9 /* PRLI Rsp first burst in 512B units. */ uint32_t nlp_defer_did; /* These wait objects are NPIV specific. These IOs must complete * synchronously. */ wait_queue_head_t *logo_waitq; wait_queue_head_t *da_id_waitq; }; struct lpfc_node_rrq { struct list_head list; uint16_t xritag; uint16_t send_rrq; uint16_t rxid; uint32_t nlp_DID; /* FC D_ID of entry */ struct lpfc_vport *vport; unsigned long rrq_stop_time; }; #define lpfc_ndlp_check_qdepth(phba, ndlp) \ (ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri) /* nlp_flag mask bits */ enum lpfc_nlp_flag { NLP_IGNR_REG_CMPL = 0, /* Rcvd rscn before we cmpl reg login */ NLP_REG_LOGIN_SEND = 1, /* sent reglogin to adapter */ NLP_SUPPRESS_RSP = 4, /* Remote NPort supports suppress rsp */ NLP_PLOGI_SND = 5, /* sent PLOGI request for this entry */ NLP_PRLI_SND = 6, /* sent PRLI request for this entry */ NLP_ADISC_SND = 7, /* sent ADISC request for this entry */ NLP_LOGO_SND = 8, /* sent LOGO request for this entry */ NLP_RNID_SND = 10, /* sent RNID request for this entry */ NLP_NVMET_RECOV = 12, /* NVMET auditing node for recovery. */ NLP_UNREG_INP = 15, /* UNREG_RPI cmd is in progress */ NLP_DROPPED = 16, /* Init ref count has been dropped */ NLP_DELAY_TMO = 17, /* delay timeout is running for node */ NLP_NPR_2B_DISC = 18, /* node is included in num_disc_nodes */ NLP_RCV_PLOGI = 19, /* Rcv'ed PLOGI from remote system */ NLP_LOGO_ACC = 20, /* Process LOGO after ACC completes */ NLP_TGT_NO_SCSIID = 21, /* good PRLI but no binding for scsid */ NLP_ISSUE_LOGO = 22, /* waiting to issue a LOGO */ NLP_IN_DEV_LOSS = 23, /* devloss in progress */ NLP_ACC_REGLOGIN = 24, /* Issue Reg Login after successful ACC */ NLP_NPR_ADISC = 25, /* Issue ADISC when dq'ed from NPR list */ NLP_RM_DFLT_RPI = 26, /* need to remove leftover dflt RPI */ NLP_NODEV_REMOVE = 27, /* Defer removal till discovery ends */ NLP_TARGET_REMOVE = 28, /* Target remove in process */ NLP_SC_REQ = 29, /* Target requires authentication */ NLP_FIRSTBURST = 30, /* Target supports FirstBurst */ NLP_RPI_REGISTERED = 31 /* nlp_rpi is valid */ }; /* There are 4 different double linked lists nodelist entries can reside on. * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used * when Link Up discovery or Registered State Change Notification (RSCN) * processing is needed. Each list holds the nodes that require a PLOGI or * ADISC Extended Link Service (ELS) request. These lists keep track of the * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected * by Link Up) event. The unmapped_list contains all nodes that have * successfully logged into at the Fibre Channel level. The * mapped_list will contain all nodes that are mapped FCP targets. * * The bind list is a list of undiscovered (potentially non-existent) nodes * that we have saved binding information on. This information is used when * nodes transition from the unmapped to the mapped list. */ /* Defines for nlp_state */ #define NLP_STE_UNUSED_NODE 0x0 /* node is just allocated */ #define NLP_STE_PLOGI_ISSUE 0x1 /* PLOGI was sent to NL_PORT */ #define NLP_STE_ADISC_ISSUE 0x2 /* ADISC was sent to NL_PORT */ #define NLP_STE_REG_LOGIN_ISSUE 0x3 /* REG_LOGIN was issued for NL_PORT */ #define NLP_STE_PRLI_ISSUE 0x4 /* PRLI was sent to NL_PORT */ #define NLP_STE_LOGO_ISSUE 0x5 /* LOGO was sent to NL_PORT */ #define NLP_STE_UNMAPPED_NODE 0x6 /* PRLI completed from NL_PORT */ #define NLP_STE_MAPPED_NODE 0x7 /* Identified as a FCP Target */ #define NLP_STE_NPR_NODE 0x8 /* NPort disappeared */ #define NLP_STE_MAX_STATE 0x9 #define NLP_STE_FREED_NODE 0xff /* node entry was freed to MEM_NLP */ /* For UNUSED_NODE state, the node has just been allocated. * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list * and put on the unmapped list. For ADISC processing, the node is taken off * the ADISC list and placed on either the mapped or unmapped list (depending * on its previous state). Once on the unmapped list, a PRLI is issued and the * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is * changed to PRLI_COMPL. If the completion indicates a mapped * node, the node is taken off the unmapped list. The binding list is checked * for a valid binding, or a binding is automatically assigned. If binding * assignment is unsuccessful, the node is left on the unmapped list. If * binding assignment is successful, the associated binding list entry (if * any) is removed, and the node is placed on the mapped list. */ /* * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers * expire, all effected nodes will receive a DEVICE_RM event. */ /* * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists * to either the ADISC or PLOGI list. After a Nameserver query or ALPA loopmap * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to / * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated, * we will first process the ADISC list. 32 entries are processed initially and * ADISC is initited for each one. Completions / Events for each node are * funnelled thru the state machine. As each node finishes ADISC processing, it * starts ADISC for any nodes waiting for ADISC processing. If no nodes are * waiting, and the ADISC list count is identically 0, then we are done. For * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI * list. 32 entries are processed initially and PLOGI is initited for each one. * Completions / Events for each node are funnelled thru the state machine. As * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is * identically 0, then we are done. We have now completed discovery / RSCN * handling. Upon completion, ALL nodes should be on either the mapped or * unmapped lists. */ /* Defines for Node List Entry Events that could happen */ #define NLP_EVT_RCV_PLOGI 0x0 /* Rcv'd an ELS PLOGI command */ #define NLP_EVT_RCV_PRLI 0x1 /* Rcv'd an ELS PRLI command */ #define NLP_EVT_RCV_LOGO 0x2 /* Rcv'd an ELS LOGO command */ #define NLP_EVT_RCV_ADISC 0x3 /* Rcv'd an ELS ADISC command */ #define NLP_EVT_RCV_PDISC 0x4 /* Rcv'd an ELS PDISC command */ #define NLP_EVT_RCV_PRLO 0x5 /* Rcv'd an ELS PRLO command */ #define NLP_EVT_CMPL_PLOGI 0x6 /* Sent an ELS PLOGI command */ #define NLP_EVT_CMPL_PRLI 0x7 /* Sent an ELS PRLI command */ #define NLP_EVT_CMPL_LOGO 0x8 /* Sent an ELS LOGO command */ #define NLP_EVT_CMPL_ADISC 0x9 /* Sent an ELS ADISC command */ #define NLP_EVT_CMPL_REG_LOGIN 0xa /* REG_LOGIN mbox cmd completed */ #define NLP_EVT_DEVICE_RM 0xb /* Device not found in NS / ALPAmap */ #define NLP_EVT_DEVICE_RECOVERY 0xc /* Device existence unknown */ #define NLP_EVT_MAX_EVENT 0xd #define NLP_EVT_NOTHING_PENDING 0xff