Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=27138): Process ended prematurely: osmo-stp_10.42.42.5(pid=27138) [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27138)]
Standard Output
---------------------------------------------- trial-2351 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 23:20:36.954809 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:36.966199 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 23:20:37.121562 tst cs_paging_gprs_active.py: using LAC 17450 23:20:37.246695 tst cs_paging_gprs_active.py: using RAC 110 23:20:37.377082 tst cs_paging_gprs_active.py: using CellId 17450 23:20:37.508714 tst cs_paging_gprs_active.py: using BVCI 17451 23:20:37.534679 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.546191 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.557557 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.568711 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.579940 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.591186 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.602511 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.613580 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 23:20:37.624808 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:37.746663 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 23:20:38.034809 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:20:38.165282 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:38.492728 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27128): Launched 23:20:38.764923 run iperf3-srv_10.42.42.10(pid=27129): Launched 23:20:38.957003 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:20:39.087434 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:20:39.413867 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27130): Launched 23:20:39.684759 run iperf3-srv_10.42.42.10(pid=27131): Launched 23:20:39.877139 tst cs_paging_gprs_active.py:38: start network... 23:20:40.008666 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:20:40.506345 run create_hlr_db(pid=27132): Launched 23:20:40.688771 bus /gobi_6: Setting Powered False 23:20:41.707763 run create_hlr_db(pid=27132): Terminated: ok {rc=0} 23:20:42.127343 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27134): Launched 23:20:42.445495 run osmo-hlr_10.42.42.2(pid=27135): Launched 23:20:42.567283 run osmo-stp_10.42.42.5: Starting osmo-stp 23:20:43.121391 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27137): Launched 23:20:43.438352 run osmo-stp_10.42.42.5(pid=27138): Launched 23:20:43.552583 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:20:44.101741 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27140): Launched 23:20:44.213885 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:20:44.490768 run patchelf(pid=27141): Launched 23:20:44.674517 run osmo-stp_10.42.42.5(pid=27138): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27138)] 23:20:44.808628 run osmo-stp_10.42.42.5(pid=27138): stdout: | (launched: 2022-12-08_23:20:43.280832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:44.942944 run osmo-stp_10.42.42.5(pid=27138): stderr: | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232043456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:45.072716 run osmo-stp_10.42.42.5(pid=27138): stdout: | (launched: 2022-12-08_23:20:43.280832) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:20:45.201817 run osmo-stp_10.42.42.5(pid=27138): stderr: | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208232043455 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208232043456 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208232043456 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:20:45.351516 run patchelf(pid=27141): Terminating (SIGINT) 23:20:45.527345 run patchelf(pid=27141): Terminated: ok {rc=0} 23:20:45.559432 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=27138): Process ended prematurely: osmo-stp_10.42.42.5(pid=27138) [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27138)] [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 23:20:45.568714 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 23:20:45.629487 run osmo-hlr_10.42.42.2(pid=27135): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=27135)] 23:20:45.679013 run osmo-hlr_10.42.42.2(pid=27135): stdout: | (launched: 2022-12-08_23:20:42.287068) 23:20:45.728327 run osmo-hlr_10.42.42.2(pid=27135): stderr: | �[0;m�[1;31m20221208232042469 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208232042470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208232042470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208232042470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208232042470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208232042470 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208232042491 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208232042501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208232042501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208232042501 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:20:45.770655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27128): Terminating (SIGTERM) 23:20:45.810821 run iperf3-srv_10.42.42.10(pid=27129): Terminating (SIGTERM) 23:20:45.876373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27130): Terminating (SIGTERM) 23:20:45.919885 run iperf3-srv_10.42.42.10(pid=27131): Terminating (SIGTERM) 23:20:45.965671 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27134): Terminating (SIGTERM) 23:20:46.009415 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27137): Terminating (SIGTERM) 23:20:46.052262 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27140): Terminating (SIGTERM) 23:20:46.063359 --- ParallelTerminationStrategy: PID 27128 died... 23:20:46.120332 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27128): Terminated: ok {rc=0} 23:20:46.131122 --- ParallelTerminationStrategy: PID 27129 died... 23:20:46.187971 run iperf3-srv_10.42.42.10(pid=27129): Terminated {rc=256} 23:20:46.198664 --- ParallelTerminationStrategy: PID 27130 died... 23:20:46.255731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=27130): Terminated: ok {rc=0} 23:20:46.266490 --- ParallelTerminationStrategy: PID 27131 died... 23:20:46.323326 run iperf3-srv_10.42.42.10(pid=27131): Terminated {rc=256} 23:20:46.334123 --- ParallelTerminationStrategy: PID 27134 died... 23:20:46.391584 run pcap-recorder_any(filters='host 10.42.42.2')(pid=27134): Terminated: ok {rc=0} 23:20:46.402381 --- ParallelTerminationStrategy: PID 27137 died... 23:20:46.459445 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=27137): Terminated: ok {rc=0} 23:20:46.470144 --- ParallelTerminationStrategy: PID 27140 died... 23:20:46.527390 run pcap-recorder_any(filters='host 10.42.42.6')(pid=27140): Terminated: ok {rc=0} 23:20:46.626842 bus /gobi_0: Setting Powered False 23:20:47.735985 bus /gobi_0: Setting Powered False 23:20:48.847896 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=27138): Process ended prematurely: osmo-stp_10.42.42.5(pid=27138) [trial-2351↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=27138)]