Failed
gprs:trx-b200.ping.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=4651): Process ended prematurely: osmo-stp_10.42.42.5(pid=4651) [trial-2352↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4651)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-b200 ping.py ---------------------------------------------- 01:03:35.555958 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:35.567971 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 01:03:35.712220 tst ping.py: using LAC 17987 01:03:35.839792 tst ping.py: using RAC 137 01:03:35.965426 tst ping.py: using CellId 17987 01:03:36.097086 tst ping.py: using BVCI 17988 01:03:36.121710 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.132759 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.143720 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.154647 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.165481 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.176284 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.187299 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:03:36.198297 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:03:36.488029 tst ping.py:19: start network... 01:03:36.622151 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:03:37.134791 run create_hlr_db(pid=4644): Launched 01:03:37.321685 bus /gobi_6: Setting Powered False 01:03:38.341287 run create_hlr_db(pid=4644): Terminated: ok {rc=0} 01:03:38.769561 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4647): Launched 01:03:39.094077 run osmo-hlr_10.42.42.2(pid=4648): Launched 01:03:39.210948 run osmo-stp_10.42.42.5: Starting osmo-stp 01:03:39.775218 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4650): Launched 01:03:40.099053 run osmo-stp_10.42.42.5(pid=4651): Launched 01:03:40.215686 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:03:40.777259 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4653): Launched 01:03:40.893053 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:03:41.175595 run patchelf(pid=4654): Launched 01:03:41.364333 run osmo-stp_10.42.42.5(pid=4651): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4651)] 01:03:41.502849 run osmo-stp_10.42.42.5(pid=4651): stdout: | (launched: 2022-12-09_01:03:39.939478) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:41.641427 run osmo-stp_10.42.42.5(pid=4651): stderr: | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010340135 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:41.774905 run osmo-stp_10.42.42.5(pid=4651): stdout: | (launched: 2022-12-09_01:03:39.939478) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:03:41.907572 run osmo-stp_10.42.42.5(pid=4651): stderr: | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209010340135 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209010340135 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209010340136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:03:42.061078 run patchelf(pid=4654): Terminating (SIGINT) 01:03:42.241021 run patchelf(pid=4654): Terminated: ok {rc=0} 01:03:42.273741 tst ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=4651): Process ended prematurely: osmo-stp_10.42.42.5(pid=4651) [trial-2352↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4651)] [trial-2352↪gprs:trx-b200↪ping.py:22] 01:03:42.283131 tst ping.py:22: Test FAILED (6.7 sec) 01:03:42.346719 run osmo-hlr_10.42.42.2(pid=4648): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-b200↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4648)] 01:03:42.398935 run osmo-hlr_10.42.42.2(pid=4648): stdout: | (launched: 2022-12-09_01:03:38.933675) 01:03:42.451723 run osmo-hlr_10.42.42.2(pid=4648): stderr: | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209010339136 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209010339149 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-b200/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209010339157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209010339157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209010339157 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:03:42.496627 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4647): Terminating (SIGTERM) 01:03:42.539108 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4650): Terminating (SIGTERM) 01:03:42.581414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4653): Terminating (SIGTERM) 01:03:42.591202 --- ParallelTerminationStrategy: PID 4647 died... 01:03:42.648134 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4647): Terminated: ok {rc=0} 01:03:42.658354 --- ParallelTerminationStrategy: PID 4650 died... 01:03:42.715166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4650): Terminated: ok {rc=0} 01:03:42.725548 --- ParallelTerminationStrategy: PID 4653 died... 01:03:42.781673 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4653): Terminated: ok {rc=0} 01:03:42.870245 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4651): Process ended prematurely: osmo-stp_10.42.42.5(pid=4651) [trial-2352↪gprs:trx-b200↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4651)]