Failed
gprs:trx-lms-limenet-micro.iperf3.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=23545): Process ended prematurely: osmo-stp_10.42.42.5(pid=23545) [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23545)]
Standard Output
---------------------------------------------- trial-2350 gprs:trx-lms-limenet-micro iperf3.py ---------------------------------------------- 22:40:51.985100 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:51.996775 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 22:40:52.139151 tst iperf3.py: using LAC 17243 22:40:52.269381 tst iperf3.py: using RAC 158 22:40:52.399678 tst iperf3.py: using CellId 17243 22:40:52.528335 tst iperf3.py: using BVCI 17244 22:40:52.553629 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.564805 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.575850 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.586941 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.597906 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.608747 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.620240 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.631265 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 22:40:52.642397 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 22:40:52.936384 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 22:40:53.073359 run iperf3-srv_10.42.42.10: Starting iperf3-srv 22:40:53.412430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23537): Launched 22:40:53.694512 run iperf3-srv_10.42.42.10(pid=23538): Launched 22:40:53.894978 tst iperf3.py:8: start network... 22:40:54.031741 run osmo-hlr_10.42.42.2: Starting osmo-hlr 22:40:54.554012 run create_hlr_db(pid=23539): Launched 22:40:54.742885 bus /gobi_6: Setting Powered False 22:40:55.763943 run create_hlr_db(pid=23539): Terminated: ok {rc=0} 22:40:56.173495 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23541): Launched 22:40:56.479930 run osmo-hlr_10.42.42.2(pid=23542): Launched 22:40:56.597565 run osmo-stp_10.42.42.5: Starting osmo-stp 22:40:57.128409 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23544): Launched 22:40:57.435476 run osmo-stp_10.42.42.5(pid=23545): Launched 22:40:57.547626 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 22:40:58.078496 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23547): Launched 22:40:58.187974 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 22:40:58.455091 run patchelf(pid=23548): Launched 22:40:58.634863 run osmo-stp_10.42.42.5(pid=23545): ERR: Terminated: ERROR {rc=1} [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23545)] 22:40:58.766475 run osmo-stp_10.42.42.5(pid=23545): stdout: | (launched: 2022-12-08_22:40:57.284743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:58.898320 run osmo-stp_10.42.42.5(pid=23545): stderr: | �[0;m�[38;5;43m20221208224057454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208224057454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208224057455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208224057455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208224057455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208224057456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208224057456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:59.027873 run osmo-stp_10.42.42.5(pid=23545): stdout: | (launched: 2022-12-08_22:40:57.284743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 22:40:59.155496 run osmo-stp_10.42.42.5(pid=23545): stderr: | �[0;m�[38;5;43m20221208224057454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208224057454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208224057455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208224057455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208224057455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208224057456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208224057456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 22:40:59.302612 run patchelf(pid=23548): Terminating (SIGINT) 22:40:59.476076 run patchelf(pid=23548): Terminated: ok {rc=0} 22:40:59.507698 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=23545): Process ended prematurely: osmo-stp_10.42.42.5(pid=23545) [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23545)] [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py:8] 22:40:59.517010 tst iperf3.py:8: Test FAILED (7.6 sec) 22:40:59.579354 run osmo-hlr_10.42.42.2(pid=23542): ERR: Terminated: ERROR {rc=237} [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=23542)] 22:40:59.629818 run osmo-hlr_10.42.42.2(pid=23542): stdout: | (launched: 2022-12-08_22:40:56.328789) 22:40:59.680776 run osmo-hlr_10.42.42.2(pid=23542): stderr: | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208224056504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208224056517 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2350/run.2022-12-08_21-44-24/gprs:trx-lms-limenet-micro/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208224056527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208224056527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208224056527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 22:40:59.723705 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23537): Terminating (SIGTERM) 22:40:59.764506 run iperf3-srv_10.42.42.10(pid=23538): Terminating (SIGTERM) 22:40:59.806287 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23541): Terminating (SIGTERM) 22:40:59.847093 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23544): Terminating (SIGTERM) 22:40:59.888023 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23547): Terminating (SIGTERM) 22:40:59.898030 --- ParallelTerminationStrategy: PID 23537 died... 22:40:59.953250 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=23537): Terminated: ok {rc=0} 22:40:59.963347 --- ParallelTerminationStrategy: PID 23538 died... 22:41:00.018199 run iperf3-srv_10.42.42.10(pid=23538): Terminated {rc=256} 22:41:00.028118 --- ParallelTerminationStrategy: PID 23541 died... 22:41:00.083001 run pcap-recorder_any(filters='host 10.42.42.2')(pid=23541): Terminated: ok {rc=0} 22:41:00.093353 --- ParallelTerminationStrategy: PID 23544 died... 22:41:00.147882 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=23544): Terminated: ok {rc=0} 22:41:00.158197 --- ParallelTerminationStrategy: PID 23547 died... 22:41:00.212695 run pcap-recorder_any(filters='host 10.42.42.6')(pid=23547): Terminated: ok {rc=0} 22:41:00.301855 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=23545): Process ended prematurely: osmo-stp_10.42.42.5(pid=23545) [trial-2350↪gprs:trx-lms-limenet-micro↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=23545)]