Failed
gprs:trx-sysmocell5000+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=11737): Process ended prematurely: osmo-stp_10.42.42.5(pid=11737) [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11737)]
Standard Output
---------------------------------------------- trial-2349 gprs:trx-sysmocell5000+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:36:49.405414 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:49.416214 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:36:49.554207 tst cs_paging_gprs_active.py: using LAC 16653 20:36:49.682788 tst cs_paging_gprs_active.py: using RAC 78 20:36:49.812783 tst cs_paging_gprs_active.py: using CellId 16653 20:36:49.942215 tst cs_paging_gprs_active.py: using BVCI 16654 20:36:49.967518 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:49.978997 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:49.990475 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.002402 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.014160 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.026217 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.038909 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.050378 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:36:50.062517 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:36:50.183305 tst gprs:trx-sysmocell5000+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:36:50.483705 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:36:50.620822 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:36:50.966109 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11727): Launched 20:36:51.250131 run iperf3-srv_10.42.42.10(pid=11728): Launched 20:36:51.451579 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:36:51.588571 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:36:51.929329 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11729): Launched 20:36:52.211100 run iperf3-srv_10.42.42.10(pid=11730): Launched 20:36:52.412729 tst cs_paging_gprs_active.py:38: start network... 20:36:52.549517 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:36:53.074799 run create_hlr_db(pid=11731): Launched 20:36:53.265621 bus /gobi_6: Setting Powered False 20:36:54.285443 run create_hlr_db(pid=11731): Terminated: ok {rc=0} 20:36:54.723380 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11733): Launched 20:36:55.052349 run osmo-hlr_10.42.42.2(pid=11734): Launched 20:36:55.173910 run osmo-stp_10.42.42.5: Starting osmo-stp 20:36:55.745288 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11736): Launched 20:36:56.075752 run osmo-stp_10.42.42.5(pid=11737): Launched 20:36:56.194754 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:36:56.770605 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11739): Launched 20:36:56.888688 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:36:57.177083 run patchelf(pid=11740): Launched 20:36:57.369439 run osmo-stp_10.42.42.5(pid=11737): ERR: Terminated: ERROR {rc=1} [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11737)] 20:36:57.509664 run osmo-stp_10.42.42.5(pid=11737): stdout: | (launched: 2022-12-08_20:36:55.913510) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:36:57.650442 run osmo-stp_10.42.42.5(pid=11737): stderr: | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203656107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:36:57.786759 run osmo-stp_10.42.42.5(pid=11737): stdout: | (launched: 2022-12-08_20:36:55.913510) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:36:57.922614 run osmo-stp_10.42.42.5(pid=11737): stderr: | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208203656106 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208203656107 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208203656107 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:36:58.079391 run patchelf(pid=11740): Terminating (SIGINT) 20:36:58.263306 run patchelf(pid=11740): Terminated: ok {rc=0} 20:36:58.297332 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11737): Process ended prematurely: osmo-stp_10.42.42.5(pid=11737) [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11737)] [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:36:58.307321 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 20:36:58.370968 run osmo-hlr_10.42.42.2(pid=11734): ERR: Terminated: ERROR {rc=237} [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11734)] 20:36:58.423376 run osmo-hlr_10.42.42.2(pid=11734): stdout: | (launched: 2022-12-08_20:36:54.891258) 20:36:58.475999 run osmo-hlr_10.42.42.2(pid=11734): stderr: | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208203655093 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208203655106 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2349/run.2022-12-08_20-04-33/gprs:trx-sysmocell5000+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208203655114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208203655114 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208203655115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:36:58.520679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11727): Terminating (SIGTERM) 20:36:58.562752 run iperf3-srv_10.42.42.10(pid=11728): Terminating (SIGTERM) 20:36:58.604798 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11729): Terminating (SIGTERM) 20:36:58.646904 run iperf3-srv_10.42.42.10(pid=11730): Terminating (SIGTERM) 20:36:58.689212 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11733): Terminating (SIGTERM) 20:36:58.731521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11736): Terminating (SIGTERM) 20:36:58.774076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11739): Terminating (SIGTERM) 20:36:58.783803 --- ParallelTerminationStrategy: PID 11727 died... 20:36:58.840381 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11727): Terminated: ok {rc=0} 20:36:58.850604 --- ParallelTerminationStrategy: PID 11728 died... 20:36:58.906710 run iperf3-srv_10.42.42.10(pid=11728): Terminated {rc=256} 20:36:58.916827 --- ParallelTerminationStrategy: PID 11729 died... 20:36:58.972497 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11729): Terminated: ok {rc=0} 20:36:58.982586 --- ParallelTerminationStrategy: PID 11730 died... 20:36:59.038171 run iperf3-srv_10.42.42.10(pid=11730): Terminated {rc=256} 20:36:59.048224 --- ParallelTerminationStrategy: PID 11733 died... 20:36:59.103970 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11733): Terminated: ok {rc=0} 20:36:59.114035 --- ParallelTerminationStrategy: PID 11736 died... 20:36:59.169714 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11736): Terminated: ok {rc=0} 20:36:59.179901 --- ParallelTerminationStrategy: PID 11739 died... 20:36:59.235816 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11739): Terminated: ok {rc=0} 20:36:59.323331 bus /gobi_0: Setting Powered False 20:37:00.430511 bus /gobi_0: Setting Powered False 20:37:01.560391 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11737): Process ended prematurely: osmo-stp_10.42.42.5(pid=11737) [trial-2349↪gprs:trx-sysmocell5000+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11737)]