Failed
gprs:trx-b200+mod-bts0-egprs.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=4733): Process ended prematurely: osmo-stp_10.42.42.5(pid=4733) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4733)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200+mod-bts0-egprs ping_idle_ping.py ---------------------------------------------- 01:04:44.418590 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:44.431196 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:04:44.579253 tst ping_idle_ping.py: using LAC 17993 01:04:44.707813 tst ping_idle_ping.py: using RAC 143 01:04:44.834311 tst ping_idle_ping.py: using CellId 17993 01:04:44.960677 tst ping_idle_ping.py: using BVCI 17994 01:04:44.985610 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:44.997194 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.008514 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.019836 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.031072 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.042233 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.053474 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:04:45.064429 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:04:45.357756 tst ping_idle_ping.py:24: start network... 01:04:45.492581 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:04:46.057513 run create_hlr_db(pid=4727): Launched 01:04:46.249160 bus /gobi_6: Setting Powered False 01:04:47.258693 run create_hlr_db(pid=4727): Terminated: ok {rc=0} 01:04:47.699382 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4729): Launched 01:04:48.023446 run osmo-hlr_10.42.42.2(pid=4730): Launched 01:04:48.142905 run osmo-stp_10.42.42.5: Starting osmo-stp 01:04:48.708059 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4732): Launched 01:04:49.035003 run osmo-stp_10.42.42.5(pid=4733): Launched 01:04:49.152183 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:04:49.717348 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4735): Launched 01:04:49.832757 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:04:50.116410 run patchelf(pid=4736): Launched 01:04:50.305675 run osmo-stp_10.42.42.5(pid=4733): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4733)] 01:04:50.444523 run osmo-stp_10.42.42.5(pid=4733): stdout: | (launched: 2022-12-09_01:04:48.872491) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:50.583184 run osmo-stp_10.42.42.5(pid=4733): stderr: | �[0;m�[38;5;43m20221209010449066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010449066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010449067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010449067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010449069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010449070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010449070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:50.716919 run osmo-stp_10.42.42.5(pid=4733): stdout: | (launched: 2022-12-09_01:04:48.872491) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:04:50.849376 run osmo-stp_10.42.42.5(pid=4733): stderr: | �[0;m�[38;5;43m20221209010449066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010449066 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010449067 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010449067 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010449069 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010449070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010449070 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:04:51.004556 run patchelf(pid=4736): Terminating (SIGINT) 01:04:51.185866 run patchelf(pid=4736): Terminated: ok {rc=0} 01:04:51.218647 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=4733): Process ended prematurely: osmo-stp_10.42.42.5(pid=4733) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4733)] [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27] 01:04:51.227898 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 01:04:51.291765 run osmo-hlr_10.42.42.2(pid=4730): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4730)] 01:04:51.344110 run osmo-hlr_10.42.42.2(pid=4730): stdout: | (launched: 2022-12-09_01:04:47.863305) 01:04:51.397204 run osmo-hlr_10.42.42.2(pid=4730): stderr: | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010448062 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010448075 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200+mod-bts0-egprs/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010448083 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010448084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010448084 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:04:51.442388 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4729): Terminating (SIGTERM) 01:04:51.485114 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4732): Terminating (SIGTERM) 01:04:51.527917 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4735): Terminating (SIGTERM) 01:04:51.538035 --- ParallelTerminationStrategy: PID 4729 died... 01:04:51.594753 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4729): Terminated: ok {rc=0} 01:04:51.605269 --- ParallelTerminationStrategy: PID 4732 died... 01:04:51.661754 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4732): Terminated: ok {rc=0} 01:04:51.672087 --- ParallelTerminationStrategy: PID 4735 died... 01:04:51.728544 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4735): Terminated: ok {rc=0} 01:04:51.815702 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4733): Process ended prematurely: osmo-stp_10.42.42.5(pid=4733) [trial-2352↪gprs:trx-b200+mod-bts0-egprs↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4733)]