Failed
gprs:oc2g.ping.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=18719): Process ended prematurely: osmo-stp_10.42.42.5(pid=18719) [trial-2350↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18719)]
Standard Output
---------------------------------------------- trial-2350 gprs:oc2g ping.py ---------------------------------------------- 21:58:50.932533 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:50.943826 tst gprs:oc2g: Using 1 x bts (candidates: 1) 21:58:51.075545 tst ping.py: using LAC 17019 21:58:51.202390 tst ping.py: using RAC 189 21:58:51.329244 tst ping.py: using CellId 17019 21:58:51.458373 tst ping.py: using BVCI 17020 21:58:51.483272 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.494214 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.504917 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.515943 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.526949 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.537931 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.548867 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 21:58:51.559948 tst gprs:oc2g: Using 1 x modem (candidates: 4) 21:58:51.835729 tst ping.py:19: start network... 21:58:51.962653 run osmo-hlr_10.42.42.2: Starting osmo-hlr 21:58:52.438314 run create_hlr_db(pid=18713): Launched 21:58:52.613815 bus /gobi_6: Setting Powered False 21:58:53.633953 run create_hlr_db(pid=18713): Terminated: ok {rc=0} 21:58:54.063539 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18715): Launched 21:58:54.388504 run osmo-hlr_10.42.42.2(pid=18716): Launched 21:58:54.506871 run osmo-stp_10.42.42.5: Starting osmo-stp 21:58:55.074069 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18718): Launched 21:58:55.397654 run osmo-stp_10.42.42.5(pid=18719): Launched 21:58:55.514619 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 21:58:56.079307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18721): Launched 21:58:56.194985 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 21:58:56.478201 run patchelf(pid=18722): Launched 21:58:56.669128 run osmo-stp_10.42.42.5(pid=18719): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18719)] 21:58:56.808249 run osmo-stp_10.42.42.5(pid=18719): stdout: | (launched: 2022-12-08_21:58:55.239048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:58:56.947511 run osmo-stp_10.42.42.5(pid=18719): stderr: | �[0;m�[38;5;43m20221208215855433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215855434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215855434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215855434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:58:57.082636 run osmo-stp_10.42.42.5(pid=18719): stdout: | (launched: 2022-12-08_21:58:55.239048) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 21:58:57.216126 run osmo-stp_10.42.42.5(pid=18719): stderr: | �[0;m�[38;5;43m20221208215855433 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208215855434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208215855434 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208215855434 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208215855435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 21:58:57.371837 run patchelf(pid=18722): Terminating (SIGINT) 21:58:57.554458 run patchelf(pid=18722): Terminated: ok {rc=0} 21:58:57.587283 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=18719): Process ended prematurely: osmo-stp_10.42.42.5(pid=18719) [trial-2350↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18719)] [trial-2350↪gprs:oc2g↪ping.py:22] 21:58:57.596488 tst ping.py:22: Test FAILED (6.7 sec) 21:58:57.661129 run osmo-hlr_10.42.42.2(pid=18716): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:oc2g↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18716)] 21:58:57.714077 run osmo-hlr_10.42.42.2(pid=18716): stdout: | (launched: 2022-12-08_21:58:54.228427) 21:58:57.767459 run osmo-hlr_10.42.42.2(pid=18716): stderr: | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208215854426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208215854438 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:oc2g/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208215854446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208215854446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208215854446 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 21:58:57.812830 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18715): Terminating (SIGTERM) 21:58:57.855724 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18718): Terminating (SIGTERM) 21:58:57.898590 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18721): Terminating (SIGTERM) 21:58:57.908576 --- ParallelTerminationStrategy: PID 18715 died... 21:58:57.965906 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18715): Terminated: ok {rc=0} 21:58:57.976319 --- ParallelTerminationStrategy: PID 18718 died... 21:58:58.033613 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18718): Terminated: ok {rc=0} 21:58:58.044011 --- ParallelTerminationStrategy: PID 18721 died... 21:58:58.100890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18721): Terminated: ok {rc=0} 21:58:58.189568 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18719): Process ended prematurely: osmo-stp_10.42.42.5(pid=18719) [trial-2350↪gprs:oc2g↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18719)]