Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5710): Process ended prematurely: osmo-stp_10.42.42.5(pid=5710) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5710)]
Standard Output
---------------------------------------------- trial-2352 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 01:14:50.401676 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:50.413219 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 01:14:50.581662 tst cs_paging_gprs_active.py: using LAC 18046 01:14:50.710566 tst cs_paging_gprs_active.py: using RAC 196 01:14:50.838842 tst cs_paging_gprs_active.py: using CellId 18046 01:14:50.964890 tst cs_paging_gprs_active.py: using BVCI 18047 01:14:50.990282 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.001910 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.013324 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.024691 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.036113 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.047502 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.058980 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.070295 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 01:14:51.081876 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:14:51.198848 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 01:14:51.482081 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:14:51.610836 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:14:51.930292 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5700): Launched 01:14:52.195623 run iperf3-srv_10.42.42.10(pid=5701): Launched 01:14:52.384048 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:14:52.513004 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:14:52.834235 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5702): Launched 01:14:53.100739 run iperf3-srv_10.42.42.10(pid=5703): Launched 01:14:53.288436 tst cs_paging_gprs_active.py:38: start network... 01:14:53.416642 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:14:53.901254 run create_hlr_db(pid=5704): Launched 01:14:54.078486 bus /gobi_6: Setting Powered False 01:14:55.099989 run create_hlr_db(pid=5704): Terminated: ok {rc=0} 01:14:55.537716 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5706): Launched 01:14:55.869406 run osmo-hlr_10.42.42.2(pid=5707): Launched 01:14:55.990381 run osmo-stp_10.42.42.5: Starting osmo-stp 01:14:56.564668 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5709): Launched 01:14:56.894908 run osmo-stp_10.42.42.5(pid=5710): Launched 01:14:57.014195 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:14:57.591127 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5712): Launched 01:14:57.708781 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:14:57.996698 run patchelf(pid=5713): Launched 01:14:58.190334 run osmo-stp_10.42.42.5(pid=5710): ERR: Terminated: ERROR {rc=1} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5710)] 01:14:58.332167 run osmo-stp_10.42.42.5(pid=5710): stdout: | (launched: 2022-12-09_01:14:56.732294) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:58.474023 run osmo-stp_10.42.42.5(pid=5710): stderr: | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011456928 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:58.610501 run osmo-stp_10.42.42.5(pid=5710): stdout: | (launched: 2022-12-09_01:14:56.732294) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:14:58.745295 run osmo-stp_10.42.42.5(pid=5710): stderr: | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209011456927 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209011456928 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209011456928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:14:58.903090 run patchelf(pid=5713): Terminating (SIGINT) 01:14:59.087926 run patchelf(pid=5713): Terminated: ok {rc=0} 01:14:59.122002 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5710): Process ended prematurely: osmo-stp_10.42.42.5(pid=5710) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5710)] [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 01:14:59.132005 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:14:59.196092 run osmo-hlr_10.42.42.2(pid=5707): ERR: Terminated: ERROR {rc=237} [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5707)] 01:14:59.248203 run osmo-hlr_10.42.42.2(pid=5707): stdout: | (launched: 2022-12-09_01:14:55.705785) 01:14:59.301004 run osmo-hlr_10.42.42.2(pid=5707): stderr: | �[0;m�[1;31m20221209011455906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209011455906 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209011455907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209011455907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209011455907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209011455907 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209011455919 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2352/run.2022-12-09_00-40-26/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209011455928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209011455928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209011455928 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:14:59.346176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5700): Terminating (SIGTERM) 01:14:59.388293 run iperf3-srv_10.42.42.10(pid=5701): Terminating (SIGTERM) 01:14:59.430458 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5702): Terminating (SIGTERM) 01:14:59.472754 run iperf3-srv_10.42.42.10(pid=5703): Terminating (SIGTERM) 01:14:59.516401 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5706): Terminating (SIGTERM) 01:14:59.558486 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5709): Terminating (SIGTERM) 01:14:59.600717 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5712): Terminating (SIGTERM) 01:14:59.610410 --- ParallelTerminationStrategy: PID 5700 died... 01:14:59.666968 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5700): Terminated: ok {rc=0} 01:14:59.677080 --- ParallelTerminationStrategy: PID 5701 died... 01:14:59.732786 run iperf3-srv_10.42.42.10(pid=5701): Terminated {rc=256} 01:14:59.742767 --- ParallelTerminationStrategy: PID 5702 died... 01:14:59.798499 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5702): Terminated: ok {rc=0} 01:14:59.808476 --- ParallelTerminationStrategy: PID 5703 died... 01:14:59.864087 run iperf3-srv_10.42.42.10(pid=5703): Terminated {rc=256} 01:14:59.874132 --- ParallelTerminationStrategy: PID 5706 died... 01:14:59.929976 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5706): Terminated: ok {rc=0} 01:14:59.940040 --- ParallelTerminationStrategy: PID 5709 died... 01:14:59.995993 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5709): Terminated: ok {rc=0} 01:15:00.006078 --- ParallelTerminationStrategy: PID 5712 died... 01:15:00.061871 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5712): Terminated: ok {rc=0} 01:15:00.149947 bus /gobi_0: Setting Powered False 01:15:01.272812 bus /gobi_0: Setting Powered False 01:15:02.382181 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5710): Process ended prematurely: osmo-stp_10.42.42.5(pid=5710) [trial-2352↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5710)]