Failed
gprs:trx-b200.iperf3.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=28368): Process ended prematurely: osmo-stp_10.42.42.5(pid=28368) [trial-2351↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28368)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-b200 iperf3.py ---------------------------------------------- 23:34:17.549834 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:17.560856 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 23:34:17.698400 tst iperf3.py: using LAC 17524 23:34:17.817033 tst iperf3.py: using RAC 184 23:34:17.935588 tst iperf3.py: using CellId 17524 23:34:18.055816 tst iperf3.py: using BVCI 17525 23:34:18.078898 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.089527 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.099725 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.110442 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.121059 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.131391 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.142272 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.152869 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 23:34:18.163989 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 23:34:18.454500 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 23:34:18.588560 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:34:18.921235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28360): Launched 23:34:19.197270 run iperf3-srv_10.42.42.10(pid=28361): Launched 23:34:19.394848 tst iperf3.py:8: start network... 23:34:19.528648 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:34:20.039699 run create_hlr_db(pid=28362): Launched 23:34:20.225717 bus /gobi_6: Setting Powered False 23:34:21.247340 run create_hlr_db(pid=28362): Terminated: ok {rc=0} 23:34:21.673863 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28364): Launched 23:34:21.993667 run osmo-hlr_10.42.42.2(pid=28365): Launched 23:34:22.110499 run osmo-stp_10.42.42.5: Starting osmo-stp 23:34:22.670833 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28367): Launched 23:34:22.993525 run osmo-stp_10.42.42.5(pid=28368): Launched 23:34:23.111164 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:34:23.671532 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28370): Launched 23:34:23.786467 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:34:24.065935 run patchelf(pid=28371): Launched 23:34:24.254612 run osmo-stp_10.42.42.5(pid=28368): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28368)] 23:34:24.393180 run osmo-stp_10.42.42.5(pid=28368): stdout: | (launched: 2022-12-08_23:34:22.835200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:24.531490 run osmo-stp_10.42.42.5(pid=28368): stderr: | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233423031 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:24.664844 run osmo-stp_10.42.42.5(pid=28368): stdout: | (launched: 2022-12-08_23:34:22.835200) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:34:24.797029 run osmo-stp_10.42.42.5(pid=28368): stderr: | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221208233423030 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221208233423031 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221208233423031 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:34:24.950719 run patchelf(pid=28371): Terminating (SIGINT) 23:34:25.130661 run patchelf(pid=28371): Terminated: ok {rc=0} 23:34:25.163637 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=28368): Process ended prematurely: osmo-stp_10.42.42.5(pid=28368) [trial-2351↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28368)] [trial-2351↪gprs:trx-b200↪iperf3.py:8] 23:34:25.173810 tst iperf3.py:8: Test FAILED (7.7 sec) 23:34:25.235638 run osmo-hlr_10.42.42.2(pid=28365): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-b200↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=28365)] 23:34:25.286145 run osmo-hlr_10.42.42.2(pid=28365): stdout: | (launched: 2022-12-08_23:34:21.837272) 23:34:25.337090 run osmo-hlr_10.42.42.2(pid=28365): stderr: | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221208233422036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221208233422048 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-b200/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221208233422057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221208233422057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221208233422057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:34:25.380908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28360): Terminating (SIGTERM) 23:34:25.422369 run iperf3-srv_10.42.42.10(pid=28361): Terminating (SIGTERM) 23:34:25.463878 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28364): Terminating (SIGTERM) 23:34:25.505259 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28367): Terminating (SIGTERM) 23:34:25.547180 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28370): Terminating (SIGTERM) 23:34:25.557056 --- ParallelTerminationStrategy: PID 28360 died... 23:34:25.613748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=28360): Terminated: ok {rc=0} 23:34:25.623900 --- ParallelTerminationStrategy: PID 28361 died... 23:34:25.678632 run iperf3-srv_10.42.42.10(pid=28361): Terminated {rc=256} 23:34:25.688428 --- ParallelTerminationStrategy: PID 28364 died... 23:34:25.743079 run pcap-recorder_any(filters='host 10.42.42.2')(pid=28364): Terminated: ok {rc=0} 23:34:25.753504 --- ParallelTerminationStrategy: PID 28367 died... 23:34:25.808558 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=28367): Terminated: ok {rc=0} 23:34:25.818602 --- ParallelTerminationStrategy: PID 28370 died... 23:34:25.873436 run pcap-recorder_any(filters='host 10.42.42.6')(pid=28370): Terminated: ok {rc=0} 23:34:25.959841 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=28368): Process ended prematurely: osmo-stp_10.42.42.5(pid=28368) [trial-2351↪gprs:trx-b200↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=28368)]