Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=7044): Process ended prematurely: osmo-stp_10.42.42.5(pid=7044) [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7044)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 01:30:03.965065 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:03.976086 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 01:30:04.117270 tst cs_paging_gprs_active.py: using LAC 18127 01:30:04.243760 tst cs_paging_gprs_active.py: using RAC 22 01:30:04.370007 tst cs_paging_gprs_active.py: using CellId 18127 01:30:04.497098 tst cs_paging_gprs_active.py: using BVCI 18128 01:30:04.522233 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.533775 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.545072 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.556167 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.567191 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.578309 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.589556 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.600473 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 01:30:04.612066 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:30:04.729968 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 01:30:05.010933 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:30:05.138742 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:30:05.457195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7034): Launched 01:30:05.720188 run iperf3-srv_10.42.42.10(pid=7035): Launched 01:30:05.906367 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:30:06.034043 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:30:06.350664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7036): Launched 01:30:06.613801 run iperf3-srv_10.42.42.10(pid=7037): Launched 01:30:06.799799 tst cs_paging_gprs_active.py:38: start network... 01:30:06.926785 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:30:07.406731 run create_hlr_db(pid=7038): Launched 01:30:07.582102 bus /gobi_6: Setting Powered False 01:30:08.603367 run create_hlr_db(pid=7038): Terminated: ok {rc=0} 01:30:09.037335 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7040): Launched 01:30:09.364418 run osmo-hlr_10.42.42.2(pid=7041): Launched 01:30:09.486448 run osmo-stp_10.42.42.5: Starting osmo-stp 01:30:10.053776 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7043): Launched 01:30:10.380464 run osmo-stp_10.42.42.5(pid=7044): Launched 01:30:10.497879 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:30:11.066473 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7046): Launched 01:30:11.182949 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:30:11.467620 run patchelf(pid=7047): Launched 01:30:11.660006 run osmo-stp_10.42.42.5(pid=7044): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7044)] 01:30:11.799567 run osmo-stp_10.42.42.5(pid=7044): stdout: | (launched: 2022-12-09_01:30:10.219012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:30:11.939498 run osmo-stp_10.42.42.5(pid=7044): stderr: | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013010411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:30:12.075073 run osmo-stp_10.42.42.5(pid=7044): stdout: | (launched: 2022-12-09_01:30:10.219012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:30:12.208067 run osmo-stp_10.42.42.5(pid=7044): stderr: | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209013010410 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209013010411 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209013010411 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:30:12.363909 run patchelf(pid=7047): Terminating (SIGINT) 01:30:12.547007 run patchelf(pid=7047): Terminated: ok {rc=0} 01:30:12.580587 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7044): Process ended prematurely: osmo-stp_10.42.42.5(pid=7044) [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7044)] [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 01:30:12.590590 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:30:12.654127 run osmo-hlr_10.42.42.2(pid=7041): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7041)] 01:30:12.705985 run osmo-hlr_10.42.42.2(pid=7041): stdout: | (launched: 2022-12-09_01:30:09.203565) 01:30:12.758052 run osmo-hlr_10.42.42.2(pid=7041): stderr: | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209013009403 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209013009417 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209013009425 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209013009426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209013009426 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:30:12.802573 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7034): Terminating (SIGTERM) 01:30:12.844265 run iperf3-srv_10.42.42.10(pid=7035): Terminating (SIGTERM) 01:30:12.886658 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7036): Terminating (SIGTERM) 01:30:12.928518 run iperf3-srv_10.42.42.10(pid=7037): Terminating (SIGTERM) 01:30:12.970572 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7040): Terminating (SIGTERM) 01:30:13.012543 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7043): Terminating (SIGTERM) 01:30:13.054501 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7046): Terminating (SIGTERM) 01:30:13.064276 --- ParallelTerminationStrategy: PID 7034 died... 01:30:13.120506 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7034): Terminated: ok {rc=0} 01:30:13.130811 --- ParallelTerminationStrategy: PID 7035 died... 01:30:13.186274 run iperf3-srv_10.42.42.10(pid=7035): Terminated {rc=256} 01:30:13.196421 --- ParallelTerminationStrategy: PID 7036 died... 01:30:13.251956 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7036): Terminated: ok {rc=0} 01:30:13.262131 --- ParallelTerminationStrategy: PID 7037 died... 01:30:13.317734 run iperf3-srv_10.42.42.10(pid=7037): Terminated {rc=256} 01:30:13.327836 --- ParallelTerminationStrategy: PID 7040 died... 01:30:13.383746 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7040): Terminated: ok {rc=0} 01:30:13.393946 --- ParallelTerminationStrategy: PID 7043 died... 01:30:13.450025 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7043): Terminated: ok {rc=0} 01:30:13.460430 --- ParallelTerminationStrategy: PID 7046 died... 01:30:13.516086 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7046): Terminated: ok {rc=0} 01:30:13.602660 bus /gobi_0: Setting Powered False 01:30:14.710416 bus /gobi_0: Setting Powered False 01:30:15.821104 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7044): Process ended prematurely: osmo-stp_10.42.42.5(pid=7044) [trial-2352↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7044)]