Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=3187): Process ended prematurely: osmo-stp_10.42.42.5(pid=3187) [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3187)]
Standard Output
---------------------------------------------- trial-2352 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 00:46:16.147840 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.162888 tst gprs:sysmo: Using 1 x bts (candidates: 1) 00:46:16.329816 tst cs_paging_gprs_active.py: using LAC 17896 00:46:16.490522 tst cs_paging_gprs_active.py: using RAC 46 00:46:16.650767 tst cs_paging_gprs_active.py: using CellId 17896 00:46:16.782915 tst cs_paging_gprs_active.py: using BVCI 17897 00:46:16.808792 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.820632 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.832448 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.849211 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.861088 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.872566 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.887266 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.899547 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 00:46:16.911454 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:46:17.055696 tst gprs:sysmo: Using 1 x modem (candidates: 4) 00:46:17.370187 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:46:17.502525 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:17.826639 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3177): Launched 00:46:18.095989 run iperf3-srv_10.42.42.10(pid=3178): Launched 00:46:18.286431 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:46:18.416423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:46:18.740313 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3179): Launched 00:46:19.009745 run iperf3-srv_10.42.42.10(pid=3180): Launched 00:46:19.199239 tst cs_paging_gprs_active.py:38: start network... 00:46:19.328364 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:46:19.818356 run create_hlr_db(pid=3181): Launched 00:46:19.997321 bus /sierra_2: Setting Powered False 00:46:21.018074 run create_hlr_db(pid=3181): Terminated: ok {rc=0} 00:46:21.434588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3183): Launched 00:46:21.748403 run osmo-hlr_10.42.42.2(pid=3184): Launched 00:46:21.871190 run osmo-stp_10.42.42.5: Starting osmo-stp 00:46:22.423071 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3186): Launched 00:46:22.735220 run osmo-stp_10.42.42.5(pid=3187): Launched 00:46:22.849868 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:46:24.373137 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3189): Launched 00:46:24.484357 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:46:24.758198 run patchelf(pid=3190): Launched 00:46:24.941279 run osmo-stp_10.42.42.5(pid=3187): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3187)] 00:46:25.075198 run osmo-stp_10.42.42.5(pid=3187): stdout: | (launched: 2022-12-09_00:46:22.580502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:25.209872 run osmo-stp_10.42.42.5(pid=3187): stderr: | �[0;m�[38;5;43m20221209004622754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004622754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004622755 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004622755 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004622755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004622756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004622756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:25.339195 run osmo-stp_10.42.42.5(pid=3187): stdout: | (launched: 2022-12-09_00:46:22.580502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:46:25.466874 run osmo-stp_10.42.42.5(pid=3187): stderr: | �[0;m�[38;5;43m20221209004622754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209004622754 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209004622755 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209004622755 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209004622755 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209004622756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209004622756 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:46:25.615820 run patchelf(pid=3190): Terminating (SIGINT) 00:46:25.791229 run patchelf(pid=3190): Terminated: ok {rc=0} 00:46:25.823408 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3187): Process ended prematurely: osmo-stp_10.42.42.5(pid=3187) [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3187)] [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py:38] 00:46:25.832606 tst cs_paging_gprs_active.py:38: Test FAILED (9.7 sec) 00:46:25.894455 run osmo-hlr_10.42.42.2(pid=3184): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3184)] 00:46:25.944083 run osmo-hlr_10.42.42.2(pid=3184): stdout: | (launched: 2022-12-09_00:46:21.593261) 00:46:25.994262 run osmo-hlr_10.42.42.2(pid=3184): stderr: | �[0;m�[1;31m20221209004621773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209004621773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209004621773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209004621773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209004621773 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209004621774 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209004621786 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209004621794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209004621794 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209004621795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:46:26.036908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3177): Terminating (SIGTERM) 00:46:26.077470 run iperf3-srv_10.42.42.10(pid=3178): Terminating (SIGTERM) 00:46:26.117929 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3179): Terminating (SIGTERM) 00:46:26.158271 run iperf3-srv_10.42.42.10(pid=3180): Terminating (SIGTERM) 00:46:26.198411 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3183): Terminating (SIGTERM) 00:46:26.238710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3186): Terminating (SIGTERM) 00:46:26.279165 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3189): Terminating (SIGTERM) 00:46:26.288613 --- ParallelTerminationStrategy: PID 3177 died... 00:46:26.342960 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3177): Terminated: ok {rc=0} 00:46:26.352850 --- ParallelTerminationStrategy: PID 3178 died... 00:46:26.406811 run iperf3-srv_10.42.42.10(pid=3178): Terminated {rc=256} 00:46:26.416681 --- ParallelTerminationStrategy: PID 3179 died... 00:46:26.470979 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3179): Terminated: ok {rc=0} 00:46:26.480680 --- ParallelTerminationStrategy: PID 3180 died... 00:46:26.534629 run iperf3-srv_10.42.42.10(pid=3180): Terminated {rc=256} 00:46:26.544227 --- ParallelTerminationStrategy: PID 3183 died... 00:46:26.598696 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3183): Terminated: ok {rc=0} 00:46:26.608451 --- ParallelTerminationStrategy: PID 3186 died... 00:46:26.662229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3186): Terminated: ok {rc=0} 00:46:26.672533 --- ParallelTerminationStrategy: PID 3189 died... 00:46:26.726645 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3189): Terminated: ok {rc=0} 00:46:26.811467 bus /gobi_0: Setting Powered False 00:46:27.920536 bus /gobi_0: Setting Powered False 00:46:29.033984 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3187): Process ended prematurely: osmo-stp_10.42.42.5(pid=3187) [trial-2352↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3187)]