// SPDX-License-Identifier: GPL-2.0 // // Freescale P1022DS ALSA SoC Machine driver // // Author: Timur Tabi // // Copyright 2010 Freescale Semiconductor, Inc. #include #include #include #include #include #include #include #include "fsl_dma.h" #include "fsl_ssi.h" #include "fsl_utils.h" /* P1022-specific PMUXCR and DMUXCR bit definitions */ #define CCSR_GUTS_PMUXCR_UART0_I2C1_MASK 0x0001c000 #define CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI 0x00010000 #define CCSR_GUTS_PMUXCR_UART0_I2C1_SSI 0x00018000 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK 0x00000c00 #define CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI 0x00000000 #define CCSR_GUTS_DMUXCR_PAD 1 /* DMA controller/channel set to pad */ #define CCSR_GUTS_DMUXCR_SSI 2 /* DMA controller/channel set to SSI */ /* * Set the DMACR register in the GUTS * * The DMACR register determines the source of initiated transfers for each * channel on each DMA controller. Rather than have a bunch of repetitive * macros for the bit patterns, we just have a function that calculates * them. * * guts: Pointer to GUTS structure * co: The DMA controller (0 or 1) * ch: The channel on the DMA controller (0, 1, 2, or 3) * device: The device to set as the target (CCSR_GUTS_DMUXCR_xxx) */ static inline void guts_set_dmuxcr(struct ccsr_guts __iomem *guts, unsigned int co, unsigned int ch, unsigned int device) { unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch)); clrsetbits_be32(&guts->dmuxcr, 3 << shift, device << shift); } /* There's only one global utilities register */ static phys_addr_t guts_phys; /** * machine_data: machine-specific ASoC device data * * This structure contains data for a single sound platform device on an * P1022 DS. Some of the data is taken from the device tree. */ struct machine_data { struct snd_soc_dai_link dai[2]; struct snd_soc_card card; unsigned int dai_format; unsigned int codec_clk_direction; unsigned int cpu_clk_direction; unsigned int clk_frequency; unsigned int ssi_id; /* 0 = SSI1, 1 = SSI2, etc */ unsigned int dma_id[2]; /* 0 = DMA1, 1 = DMA2, etc */ unsigned int dma_channel_id[2]; /* 0 = ch 0, 1 = ch 1, etc*/ char platform_name[2][DAI_NAME_SIZE]; /* One for each DMA channel */ }; /** * p1022_ds_machine_probe: initialize the board * * This function is used to initialize the board-specific hardware. * * Here we program the DMACR and PMUXCR registers. */ static int p1022_ds_machine_probe(struct snd_soc_card *card) { struct machine_data *mdata = container_of(card, struct machine_data, card); struct ccsr_guts __iomem *guts; guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); if (!guts) { dev_err(card->dev, "could not map global utilities\n"); return -ENOMEM; } /* Enable SSI Tx signal */ clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK, CCSR_GUTS_PMUXCR_UART0_I2C1_UART0_SSI); /* Enable SSI Rx signal */ clrsetbits_be32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_SSI); /* Enable DMA Channel for SSI */ guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], CCSR_GUTS_DMUXCR_SSI); guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], CCSR_GUTS_DMUXCR_SSI); iounmap(guts); return 0; } /** * p1022_ds_startup: program the board with various hardware parameters * * This function takes board-specific information, like clock frequencies * and serial data formats, and passes that information to the codec and * transport drivers. */ static int p1022_ds_startup(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream); struct machine_data *mdata = container_of(rtd->card, struct machine_data, card); struct device *dev = rtd->card->dev; int ret = 0; /* Tell the codec driver what the serial protocol is. */ ret = snd_soc_dai_set_fmt(snd_soc_rtd_to_codec(rtd, 0), mdata->dai_format); if (ret < 0) { dev_err(dev, "could not set codec driver audio format\n"); return ret; } /* * Tell the codec driver what the MCLK frequency is, and whether it's * a slave or master. */ ret = snd_soc_dai_set_sysclk(snd_soc_rtd_to_codec(rtd, 0), 0, mdata->clk_frequency, mdata->codec_clk_direction); if (ret < 0) { dev_err(dev, "could not set codec driver clock params\n"); return ret; } return 0; } /** * p1022_ds_machine_remove: Remove the sound device * * This function is called to remove the sound device for one SSI. We * de-program the DMACR and PMUXCR register. */ static int p1022_ds_machine_remove(struct snd_soc_card *card) { struct machine_data *mdata = container_of(card, struct machine_data, card); struct ccsr_guts __iomem *guts; guts = ioremap(guts_phys, sizeof(struct ccsr_guts)); if (!guts) { dev_err(card->dev, "could not map global utilities\n"); return -ENOMEM; } /* Restore the signal routing */ clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_UART0_I2C1_MASK); clrbits32(&guts->pmuxcr, CCSR_GUTS_PMUXCR_SSI_DMA_TDM_MASK); guts_set_dmuxcr(guts, mdata->dma_id[0], mdata->dma_channel_id[0], 0); guts_set_dmuxcr(guts, mdata->dma_id[1], mdata->dma_channel_id[1], 0); iounmap(guts); return 0; } /** * p1022_ds_ops: ASoC machine driver operations */ static const struct snd_soc_ops p1022_ds_ops = { .startup = p1022_ds_startup, }; /** * p1022_ds_probe: platform probe function for the machine driver * * Although this is a machine driver, the SSI node is the "master" node with * respect to audio hardware connections. Therefore, we create a new ASoC * device for each new SSI node that has a codec attached. */ static int p1022_ds_probe(struct platform_device *pdev) { struct device *dev = pdev->dev.parent; /* ssi_pdev is the platform device for the SSI node that probed us */ struct platform_device *ssi_pdev = to_platform_device(dev); struct device_node *np = ssi_pdev->dev.of_node; struct device_node *codec_np = NULL; struct machine_data *mdata; struct snd_soc_dai_link_component *comp; int ret; const char *sprop; const u32 *iprop; /* Find the codec node for this SSI. */ codec_np = of_parse_phandle(np, "codec-handle", 0); if (!codec_np) { dev_err(dev, "could not find codec node\n"); return -EINVAL; } mdata = kzalloc(sizeof(struct machine_data), GFP_KERNEL); if (!mdata) { ret = -ENOMEM; goto error_put; } comp = devm_kzalloc(&pdev->dev, 6 * sizeof(*comp), GFP_KERNEL); if (!comp) { ret = -ENOMEM; goto error_put; } mdata->dai[0].cpus = &comp[0]; mdata->dai[0].codecs = &comp[1]; mdata->dai[0].platforms = &comp[2]; mdata->dai[0].num_cpus = 1; mdata->dai[0].num_codecs = 1; mdata->dai[0].num_platforms = 1; mdata->dai[1].cpus = &comp[3]; mdata->dai[1].codecs = &comp[4]; mdata->dai[1].platforms = &comp[5]; mdata->dai[1].num_cpus = 1; mdata->dai[1].num_codecs = 1; mdata->dai[1].num_platforms = 1; mdata->dai[0].cpus->dai_name = dev_name(&ssi_pdev->dev); mdata->dai[0].ops = &p1022_ds_ops; /* ASoC core can match codec with device node */ mdata->dai[0].codecs->of_node = codec_np; /* We register two DAIs per SSI, one for playback and the other for * capture. We support codecs that have separate DAIs for both playback * and capture. */ memcpy(&mdata->dai[1], &mdata->dai[0], sizeof(struct snd_soc_dai_link)); /* The DAI names from the codec (snd_soc_dai_driver.name) */ mdata->dai[0].codecs->dai_name = "wm8776-hifi-playback"; mdata->dai[1].codecs->dai_name = "wm8776-hifi-capture"; /* Get the device ID */ iprop = of_get_property(np, "cell-index", NULL); if (!iprop) { dev_err(&pdev->dev, "cell-index property not found\n"); ret = -EINVAL; goto error; } mdata->ssi_id = be32_to_cpup(iprop); /* Get the serial format and clock direction. */ sprop = of_get_property(np, "fsl,mode", NULL); if (!sprop) { dev_err(&pdev->dev, "fsl,mode property not found\n"); ret = -EINVAL; goto error; } if (strcasecmp(sprop, "i2s-slave") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBP_CFP; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; /* In i2s-slave mode, the codec has its own clock source, so we * need to get the frequency from the device tree and pass it to * the codec driver. */ iprop = of_get_property(codec_np, "clock-frequency", NULL); if (!iprop || !*iprop) { dev_err(&pdev->dev, "codec bus-frequency " "property is missing or invalid\n"); ret = -EINVAL; goto error; } mdata->clk_frequency = be32_to_cpup(iprop); } else if (strcasecmp(sprop, "i2s-master") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBC_CFC; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "lj-slave") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBP_CFP; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "lj-master") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_CBC_CFC; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "rj-slave") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBP_CFP; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "rj-master") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_CBC_CFC; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else if (strcasecmp(sprop, "ac97-slave") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBP_CFP; mdata->codec_clk_direction = SND_SOC_CLOCK_OUT; mdata->cpu_clk_direction = SND_SOC_CLOCK_IN; } else if (strcasecmp(sprop, "ac97-master") == 0) { mdata->dai_format = SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_AC97 | SND_SOC_DAIFMT_CBC_CFC; mdata->codec_clk_direction = SND_SOC_CLOCK_IN; mdata->cpu_clk_direction = SND_SOC_CLOCK_OUT; } else { dev_err(&pdev->dev, "unrecognized fsl,mode property '%s'\n", sprop); ret = -EINVAL; goto error; } if (!mdata->clk_frequency) { dev_err(&pdev->dev, "unknown clock frequency\n"); ret = -EINVAL; goto error; } /* Find the playback DMA channel to use. */ mdata->dai[0].platforms->name = mdata->platform_name[0]; ret = fsl_asoc_get_dma_channel(np, "fsl,playback-dma", &mdata->dai[0], &mdata->dma_channel_id[0], &mdata->dma_id[0]); if (ret) { dev_err(&pdev->dev, "missing/invalid playback DMA phandle\n"); goto error; } /* Find the capture DMA channel to use. */ mdata->dai[1].platforms->name = mdata->platform_name[1]; ret = fsl_asoc_get_dma_channel(np, "fsl,capture-dma", &mdata->dai[1], &mdata->dma_channel_id[1], &mdata->dma_id[1]); if (ret) { dev_err(&pdev->dev, "missing/invalid capture DMA phandle\n"); goto error; } /* Initialize our DAI data structure. */ mdata->dai[0].stream_name = "playback"; mdata->dai[1].stream_name = "capture"; mdata->dai[0].name = mdata->dai[0].stream_name; mdata->dai[1].name = mdata->dai[1].stream_name; mdata->card.probe = p1022_ds_machine_probe; mdata->card.remove = p1022_ds_machine_remove; mdata->card.name = pdev->name; /* The platform driver name */ mdata->card.owner = THIS_MODULE; mdata->card.dev = &pdev->dev; mdata->card.num_links = 2; mdata->card.dai_link = mdata->dai; /* Register with ASoC */ ret = snd_soc_register_card(&mdata->card); if (ret) { dev_err(&pdev->dev, "could not register card\n"); goto error; } of_node_put(codec_np); return 0; error: kfree(mdata); error_put: of_node_put(codec_np); return ret; } /** * p1022_ds_remove: remove the platform device * * This function is called when the platform device is removed. */ static void p1022_ds_remove(struct platform_device *pdev) { struct snd_soc_card *card = platform_get_drvdata(pdev); struct machine_data *mdata = container_of(card, struct machine_data, card); snd_soc_unregister_card(card); kfree(mdata); } static struct platform_driver p1022_ds_driver = { .probe = p1022_ds_probe, .remove = p1022_ds_remove, .driver = { /* * The name must match 'compatible' property in the device tree, * in lowercase letters. */ .name = "snd-soc-p1022ds", }, }; /** * p1022_ds_init: machine driver initialization. * * This function is called when this module is loaded. */ static int __init p1022_ds_init(void) { struct device_node *guts_np; struct resource res; /* Get the physical address of the global utilities registers */ guts_np = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); if (of_address_to_resource(guts_np, 0, &res)) { pr_err("snd-soc-p1022ds: missing/invalid global utils node\n"); of_node_put(guts_np); return -EINVAL; } guts_phys = res.start; of_node_put(guts_np); return platform_driver_register(&p1022_ds_driver); } /** * p1022_ds_exit: machine driver exit * * This function is called when this driver is unloaded. */ static void __exit p1022_ds_exit(void) { platform_driver_unregister(&p1022_ds_driver); } module_init(p1022_ds_init); module_exit(p1022_ds_exit); MODULE_AUTHOR("Timur Tabi "); MODULE_DESCRIPTION("Freescale P1022 DS ALSA SoC machine driver"); MODULE_LICENSE("GPL v2");