Failed
gprs:trx-b200+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4750): Process ended prematurely: osmo-stp_10.42.42.5(pid=4750) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4750)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:04:53.963367 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:53.974187 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:04:54.136691 tst cs_paging_gprs_active.py: using LAC 17994 01:04:54.256426 tst cs_paging_gprs_active.py: using RAC 144 01:04:54.377405 tst cs_paging_gprs_active.py: using CellId 17994 01:04:54.504501 tst cs_paging_gprs_active.py: using BVCI 17995 01:04:54.529825 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.541195 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.552613 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.564060 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.575179 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.586428 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.597709 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.608788 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:04:54.620051 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:04:54.735302 tst gprs:trx-b200+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:04:55.033362 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:04:55.169838 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:04:55.510078 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4740): Launched 01:04:55.792137 run iperf3-srv_10.42.42.10(pid=4741): Launched 01:04:55.993305 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:04:56.129975 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:04:56.470131 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4742): Launched 01:04:56.753126 run iperf3-srv_10.42.42.10(pid=4743): Launched 01:04:56.954699 tst cs_paging_gprs_active.py:38: start network... 01:04:57.091589 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:04:57.615552 run create_hlr_db(pid=4744): Launched 01:04:57.804738 bus /gobi_6: Setting Powered False 01:04:58.825991 run create_hlr_db(pid=4744): Terminated: ok {rc=0} 01:04:59.237434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4746): Launched 01:04:59.544765 run osmo-hlr_10.42.42.2(pid=4747): Launched 01:04:59.658558 run osmo-stp_10.42.42.5: Starting osmo-stp 01:05:00.191366 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4749): Launched 01:05:00.497724 run osmo-stp_10.42.42.5(pid=4750): Launched 01:05:00.609505 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:05:01.209719 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4752): Launched 01:05:01.321896 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:05:01.626347 run patchelf(pid=4756): Launched 01:05:01.860647 run osmo-stp_10.42.42.5(pid=4750): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4750)] 01:05:01.996300 run osmo-stp_10.42.42.5(pid=4750): stdout: | (launched: 2022-12-09_01:05:00.346214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:05:02.133585 run osmo-stp_10.42.42.5(pid=4750): stderr: | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010500517 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:05:02.263811 run osmo-stp_10.42.42.5(pid=4750): stdout: | (launched: 2022-12-09_01:05:00.346214) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:05:02.389256 run osmo-stp_10.42.42.5(pid=4750): stderr: | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010500516 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010500517 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010500517 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:05:02.535545 run patchelf(pid=4756): Terminating (SIGINT) 01:05:02.707559 run patchelf(pid=4756): Terminated: ok {rc=0} 01:05:02.738963 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4750): Process ended prematurely: osmo-stp_10.42.42.5(pid=4750) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4750)] [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:05:02.748208 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:05:02.809924 run osmo-hlr_10.42.42.2(pid=4747): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4747)] 01:05:02.859919 run osmo-hlr_10.42.42.2(pid=4747): stdout: | (launched: 2022-12-09_01:04:59.392134) 01:05:02.910483 run osmo-hlr_10.42.42.2(pid=4747): stderr: | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010459569 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010459580 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010459588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010459588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010459588 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:05:02.954764 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4740): Terminating (SIGTERM) 01:05:02.995213 run iperf3-srv_10.42.42.10(pid=4741): Terminating (SIGTERM) 01:05:03.035564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4742): Terminating (SIGTERM) 01:05:03.075871 run iperf3-srv_10.42.42.10(pid=4743): Terminating (SIGTERM) 01:05:03.116340 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4746): Terminating (SIGTERM) 01:05:03.156475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4749): Terminating (SIGTERM) 01:05:03.196865 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4752): Terminating (SIGTERM) 01:05:03.206379 --- ParallelTerminationStrategy: PID 4740 died... 01:05:03.260144 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4740): Terminated: ok {rc=0} 01:05:03.270115 --- ParallelTerminationStrategy: PID 4741 died... 01:05:03.323482 run iperf3-srv_10.42.42.10(pid=4741): Terminated {rc=256} 01:05:03.333289 --- ParallelTerminationStrategy: PID 4742 died... 01:05:03.387069 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4742): Terminated: ok {rc=0} 01:05:03.396930 --- ParallelTerminationStrategy: PID 4743 died... 01:05:03.450344 run iperf3-srv_10.42.42.10(pid=4743): Terminated {rc=256} 01:05:03.460086 --- ParallelTerminationStrategy: PID 4746 died... 01:05:03.513931 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4746): Terminated: ok {rc=0} 01:05:03.523546 --- ParallelTerminationStrategy: PID 4749 died... 01:05:03.577132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4749): Terminated: ok {rc=0} 01:05:03.586920 --- ParallelTerminationStrategy: PID 4752 died... 01:05:03.640330 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4752): Terminated: ok {rc=0} 01:05:03.729266 bus /gobi_0: Setting Powered False 01:05:04.833625 bus /gobi_0: Setting Powered False 01:05:05.946557 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4750): Process ended prematurely: osmo-stp_10.42.42.5(pid=4750) [trial-2352↪gprs:trx-b200+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4750)]