/* sysmocom quad-modem sysmoQMOD board definition * * (C) 2016-2017 by Harald Welte * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #pragma once #include "board_common.h" #include "simtrace_usb.h" /** Name of the board */ #define BOARD_NAME "QMOD" /** Board definition */ #define qmod /** oscillator used as main clock source (in Hz) */ #define BOARD_MAINOSC 12000000 /** desired main clock frequency (in Hz, based on BOARD_MAINOSC) */ #define BOARD_MCK 58000000 // 18.432 * 29 / 6 /** board has external clock, not crystal */ #define BOARD_MAINOSC_BYPASS /** MCU pin connected to red LED */ #define PIO_LED_RED PIO_PA17 /** MCU pin connected to green LED */ #define PIO_LED_GREEN PIO_PA18 /** red LED pin definition */ #define PIN_LED_RED {PIO_LED_RED, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} /** green LED pin definition */ #define PIN_LED_GREEN {PIO_LED_GREEN, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} /** LEDs pin definition */ #define PINS_LEDS PIN_LED_RED, PIN_LED_GREEN /** index for red LED in LEDs pin definition array */ #define LED_NUM_RED 0 /** index for green LED in LEDs pin definition array */ #define LED_NUM_GREEN 1 /** the green LED is actually red and used as indication for USIM1 */ #define LED_USIM1 LED_GREEN /** the green LED is actually red and used as indication for USIM2 */ #define LED_USIM2 LED_RED /* USIM 2 interface (USART) */ #define PIN_USIM2_CLK {PIO_PA2, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_USIM2_IO {PIO_PA6, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PINS_ISO7816_USIM2 PIN_USIM2_CLK, PIN_USIM2_IO /* USIM 2 interface (TC) */ #define PIN_USIM2_IO_TC {PIO_PA1, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_USIM2_CLK_TC {PIO_PA4, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} #define PINS_TC_USIM2 PIN_USIM2_IO_TC, PIN_USIM2_CLK_TC /* USIM 1 interface (USART) */ #define PIN_USIM1_IO {PIO_PA22, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PIN_USIM1_CLK {PIO_PA23, PIOA, ID_PIOA, PIO_PERIPH_A, PIO_DEFAULT} #define PINS_ISO7816_USIM1 PIN_USIM1_CLK, PIN_USIM1_IO /* USIM 1 interface (TC) */ #define PIN_USIM1_IO_TC {PIO_PA27, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} #define PIN_USIM1_CLK_TC {PIO_PA29, PIOA, ID_PIOA, PIO_PERIPH_B, PIO_DEFAULT} #define PINS_TC_USIM1 PIN_USIM1_IO_TC, PIN_USIM1_CLK_TC #define PIN_USIM1_nRST {PIO_PA24, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} #define PIN_USIM1_VCC {PIO_PB3, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} #define PIN_USIM2_nRST {PIO_PA7, PIOA, ID_PIOA, PIO_INPUT, PIO_DEFAULT} #define PIN_USIM2_VCC {PIO_PB2, PIOB, ID_PIOB, PIO_INPUT, PIO_DEFAULT} #define PINS_USIM1 PINS_TC_USIM1, PINS_ISO7816_USIM1, PIN_USIM1_nRST #define PINS_USIM2 PINS_TC_USIM2, PINS_ISO7816_USIM2, PIN_USIM2_nRST /* from v3 and onwards only (!) */ #define PIN_DET_USIM1_PRES {PIO_PA12, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE} #define PIN_DET_USIM2_PRES {PIO_PA8, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE} /* only in v2 and lower (!) */ #define PIN_PRTPWR_OVERRIDE {PIO_PA8, PIOA, ID_PIOA, PIO_OUTPUT_1, PIO_DEFAULT} /* inputs reading the WWAN LED level */ #define PIN_WWAN1 {PIO_PA15, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE} #define PIN_WWAN2 {PIO_PA16, PIOA, ID_PIOA, PIO_INPUT, PIO_PULLUP | PIO_DEGLITCH | PIO_IT_EDGE} #define PINS_WWAN_IN { PIN_WWAN1, PIN_WWAN2 } /* outputs controlling RESET input of modems */ #define PIN_PERST1 {PIO_PA25, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} #define PIN_PERST2 {PIO_PA26, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_PULLUP} #define PINS_PERST { PIN_PERST1, PIN_PERST2 } #define PIN_VERSION_DET {PIO_PA19, PIOA, ID_PIOA, PIO_PERIPH_D, PIO_DEFAULT} /* GPIO towards SPDT switches between real SIM and SAM3 */ #define PIN_SIM_SWITCH1 {PIO_PA20, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} #define PIN_SIM_SWITCH2 {PIO_PA28, PIOA, ID_PIOA, PIO_OUTPUT_0, PIO_DEFAULT} #define BOARD_USB_BMATTRIBUTES USBConfigurationDescriptor_SELFPOWERED_NORWAKEUP #define BOARD_USB_VENDOR_ID USB_VENDOR_OPENMOKO #define BOARD_USB_PRODUCT_ID USB_PRODUCT_QMOD_SAM3 #define BOARD_DFU_USB_PRODUCT_ID USB_PRODUCT_QMOD_SAM3_DFU #define BOARD_USB_RELEASE 0x010 #define CARDEMU_SECOND_UART #define DETECT_VCC_BY_ADC #define VCC_UV_THRESH_1V8 1500000 #define VCC_UV_THRESH_3V 2500000 #define HAVE_CARDEM