Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3255): Process ended prematurely: osmo-stp_10.42.42.5(pid=3255) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3255)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 00:47:17.663627 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:17.674927 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 00:47:17.811337 tst cs_paging_gprs_active.py: using LAC 17901 00:47:17.937126 tst cs_paging_gprs_active.py: using RAC 51 00:47:18.061434 tst cs_paging_gprs_active.py: using CellId 17901 00:47:18.186088 tst cs_paging_gprs_active.py: using BVCI 17902 00:47:18.210559 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.221597 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.232092 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.243413 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.254340 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.265320 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.276360 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.287295 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 00:47:18.298274 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:47:18.417303 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 00:47:18.703540 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:47:18.833689 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:19.158731 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Launched 00:47:19.429190 run iperf3-srv_10.42.42.10(pid=3246): Launched 00:47:19.619973 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:47:19.750213 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:20.075585 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3247): Launched 00:47:20.346399 run iperf3-srv_10.42.42.10(pid=3248): Launched 00:47:20.537209 tst cs_paging_gprs_active.py:38: start network... 00:47:20.667233 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:47:21.159035 run create_hlr_db(pid=3249): Launched 00:47:21.338454 bus /gobi_6: Setting Powered False 00:47:22.358801 run create_hlr_db(pid=3249): Terminated: ok {rc=0} 00:47:22.775498 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3251): Launched 00:47:23.090131 run osmo-hlr_10.42.42.2(pid=3252): Launched 00:47:23.211675 run osmo-stp_10.42.42.5: Starting osmo-stp 00:47:23.761529 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3254): Launched 00:47:24.077761 run osmo-stp_10.42.42.5(pid=3255): Launched 00:47:24.201695 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:47:24.750992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3257): Launched 00:47:24.862587 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:47:25.136506 run patchelf(pid=3258): Launched 00:47:25.319464 run osmo-stp_10.42.42.5(pid=3255): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3255)] 00:47:25.453508 run osmo-stp_10.42.42.5(pid=3255): stdout: | (launched: 2022-12-09_00:47:23.919897) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:25.588047 run osmo-stp_10.42.42.5(pid=3255): stderr: | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004724096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:25.717419 run osmo-stp_10.42.42.5(pid=3255): stdout: | (launched: 2022-12-09_00:47:23.919897) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:47:25.845391 run osmo-stp_10.42.42.5(pid=3255): stderr: | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004724095 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004724096 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004724096 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:47:25.994647 run patchelf(pid=3258): Terminating (SIGINT) 00:47:26.170609 run patchelf(pid=3258): Terminated: ok {rc=0} 00:47:26.202856 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3255): Process ended prematurely: osmo-stp_10.42.42.5(pid=3255) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3255)] [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 00:47:26.212050 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:47:26.273717 run osmo-hlr_10.42.42.2(pid=3252): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3252)] 00:47:26.323895 run osmo-hlr_10.42.42.2(pid=3252): stdout: | (launched: 2022-12-09_00:47:22.933907) 00:47:26.374547 run osmo-hlr_10.42.42.2(pid=3252): stderr: | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004723113 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004723125 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004723134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004723134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004723134 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:47:26.417465 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Terminating (SIGTERM) 00:47:26.458149 run iperf3-srv_10.42.42.10(pid=3246): Terminating (SIGTERM) 00:47:26.498708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3247): Terminating (SIGTERM) 00:47:26.539254 run iperf3-srv_10.42.42.10(pid=3248): Terminating (SIGTERM) 00:47:26.579908 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3251): Terminating (SIGTERM) 00:47:26.620434 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3254): Terminating (SIGTERM) 00:47:26.661053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3257): Terminating (SIGTERM) 00:47:26.670603 --- ParallelTerminationStrategy: PID 3245 died... 00:47:26.725073 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3245): Terminated: ok {rc=0} 00:47:26.734695 --- ParallelTerminationStrategy: PID 3246 died... 00:47:26.788497 run iperf3-srv_10.42.42.10(pid=3246): Terminated {rc=256} 00:47:26.798129 --- ParallelTerminationStrategy: PID 3247 died... 00:47:26.852502 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3247): Terminated: ok {rc=0} 00:47:26.862094 --- ParallelTerminationStrategy: PID 3248 died... 00:47:26.915559 run iperf3-srv_10.42.42.10(pid=3248): Terminated {rc=256} 00:47:26.925786 --- ParallelTerminationStrategy: PID 3251 died... 00:47:26.979430 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3251): Terminated: ok {rc=0} 00:47:26.989314 --- ParallelTerminationStrategy: PID 3254 died... 00:47:27.043157 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3254): Terminated: ok {rc=0} 00:47:27.053313 --- ParallelTerminationStrategy: PID 3257 died... 00:47:27.107392 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3257): Terminated: ok {rc=0} 00:47:27.198643 bus /gobi_0: Setting Powered False 00:47:28.304141 bus /gobi_0: Setting Powered False 00:47:29.418442 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3255): Process ended prematurely: osmo-stp_10.42.42.5(pid=3255) [trial-2352↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3255)]