Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=31854): Process ended prematurely: osmo-stp_10.42.42.5(pid=31854) [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31854)]
Standard Output
---------------------------------------------- trial-2351 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 00:07:53.399744 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:53.411012 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 00:07:53.551088 tst cs_paging_gprs_active.py: using LAC 17703 00:07:53.676781 tst cs_paging_gprs_active.py: using RAC 108 00:07:53.802778 tst cs_paging_gprs_active.py: using CellId 17703 00:07:53.928730 tst cs_paging_gprs_active.py: using BVCI 17704 00:07:53.953703 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:53.964850 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:53.975832 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:53.986807 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:53.998127 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:54.008837 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:54.020546 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:54.031730 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 00:07:54.043574 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:54.162273 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 00:07:54.448466 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:07:54.576204 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:54.893933 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31844): Launched 00:07:55.157565 run iperf3-srv_10.42.42.10(pid=31845): Launched 00:07:55.345510 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:07:55.473139 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:07:55.789685 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31846): Launched 00:07:56.053112 run iperf3-srv_10.42.42.10(pid=31847): Launched 00:07:56.240314 tst cs_paging_gprs_active.py:38: start network... 00:07:56.367648 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:07:56.858763 run create_hlr_db(pid=31848): Launched 00:07:57.034708 bus /sierra_2: Setting Powered False 00:07:58.056766 run create_hlr_db(pid=31848): Terminated: ok {rc=0} 00:07:58.489690 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31850): Launched 00:07:58.815957 run osmo-hlr_10.42.42.2(pid=31851): Launched 00:07:58.936895 run osmo-stp_10.42.42.5: Starting osmo-stp 00:07:59.504182 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31853): Launched 00:07:59.831451 run osmo-stp_10.42.42.5(pid=31854): Launched 00:07:59.951002 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:08:00.520263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31856): Launched 00:08:00.636727 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:08:00.946187 run patchelf(pid=31857): Launched 00:08:01.133395 run osmo-stp_10.42.42.5(pid=31854): ERR: Terminated: ERROR {rc=1} [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31854)] 00:08:01.296808 run osmo-stp_10.42.42.5(pid=31854): stdout: | (launched: 2022-12-09_00:07:59.670331) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:08:01.455421 run osmo-stp_10.42.42.5(pid=31854): stderr: | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000759864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:08:01.593491 run osmo-stp_10.42.42.5(pid=31854): stdout: | (launched: 2022-12-09_00:07:59.670331) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:08:01.728799 run osmo-stp_10.42.42.5(pid=31854): stderr: | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209000759863 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209000759864 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209000759864 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:08:01.880169 run patchelf(pid=31857): Terminating (SIGINT) 00:08:02.065879 run patchelf(pid=31857): Terminated: ok {rc=0} 00:08:02.105173 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31854): Process ended prematurely: osmo-stp_10.42.42.5(pid=31854) [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31854)] [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 00:08:02.119409 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 00:08:02.198904 run osmo-hlr_10.42.42.2(pid=31851): ERR: Terminated: ERROR {rc=237} [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31851)] 00:08:02.252561 run osmo-hlr_10.42.42.2(pid=31851): stdout: | (launched: 2022-12-09_00:07:58.655643) 00:08:02.303069 run osmo-hlr_10.42.42.2(pid=31851): stderr: | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209000758856 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209000758868 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2351/run.2022-12-08_23-11-41/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209000758877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209000758877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209000758877 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:08:02.346235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31844): Terminating (SIGTERM) 00:08:02.387493 run iperf3-srv_10.42.42.10(pid=31845): Terminating (SIGTERM) 00:08:02.427593 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31846): Terminating (SIGTERM) 00:08:02.468348 run iperf3-srv_10.42.42.10(pid=31847): Terminating (SIGTERM) 00:08:02.512155 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31850): Terminating (SIGTERM) 00:08:02.553641 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31853): Terminating (SIGTERM) 00:08:02.606798 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31856): Terminating (SIGTERM) 00:08:02.617846 --- ParallelTerminationStrategy: PID 31844 died... 00:08:02.675787 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31844): Terminated: ok {rc=0} 00:08:02.690335 --- ParallelTerminationStrategy: PID 31845 died... 00:08:02.749153 run iperf3-srv_10.42.42.10(pid=31845): Terminated {rc=256} 00:08:02.761264 --- ParallelTerminationStrategy: PID 31846 died... 00:08:02.816652 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31846): Terminated: ok {rc=0} 00:08:02.831339 --- ParallelTerminationStrategy: PID 31847 died... 00:08:02.887170 run iperf3-srv_10.42.42.10(pid=31847): Terminated {rc=256} 00:08:02.903478 --- ParallelTerminationStrategy: PID 31850 died... 00:08:02.964586 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31850): Terminated: ok {rc=0} 00:08:02.976808 --- ParallelTerminationStrategy: PID 31853 died... 00:08:03.035369 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31853): Terminated: ok {rc=0} 00:08:03.045928 --- ParallelTerminationStrategy: PID 31856 died... 00:08:03.104268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31856): Terminated: ok {rc=0} 00:08:03.200299 bus /gobi_0: Setting Powered False 00:08:04.308279 bus /gobi_0: Setting Powered False 00:08:05.418713 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31854): Process ended prematurely: osmo-stp_10.42.42.5(pid=31854) [trial-2351↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31854)]