Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=14009): Process ended prematurely: osmo-stp_10.42.42.5(pid=14009) [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14009)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 21:00:58.554956 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:58.566880 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 21:00:58.711578 tst iperf3.py: using LAC 16782 21:00:58.840097 tst iperf3.py: using RAC 207 21:00:58.964133 tst iperf3.py: using CellId 16782 21:00:59.082568 tst iperf3.py: using BVCI 16783 21:00:59.106201 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.117155 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.127733 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.139131 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.150323 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.161389 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.172567 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.183495 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 21:00:59.194730 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 21:00:59.475459 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 21:00:59.602025 run iperf3-srv_10.42.42.10: Starting iperf3-srv 21:00:59.916045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14001): Launched 21:01:00.178453 run iperf3-srv_10.42.42.10(pid=14002): Launched 21:01:00.363741 tst iperf3.py:8: start network... 21:01:00.489953 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:01:01.041528 run create_hlr_db(pid=14003): Launched 21:01:01.238297 bus /gobi_6: Setting Powered False 21:01:02.277948 run create_hlr_db(pid=14003): Terminated: ok {rc=0} 21:01:02.714001 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14005): Launched 21:01:03.041982 run osmo-hlr_10.42.42.2(pid=14006): Launched 21:01:03.161713 run osmo-stp_10.42.42.5: Starting osmo-stp 21:01:03.731412 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14008): Launched 21:01:04.061350 run osmo-stp_10.42.42.5(pid=14009): Launched 21:01:04.180621 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:01:04.751103 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14011): Launched 21:01:04.867543 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:01:05.154594 run patchelf(pid=14012): Launched 21:01:05.346243 run osmo-stp_10.42.42.5(pid=14009): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14009)] 21:01:05.485440 run osmo-stp_10.42.42.5(pid=14009): stdout: | (launched: 2022-12-08_21:01:03.898666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:05.625663 run osmo-stp_10.42.42.5(pid=14009): stderr: | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210104092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:05.760828 run osmo-stp_10.42.42.5(pid=14009): stdout: | (launched: 2022-12-08_21:01:03.898666) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:01:05.895252 run osmo-stp_10.42.42.5(pid=14009): stderr: | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208210104091 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208210104092 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208210104092 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:01:06.051702 run patchelf(pid=14012): Terminating (SIGINT) 21:01:06.235162 run patchelf(pid=14012): Terminated: ok {rc=0} 21:01:06.268452 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=14009): Process ended prematurely: osmo-stp_10.42.42.5(pid=14009) [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14009)] [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 21:01:06.278250 tst iperf3.py:8: Test FAILED (7.8 sec) 21:01:06.340904 run osmo-hlr_10.42.42.2(pid=14006): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14006)] 21:01:06.391882 run osmo-hlr_10.42.42.2(pid=14006): stdout: | (launched: 2022-12-08_21:01:02.880000) 21:01:06.443576 run osmo-hlr_10.42.42.2(pid=14006): stderr: | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208210103079 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208210103091 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208210103100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208210103100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208210103100 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:01:06.487904 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14001): Terminating (SIGTERM) 21:01:06.530098 run iperf3-srv_10.42.42.10(pid=14002): Terminating (SIGTERM) 21:01:06.571977 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14005): Terminating (SIGTERM) 21:01:06.614104 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14008): Terminating (SIGTERM) 21:01:06.655908 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14011): Terminating (SIGTERM) 21:01:06.665830 --- ParallelTerminationStrategy: PID 14001 died... 21:01:06.722444 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14001): Terminated: ok {rc=0} 21:01:06.732913 --- ParallelTerminationStrategy: PID 14002 died... 21:01:06.789339 run iperf3-srv_10.42.42.10(pid=14002): Terminated {rc=256} 21:01:06.799587 --- ParallelTerminationStrategy: PID 14005 died... 21:01:06.855479 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14005): Terminated: ok {rc=0} 21:01:06.865863 --- ParallelTerminationStrategy: PID 14008 died... 21:01:06.921544 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14008): Terminated: ok {rc=0} 21:01:06.931785 --- ParallelTerminationStrategy: PID 14011 died... 21:01:06.987564 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14011): Terminated: ok {rc=0} 21:01:07.074326 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14009): Process ended prematurely: osmo-stp_10.42.42.5(pid=14009) [trial-2349↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14009)]