Failed
gprs:nanobts+band-1900.ping_idle_ping.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=8350): Process ended prematurely: osmo-stp_10.42.42.5(pid=8350) [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)]
Standard Output
---------------------------------------------- trial-2352 gprs:nanobts+band-1900 ping_idle_ping.py ---------------------------------------------- 01:44:56.073672 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.085512 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 01:44:56.219910 tst ping_idle_ping.py: using LAC 18206 01:44:56.345506 tst ping_idle_ping.py: using RAC 101 01:44:56.472043 tst ping_idle_ping.py: using CellId 18206 01:44:56.597326 tst ping_idle_ping.py: using BVCI 18207 01:44:56.621762 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.632855 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.643854 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.654938 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.665846 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.676700 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.687781 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 01:44:56.698779 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 01:44:56.974834 tst ping_idle_ping.py:24: start network... 01:44:57.100301 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:44:57.576467 run create_hlr_db(pid=8344): Launched 01:44:57.750116 bus /gobi_6: Setting Powered False 01:44:58.771222 run create_hlr_db(pid=8344): Terminated: ok {rc=0} 01:44:59.171394 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Launched 01:44:59.472255 run osmo-hlr_10.42.42.2(pid=8347): Launched 01:44:59.590740 run osmo-stp_10.42.42.5: Starting osmo-stp 01:45:00.120118 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Launched 01:45:00.420453 run osmo-stp_10.42.42.5(pid=8350): Launched 01:45:00.532363 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:45:01.101992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Launched 01:45:01.238942 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:45:01.535644 run patchelf(pid=8356): Launched 01:45:01.737396 run osmo-stp_10.42.42.5(pid=8350): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)] 01:45:01.891101 run osmo-stp_10.42.42.5(pid=8350): stdout: | (launched: 2022-12-09_01:45:00.271906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:45:02.039724 run osmo-stp_10.42.42.5(pid=8350): stderr: | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014500443 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:45:02.177184 run osmo-stp_10.42.42.5(pid=8350): stdout: | (launched: 2022-12-09_01:45:00.271906) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:45:02.309337 run osmo-stp_10.42.42.5(pid=8350): stderr: | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209014500442 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209014500443 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209014500443 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:45:02.463155 run patchelf(pid=8356): Terminating (SIGINT) 01:45:02.643387 run patchelf(pid=8356): Terminated: ok {rc=0} 01:45:02.676037 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8350): Process ended prematurely: osmo-stp_10.42.42.5(pid=8350) [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)] [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27] 01:45:02.685624 tst ping_idle_ping.py:27: Test FAILED (6.6 sec) 01:45:02.749383 run osmo-hlr_10.42.42.2(pid=8347): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8347)] 01:45:02.801376 run osmo-hlr_10.42.42.2(pid=8347): stdout: | (launched: 2022-12-09_01:44:59.323394) 01:45:02.854026 run osmo-hlr_10.42.42.2(pid=8347): stderr: | �[0;m�[1;31m20221209014459496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209014459496 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209014459497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209014459497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209014459497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209014459497 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209014459508 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:nanobts+band-1900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209014459516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209014459517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209014459517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:45:02.899182 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Terminating (SIGTERM) 01:45:02.941728 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Terminating (SIGTERM) 01:45:02.984393 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Terminating (SIGTERM) 01:45:02.994482 --- ParallelTerminationStrategy: PID 8346 died... 01:45:03.051562 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8346): Terminated: ok {rc=0} 01:45:03.062288 --- ParallelTerminationStrategy: PID 8349 died... 01:45:03.119617 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8349): Terminated: ok {rc=0} 01:45:03.130032 --- ParallelTerminationStrategy: PID 8352 died... 01:45:03.186693 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8352): Terminated: ok {rc=0} 01:45:03.274965 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8350): Process ended prematurely: osmo-stp_10.42.42.5(pid=8350) [trial-2352↪gprs:nanobts+band-1900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8350)]