Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=3375): Process ended prematurely: osmo-stp_10.42.42.5(pid=3375) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3375)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 00:49:10.558661 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:10.570817 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:49:10.725737 tst ping_idle_ping.py: using LAC 17910 00:49:10.855685 tst ping_idle_ping.py: using RAC 60 00:49:10.985130 tst ping_idle_ping.py: using CellId 17910 00:49:11.119410 tst ping_idle_ping.py: using BVCI 17911 00:49:11.144509 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.155915 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.167106 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.178326 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.189408 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.200450 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.211761 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:49:11.223026 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:49:11.502714 tst ping_idle_ping.py:24: start network... 00:49:11.630664 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:49:12.117852 run create_hlr_db(pid=3369): Launched 00:49:12.296209 bus /gobi_6: Setting Powered False 00:49:13.315477 run create_hlr_db(pid=3369): Terminated: ok {rc=0} 00:49:13.727733 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3371): Launched 00:49:14.037688 run osmo-hlr_10.42.42.2(pid=3372): Launched 00:49:14.155266 run osmo-stp_10.42.42.5: Starting osmo-stp 00:49:14.700893 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3374): Launched 00:49:15.010352 run osmo-stp_10.42.42.5(pid=3375): Launched 00:49:15.122433 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:49:15.662345 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3377): Launched 00:49:15.771982 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:49:16.140527 run patchelf(pid=3378): Launched 00:49:16.342873 run osmo-stp_10.42.42.5(pid=3375): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3375)] 00:49:16.478942 run osmo-stp_10.42.42.5(pid=3375): stdout: | (launched: 2022-12-09_00:49:14.856817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:16.615388 run osmo-stp_10.42.42.5(pid=3375): stderr: | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004915029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:16.746078 run osmo-stp_10.42.42.5(pid=3375): stdout: | (launched: 2022-12-09_00:49:14.856817) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:16.875496 run osmo-stp_10.42.42.5(pid=3375): stderr: | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004915028 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004915029 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004915029 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:17.026424 run patchelf(pid=3378): Terminating (SIGINT) 00:49:17.203559 run patchelf(pid=3378): Terminated: ok {rc=0} 00:49:17.235754 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=3375): Process ended prematurely: osmo-stp_10.42.42.5(pid=3375) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3375)] [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 00:49:17.244918 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 00:49:17.306701 run osmo-hlr_10.42.42.2(pid=3372): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3372)] 00:49:17.356927 run osmo-hlr_10.42.42.2(pid=3372): stdout: | (launched: 2022-12-09_00:49:13.883970) 00:49:17.407792 run osmo-hlr_10.42.42.2(pid=3372): stderr: | �[0;m�[1;31m20221209004914065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004914065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004914065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004914065 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004914066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004914066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004914078 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004914086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004914086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004914086 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:49:17.450791 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3371): Terminating (SIGTERM) 00:49:17.491961 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3374): Terminating (SIGTERM) 00:49:17.532811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3377): Terminating (SIGTERM) 00:49:17.542475 --- ParallelTerminationStrategy: PID 3371 died... 00:49:17.597120 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3371): Terminated: ok {rc=0} 00:49:17.606967 --- ParallelTerminationStrategy: PID 3374 died... 00:49:17.661672 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3374): Terminated: ok {rc=0} 00:49:17.671755 --- ParallelTerminationStrategy: PID 3377 died... 00:49:17.725869 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3377): Terminated: ok {rc=0} 00:49:17.815062 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3375): Process ended prematurely: osmo-stp_10.42.42.5(pid=3375) [trial-2352↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3375)]