Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=5639): Process ended prematurely: osmo-stp_10.42.42.5(pid=5639) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5639)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:13:50.163088 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.174239 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:13:50.341622 tst cs_paging_gprs_active.py: using LAC 18041 01:13:50.472597 tst cs_paging_gprs_active.py: using RAC 191 01:13:50.602802 tst cs_paging_gprs_active.py: using CellId 18041 01:13:50.731284 tst cs_paging_gprs_active.py: using BVCI 18042 01:13:50.756583 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.768103 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.779433 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.790748 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.802023 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.813251 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.824658 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.835744 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:50.847108 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:13:50.967670 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:13:51.266575 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:13:51.403943 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:51.745520 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5629): Launched 01:13:52.027811 run iperf3-srv_10.42.42.10(pid=5630): Launched 01:13:52.230354 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:13:52.368477 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:52.709467 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5631): Launched 01:13:52.992625 run iperf3-srv_10.42.42.10(pid=5632): Launched 01:13:53.195134 tst cs_paging_gprs_active.py:38: start network... 01:13:53.333101 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:13:53.860433 run create_hlr_db(pid=5633): Launched 01:13:54.051984 bus /gobi_6: Setting Powered False 01:13:55.072374 run create_hlr_db(pid=5633): Terminated: ok {rc=0} 01:13:55.486889 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5635): Launched 01:13:55.795965 run osmo-hlr_10.42.42.2(pid=5636): Launched 01:13:55.907939 run osmo-stp_10.42.42.5: Starting osmo-stp 01:13:56.443488 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5638): Launched 01:13:56.752003 run osmo-stp_10.42.42.5(pid=5639): Launched 01:13:56.866096 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:13:57.403131 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5641): Launched 01:13:57.512878 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:13:57.781766 run patchelf(pid=5642): Launched 01:13:57.962214 run osmo-stp_10.42.42.5(pid=5639): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5639)] 01:13:58.094403 run osmo-stp_10.42.42.5(pid=5639): stdout: | (launched: 2022-12-09_01:13:56.599789) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:58.226929 run osmo-stp_10.42.42.5(pid=5639): stderr: | �[0;m�[38;5;43m20221209011356769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011356769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011356770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011356770 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011356770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011356771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011356771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:58.354830 run osmo-stp_10.42.42.5(pid=5639): stdout: | (launched: 2022-12-09_01:13:56.599789) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:58.480790 run osmo-stp_10.42.42.5(pid=5639): stderr: | �[0;m�[38;5;43m20221209011356769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011356769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011356770 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011356770 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011356770 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011356771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011356771 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:58.627595 run patchelf(pid=5642): Terminating (SIGINT) 01:13:58.800549 run patchelf(pid=5642): Terminated: ok {rc=0} 01:13:58.832474 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5639): Process ended prematurely: osmo-stp_10.42.42.5(pid=5639) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5639)] [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:13:58.841927 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:13:58.903176 run osmo-hlr_10.42.42.2(pid=5636): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5636)] 01:13:58.952726 run osmo-hlr_10.42.42.2(pid=5636): stdout: | (launched: 2022-12-09_01:13:55.643256) 01:13:59.003685 run osmo-hlr_10.42.42.2(pid=5636): stderr: | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209011355820 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209011355863 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209011355873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209011355873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209011355873 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:13:59.046245 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5629): Terminating (SIGTERM) 01:13:59.086904 run iperf3-srv_10.42.42.10(pid=5630): Terminating (SIGTERM) 01:13:59.127055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5631): Terminating (SIGTERM) 01:13:59.167287 run iperf3-srv_10.42.42.10(pid=5632): Terminating (SIGTERM) 01:13:59.207649 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5635): Terminating (SIGTERM) 01:13:59.247856 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5638): Terminating (SIGTERM) 01:13:59.288098 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5641): Terminating (SIGTERM) 01:13:59.297629 --- ParallelTerminationStrategy: PID 5629 died... 01:13:59.351686 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5629): Terminated: ok {rc=0} 01:13:59.361369 --- ParallelTerminationStrategy: PID 5630 died... 01:13:59.415201 run iperf3-srv_10.42.42.10(pid=5630): Terminated {rc=256} 01:13:59.424768 --- ParallelTerminationStrategy: PID 5631 died... 01:13:59.478193 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5631): Terminated: ok {rc=0} 01:13:59.488008 --- ParallelTerminationStrategy: PID 5632 died... 01:13:59.541499 run iperf3-srv_10.42.42.10(pid=5632): Terminated {rc=256} 01:13:59.551123 --- ParallelTerminationStrategy: PID 5635 died... 01:13:59.604598 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5635): Terminated: ok {rc=0} 01:13:59.614419 --- ParallelTerminationStrategy: PID 5638 died... 01:13:59.667878 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5638): Terminated: ok {rc=0} 01:13:59.677708 --- ParallelTerminationStrategy: PID 5641 died... 01:13:59.731015 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5641): Terminated: ok {rc=0} 01:13:59.815901 bus /gobi_0: Setting Powered False 01:14:00.950992 bus /gobi_0: Setting Powered False 01:14:02.062634 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5639): Process ended prematurely: osmo-stp_10.42.42.5(pid=5639) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5639)]